Saeco Xelsis SM7583 Automatic Coffee Machine Stainless Steel User Manual

XelsisSM7583, SM7581SM7580, SM7480USER MANUAL

Machine overview (Fig. A)

A1	Control panel	A13	Mains cord with plug
A2	Cupholder	A14	Grind setting knob
A3	The lid of the bean hopper	A15	Bean hopper
A4	The lid of the pre-ground coffee compartment	A16	Brew group
A5	Internal cappuccinatore	A17	Inside of service door
A6	Adjustable coffee and milk dispensing spout	A18	Coffee funnel
A7	Milk tube holder	A19	Coffee residues drawer
A8	Main switch	A20	Coffee grounds container
A9	Socket for cord	A21	Drip tray
A10	Service door	A22	Drip tray cover
A11	‘Drip tray full’ indicator	A23	Water tank
A12	Drip tray release grip

Accessories

A24	Milk container(SM7580, SM7581, SM7583 only)	A28	AquaClean filter
A25	Milk tube	A29	Measuring scoop
A26	Grease tube	A30	Water hardness test strip
A27	Cleaning brush

Control panel

There are multiple versions of this espresso machine, with different control panels. Each version has its own type number. You can find the type number on the data label on the inside of the service door (Fig. 16).Refer to figure B and C for an overview of all buttons and icons. Below you find the description. Use the up and down arrows to scroll through the display and tap the OK icon to select or confirm your choices.

B1. On/off button	B4. Start/stop button	B7. Machine settings
B2. One-touch drink icons	B5. Navigation icons (up, down, back, ok)	B8. Cleaning menu
B3. Menu with 6 more drinks	B6. Display	B9. Personal profiles

SM7480 only (Fig. C)

C1. On/off button	C4. Start/stop button	C7. Machine settings
C2. One-touch drink icons	C5. Navigation icons (up,down, back, ok)	C8. Cleaning menu
C3. Menu with 4 more drinks	C6. Display	C9. Personal profiles

Introduction

Congratulations on your purchase of a Saeco full-automatic coffee machine! To fully benefit from the support that Saeco offers, please register your product at www.saeco.com/care.Read the separate safety booklet carefully before you use the machine for the first time and save it for future reference.To help you get the best out of your coffee machine, Saeco offers full support in 3 different ways:

The separate quick start guide for the first installation and first use.
This user manual is for more detailed information.
Online support and movies: scan the QR code on the front page or visit www.saeco.com/care

Note: This machine has been tested with coffee. Although it has been carefully cleaned, there may be some coffee residue left. We guarantee, however, that the machine is absolutely new.

First installation

To prepare your coffee machine for use, you need to perform a few simple steps such as filling the water circuit and activating the AquaClean filter. These steps are shown in the separate quick start guide.For the best-tasting coffee, you need to brew 5 coffees initially to allow the machine to complete its self-adjustment.The machine has been set up to get the best taste out of your coffee beans. Therefore we advise you not to adjust the grinder settings until you have brewed 100-150 cups (approx. 1 month of usage).

AquaClean filter

The AquaClean filter is designed to reduce limescale deposits in your coffee machine and provide filtered water to preserve the aroma and flavor of each cup of coffee. If you use a series of 8 AquaClean filters as indicated by the machine and in this user manual, you don’t have to descale your machine for up to 5000 cups. With each filter you can enjoy up to 625 cups, depending on the selected coffee varieties and the rinsing and cleaning frequencies.

Preparing the AquaClean filter for activationBefore you place the AquaClean filter in the water tank, you need to prepare it for use:

Shake the filter for about 5 seconds (Fig. 1).
Fully immerse the filter upside down in a jug with cold water for at least 30 seconds. Wait until no more air bubbles come out (Fig. 2).
Push the filter onto the filter connected to the lowest possible point. (Fig. 3)

Activating the AquaClean filterYou need to activate every new AquaClean filter that you use. By activating the AquaClean filter, the machine monitors the capacity of the AquaClean filter and the number of filters used. There are 3 ways to activate the AquaClean filter.

