RunCam 32957956146 Born for RC Fanatics User Manual
Function
Buttons DescriptionWiFi/Mode switch
- Press to turn on/off WiFi.
- Long press to switch video/photo/setting mode.
- Under recording mode: press to pause/continue recording.
- Under setting mode: press to confirm, long press to quit.
Power/Shutter
- Press to start/stop recording/photo shooting.
- Long press for 3 seconds to turn on/off.
- Under setting mode: press to select down.
LED Color DescriptionLED1 Blue (WiFi)Constantly on when being connected, blinks when connecting.
LED1 Orange (Menu Function)
- Constantly on when under setting mode.
- Blinks when updating firmware.
- Constantly on when being connected to the PC/USB disk/Webcam.
LED2 Blue (Video)Constantly on when standby recording, blinks slowly when recording, blinks quickly when SD card is abnormal or missing
LED2 Green (Photo)
- Constantly on when being ready for photo shooting, blinks with every shot.
- Blinks quickly in low power state.
LED2 Red (Charge)Constantly on when charging, go off when fully charged.
/TV-out settings
Video Size1920*、、、、、 The video size increases with resolution and frame rate.
Loop RecordingWith this feature, the recording process continues to record at the beginning, erasing the previously recorded material and replacing it with the new content. The video segment length can be set.
Auto RecordingRecord when turning on.
Metering ModeCenter MeteringCenter Metering evaluates the light in the middle of the frame and its surroundings to adjust the exposure.
Average MeteringAverage Metering uses the light information coming from the entire scene and averages for the final exposure setting.
Spot MeteringCenter Spot Metering evaluates the light in the middle of the frame to adjust the exposure.
TV ModeNTSC/PALTV system to be selected
Power-savingThe camera will turn off automatically if no operations are performed for the length of time selected.
Image FlipOn screen display upside down, recording video upside down.
G-sensorBy measuring proper acceleration (“g-force”) every x seconds selected to make images on screen displayed upright.
Language (OSD Language)English, 简体中文, 繁体中文, Français, Deutsche.OSD Language to be selected.
Buttons BeepingBeep when pressing buttons.
SystemResetRestore the factory default settings.
System informationDisplay the Firmware Version
SD card informationDisplay SD card capacity and usage information.
Format micro SD cardThe data is unrecoverable after formatting the micro SD card, please make a backup copy
Device StatusAfter being connected to the computer by a USB cable, the device is in MSDC mode.
MSDCRemovable Disk
Note: In standby mode, quick press the power button three times to reset to factory settings.
Support APP via WiFiLive PreviewVideo/Photo mode switchVideo/Photo playbackParameter settings
Warning: this product is not applicable for being used as a Dashcam. Please take out the battery while using USB interface for power supply, so as to avoid damage caused by the high temperature inside the battery
Android and iOS APPSearch “RunCam” on Google play and Apple Store, or download on ourwebsite http://www.runcam.com/download
Default password for WiFi function: 1234567890
Parameter
| Field of View (FOV) | FOV 120° |
| Sensor Resolution | 4 megapixels |
| Video Resolution | 1920* / / |
| Video File Format | MOV |
| TV Mode | NTSC/PAL |
| Interface | Micro USB |
| max Micro SD Card Supported | 64G(need class 6 or above, recommend Class 10/UHS-I/UHS-II/UHS-III) |
| Image Flip(Manual/Auto) | 180° Rotation |
| Dimension | 66mm(L)*38mm(W)*21mm(H) |
| Battery Capacity | 850 mAh |
| USB Power Input | DC 5V-15V |
| Working Current | <600mA |
| Weight | 49g(with battery) 35g(without battery) |
References
[xyz-ips snippet=”download-snippet”]