manualFoot massagerItem 47104
Overview
- Foot cover
- Massage heads
- Massage cushion
- Heat button
- Power button
- Power input
- Zipper
Specifications
| Timer: | 15 min |
| Fabric: | Micro plush, wool |
| Size: | 31×29.5×17 cm |
| Weight | 1.3 kg |
Use
- Connect the power adapter to the power input (6) and a wall outlet
- Choose to use as either foot massage or back massage:
Foot massageZip the foot cover (1) onto the massage cushion (3). Sit down in a comfortable chair or couch and place your feet into the foot cover. Do not stand up during the massage.
Back massageUnzip the foot cover (1). Sit down in a chair or couch with a backrest and place the massager on the part of your back that needs the massage.
- Press the Power button (5) to turn on the massager.
- Press the Heat button (4) to turn on the heat during the Press again to turn off the heat
The massager turns off automatically after 15 minutes. Press the Power button to turn it off sooner.Disconnect the power adapter after use.
Cleaning and maintenance
Clean the massager with a damp cloth if it has become dirty. Clean the rest of the massager with a dry cloth. Do not use any abrasive detergents. These can damage the surface.Store the massager in a dry environment and at temperatures between 0 and 40 °C.
Safety information
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.Children should be supervised to ensure that they do not play with the appliance. Use with the provided power adapter only.If you are unsure whether to use the massager due to a medical condition, consult a doctor.Do not use the massager for more than 30 continuous minutes. Do not massage one muscle group for longer than 15 minutes.Do not use the massager if any part of the massager or the power adapter is damaged. For domestic use only.Do not immerse the massager in water.
Specification for power supply
| Input voltage (V) | 100-240V AC |
| Input AC frequency (Hz) | 50/60Hz |
| Output voltage (V) | 12VDC |
| Output current (A) | 2 A |
| Output power (W) | 24 W |
| Average active efficiency (%) | 86.55 % |
| Efficiency at low load (10%) | 82.96 % |
| No-load power consumption (W) | 0.06 W |
www.rubicson.comBox 50435 MalmoSweden2021-04-28
report this ad
[xyz-ips snippet=”download-snippet”]