RYOBI Brushless 18V Compact Reciprocating Saw Owner’s Manual
OPERATOR’S MANUAL
MANUEL D’UTILISATION MANUAL DEL OPERADOR
BRUSHLESS 18V COMPACT RECIPROCATING SAW
UNE MAIN SCIE ALTERNATIVE 18 V SANS BALAI CON UNA MANO SIERRA ALTERNATIVA DE 18 V SIN ESCOBILLAS PSBRS01
WARNING:To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.SAVE THIS MANUAL FOR FUTURE REFERENCE
GENERAL POWER TOOL SAFETY WARNINGS
WARNING:Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
- Keep work area clean and well lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
- Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
- Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
- Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
- Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
- Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
- When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
- If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
- Use this product only with batteries and chargers listed in tool/appliance/battery pack/charger correlation supplement 987000-432.
PERSONAL SAFETY
- Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
- Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
- Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
- Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
- Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
- If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
- Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
- Do not wear loose clothing or jewelry. Contain long hair. Loose clothes, jewelry, or long hair can be drawn into air vents.
- Do not use on a ladder or unstable support. Stable footing on a solid surface enables better control of the power tool in unexpected situations.
POWER TOOL USE AND CARE
- Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
- Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
- Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
- Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
- Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
GENERAL POWER TOOL SAFETY WARNINGS
- Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
- Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
- Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
- Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 265° F may cause explosion.
- Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.
SERVICE
- Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
- Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
SAFETY INSTRUCTIONS FOR RECIPROCATING SAWS
- Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a “″live”″ wire may make exposed metal parts of the power tool “″live”″ and could give the operator an electric shock.
- Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the workpiece by hand or against your body leaves it unstable and may lead to loss of control.
- Know your power tool. Read operator’s manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this power tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.
- Always wear eye protection with side shields marked to comply with ANSI Z87.1 when assembling parts, operating the tool, or performing maintenance. Following this rule will reduce the risk of serious personal injury.
- Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule will reduce the risk of serious personal injury.
- Protect your hearing. Wear hearing protection during extended periods of operation. Following this rule will reduce the risk of serious personal injury.
- Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in
- operating condition. Be aware of possible hazards when not using your battery tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.
- Do not place battery tools or their batteries near fire or heat. This will reduce the risk of explosion and possibly injury.
- Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.
- Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.
- Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal injury.
- Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also.
SYMBOLS
| The following signal words and meanings are intended to explain the levels of risk associated with this product. | ||
SYMBOL |
SIGNAL |
MEANING |
| |
DANGER | Indicates a hazardous situation, which, if not avoided, will result in death or serious injury. |
| |
WARNING: | Indicates a hazardous situation, which, if not avoided, could result in death or serious injury. |
| |
CAUTION: | Indicates a hazardous situation, that, if not avoided, may result in minor or moderate injury |
| NOTICE: | (Without Safety Alert Symbol) Indicates information considered important, but not related to a potential injury (e.g. messages relating to property damage). |
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
| Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. | ||
SYMBOL |
NAME |
DESIGNATION/EXPLANATION |
| |
Safety Alert | Indicates a potential personal injury hazard |
 |
Read Operator’sManual | To reduce the risk of injury, user must read and understand operator’s manual before using this product. |
 |
Eye Protection | Always wear eye protection with side shields marked to comply with ANSI Z87.1. |
 |
Wet Conditions Alert | Do not expose to rain or use in damp locations |
 |
No Hands Symbol | Failure to keep your hands away from the blade will result in serious personal injury. |
 |
Recycle Symbol | This product uses lithium-ion (Li-ion) batteries. Local, state or federal laws may prohibit disposal of batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options. |
V |
Volts | Voltage |
min |
Minutes | Time |
 |
Direct Current | Type or a characteristic of curren |
 |
No Load Speed | Rotational speed, at no load |
 |
Per Minute | Revolutions, strokes, surface speed, orbits etc., per minute |
FEATURES
PRODUCT SPECIFICATIONS
Switch.. Variable SpeedStroke Length 5/8 in.Strokes per minute (SPM). 0-3,000/min
ASSEMBLY
WARNING:Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled or with damaged or missing parts could result in serious personal injury.
WARNING:Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury
TROUBLESHOOTING
LED LIGHT FUNCTIONS
TOOL STATUS |
LED LIGHT SCENARIO |
ACTION REQUIRED |
| Normal | Solid Light (No Flashes) | No Action Needed |
| Low Battery | 3 Flashes | Replace Battery |
| Excessive Force | 6 Flashes | Wait 5 Seconds |
| Over Temperature | 9 Flashes | Let Tool Cool Off |
PSBRS01
A – Saw blade (lame de scie, hoja de la sierra)B – Blade clamp lever (levier de lame, palanca de la mordaza de la hoja)C – Variable speed switch trigger (gâchette de commande de vitessevariable, interruptor de velocidad variable)D – Lock-off button (bouton de verrouillage, botón del seguro de apagado)E – LED light (lampes à DEL, luces de diodo luminiscente)
Figure 1
A – Locked position (position verrouillée, posición de bloqueo)B – Unlocked position (position déverrouillée, posición de desbloqueo)
Figure 2
A – Battery port (logement de piles, receptáculo de las baterías)B – Latch(es) [loquet(s), pestillo(s)]C – Battery pack (bloc-pile, paquete de batería)
Figure 3
A – Blade clamp lever (levier de lame, palanca de la mordaza de la hoja)B – To lock (pour verrouiller, para asegurar)C – To unlock (pour déverrouiller, para desbloquear)D – Blade clamp (porte-lame, mordaza de la hoja)E – Blade (lame, hoja)F – Blade shown correctly installed in saw bar (lame correctement installée dans la barre de la scie, la hoja aparece montada correctamente en la barra de la sierra)
GENERAL CUTTING COUPE GÉNÉRAL CORTES GENERALES
Figure 4
PLUNGE CUTTING COUPE PLONGEANTE CORTES DE PENETRACIÓN
Figure 5
METAL CUTTING COUPE DE MÉTAUX CORTES DE METALES
Figure 6
OPERATOR’S MANUAL/BRUSHLESS 18V COMPACT RECIPROCATING SAW
MANUEL D’UTILISATION/UNE MAIN SCIE ALTERNATIVE 18 V SANS BALAI MANUAL DEL OPERADOR/CON UNA MANO SIERRA ALTERNATIVA DE 18 V SIN ESCOBILLAS
PSBRS01
To request service, purchase replacement parts,locate an Authorized Service Center or obtain Customer or Technical Support:Visit www.ryobitools.com or call 1-800-525-2579If any parts or accessories are damaged or missing, do not return this product to the store.Call 1-800-525-2579 for immediate service.Please obtain your model and serial number from the product data plate.This product is covered under a 3-year limited Warranty. Proof of purchase is required.MODEL NUMBER* _______________ SERIAL NUMBER ____________________________*Model number on product may have additional letters at the end. These letters designatemanufacturing information and should be provided when calling for service.
Read More About This Manual & Download PDF:
References
[xyz-ips snippet=”download-snippet”]