Activating the AquaClean filter during the first installationAfter switching on for the first time, the machine guides you through the first installation steps such as filling the water tank, filling the water circuit, and activating the AquaClean filter. Simply follow the instructions on the screen.
Activating the AquaClean filter when promptedReplace the AquaClean filter when the screen shows the message ‘Replace AquaClean filter?’. Then follow the instructions on the screen to activate the filter properly.Replace the AquaClean filter at least every 3 months, even if the machine has not yet indicated that replacement is required.
Activating the AquaClean filter at any other timeYou can start (re)using the AquaClean filter at any time by following the instructions below.1 Tap the Settings icon and use the up and down icons to select ‘AquaClean’ (Fig. 4).2 Tap the OK icon. When the activation screen appears, tap the OK icon again.3 Follow the instructions on the screen.

Note: In some situations, the machine will tell you that you need to descale the machine before you can install and activate a new AquaClean filter. This is because your machine has to be completely limescale-free before you start to use the AquaClean filter. Follow the instructions on the screen.

Measuring water hardness

During the first installation, you have to set the water hardness. Follow the steps on the screen and use the water hardness test strip supplied. To set the water hardness later, tap the Settings icon and select ‘water hardness’.

Immerse the water hardness test strip in tap water for 1 second. Then wait for 1 minute.
Check how many squares have turned red.
Select the appropriate water hardness setting and tap the OK icon to confirm.

Number of red squares:
Value to be set	1	2	3	4

Brewing drinks

You can select a drink by tapping one of the one-touch drink icons (Fig. 5) or by selecting another drink in the menu by tapping the ‘6 more drinks’ icon (SM7580, SM7581, SM7583 only) or the ‘4 more drinks’ icon (SM7480 only). After selecting a drink, you can personalize it by adjusting the settings (see ‘Personalizing your drinks’).

To brew two cups, first tap a drink and then press the start/stop button twice. You can also brew two cups by tapping a one-touch drink icon twice. The machine automatically carries out two grinding cycles in sequence. This is possible for most drinks.
Tap the profiles icon to brew one of your saved drinks.
Slide the dispensing spout up or down to adjust the height to the size of the cup or glass you are using.

Brewing coffee

Fill the water tank with tap water and fill the bean hopper with beans.Tip: Slide the dispensing spout to the uppermost position for easy access to the water tank.
Tap one of the one-touch drink icons (Fig. 5) or tap the ‘6 more drinks’ icon (SM7580, SM7581, SM7583 only) or the ‘4 more drinks’ icon (SM7480 only) to select another drink.
Use the up and down arrows (Fig. 6) to adjust the coffee strength. Tap the OK button if you want to adjust more settings.
Press the start/stop button at any time to start brewing the selected drink, or after adjusting all settings tap the OK icon if you want to save your settings to a profile (see ‘Creating a profile’).

Brewing milk-based drinks

Fill the water tank with tap water and fill the bean hopper with beans.Tip: Slide the dispensing spout to the uppermost position for easy access to the water tank.
SM7580, SM7581, SM7583: Unscrew the lid of the milk container and fill the milk container with milk (Fig. 7). Then place the metal milk tube in the container. SM7480: Place the metal milk tube directly into a milk container.Always use milk coming directly from the fridge for optimal results.
Open the door of the internal cappuccinatore (Fig. 8) and connect the flexible milk tube to the cappuccinatore (Fig. 9). Then close the door of the internal cappuccinatore again.
Tap one of the one-touch drink icons (Fig. 5) or tap the ‘6 more drinks’ icon (SM7580, SM7581, SM7583 only) or the ‘4 more drinks’ icon (SM7480 only) to select another drink.
Tap the OK icon if you want to adjust the settings. You can adjust the settings to your preference with the up and down arrows (Fig. 6). Tap the OK icon to confirm. Then you can adjust the next setting.
After adjusting all settings, tap the OK icon to save your settings to a profile (see ‘Creating a profile’).
Press the start/stop button at any time to start brewing the selected drink.
Directly after dispensing the milk, the ‘Auto Steam Shoot’ is performed. The machine forces steam through the internal milk system to rinse it quickly.

Brewing coffee with pre-ground coffee

Open the lid and pour one measuring scoop of pre-ground coffee into the pre-ground coffee compartment (Fig. 10). Then close the lid.
After selecting a drink, tap the OK icon and use the up and down arrows to select pre-ground coffee (Fig. 11). Then press the start/stop button.

Note: If you select ground coffee, you cannot adjust the coffee strength and brew more than one drink at the same time.

Dispensing hot water

Press the one-touch ‘Hot water’ icon (Fig. 12).
Press the start/stop button to start dispensing hot water.

Personalizing drinks and creating profilesThis machine allows you to adjust the settings of a drink to your own preference and to save the adjusted drink in a personal profile. The different profiles have different colors. There are two ways to create a profile:

When brewing a drink: Press the OK icon to adjust the settings of the selected drink and after adjusting all settings tap the OK icon to save the personalized drink to a profile.
Via the ‘Profiles’ menu: Select a profile and then personalize the drinks one by one.

Personalizing your drinksYou can adjust the settings to your own preference:

Tap one of the one-touch drink icons or tap the ‘6 more drinks’ icon (SM7580, SM7581, SM7583 only) or the ‘4 more drinks’ icon (SM7480 only) to select your preferred drink (Fig. 5).
Tap the OK icon to adjust the settings. The screen shows the settings you can adjust to your preference. Depending on the type of drink, you can adjust the coffee strength, the volume of coffee and milk, coffee temperature, and taste.
Use the up and down arrows to set your preferred level (Fig. 6) and tap the OK icon to confirm. Depending on the type of drink, the next adjustable setting appears on the screen.
After customizing all settings, tap the OK icon to save these settings to your profile (Fig. 13) and follow the instructions on the screen.

Creating a profile

Tap the Profiles icon repeatedly to select one of the profiles. All profiles have different colors.You can also use the up and down icons to select your profile.
Tap the OK icon to customize the profile.
Use the up and down arrows to select the drink you want to customize and tap the OK icon to confirm.
Use the up and down arrows to adjust the settings to your preference and tap the OK icon to confirm. Customized drinks are marked with an asterisk (*) (Fig. 14).

Adjusting grinder settings

You can adjust the grinder settings by using the grind setting knob inside the bean container. There are 12 different grind settings you can choose from. The lower the setting, the stronger the coffee.

Note: You can only adjust the grind settings when the machine is grinding coffee beans. You need to brew 2 to 3 drinks before you can taste the full difference.

Caution: Do not turn the grind setting knob more than one notch at a time to prevent damage to the grinder.1 Place a cup under the coffee dispensing spout.2 Open the lid of the bean hopper.3 Tap the ESPRESSO icon. Then press the start/stop button.4 When the grinder starts grinding, press down the grind setting knob and turn it to the left or right (Fig. 15).

Handling the brew group

Go to www.saeco.com/care for detailed video instructions on how to remove, insert and clean the brew group.

Removing the brew group from the machine

Switch off the machine by pressing the main switch on the back of the machine.
Remove the coffee grounds container.
Open the service door (Fig. 16).
Remove the coffee residue drawer (Fig. 17).
Press the PUSH button (Fig. 18) and pull at the grip of the brew group to remove it from the machine (Fig. 19).

Reinserting the brew groupBefore you slide the brew group back into the machine, make sure it is in the correct position.

Check if the arrow on the yellow cylinder on the side of the brew group is aligned with the black arrow and N (Fig. 20).• If they are not aligned, push down the lever until it is in contact with the base of the brew group (Fig. 21).
Make sure that the yellow locking hook on the other side of the brew group is in the correct position.• To position the hook correctly, push it upwards until it is in the uppermost position (Fig. 22).
Slide the brew group back into the machine along the guiding rails on the sides until it locks into position with a click. Do not press the PUSH button.
Place back the coffee residues drawer and close the service door. Then place back the coffee grounds container.

Cleaning and maintenance

Regular cleaning and maintenance keeps your machine in top condition and ensures good-tasting coffee for a long time, a steady coffee flow and a perfect milk froth.Consult the table on when and how to clean all detachable parts of the machine. You can find more detailed information and video instructions on www.saeco.com/care.

Cleaning table

Cleaning table

Part description	When to clean	How to clean
Brew group	Weekly	Remove the brew group and rinse it under the tap and let it air-dry.
Monthly	Perform the ‘Brew group clean’ procedure with the Philips coffee oil remover tablet. Select ‘Brew group clean’ in the cleaning menu and follow the instructions on the screen. Go to www.saeco.com/care for detailed video instructions.
Lubrication of thebrew group	Depending on the type of usage. Consult the lubrication table (see ‘Lubricating the brew group	Lubricate the brew group with the Philips grease. Go to www.saeco.com/care for detailed video instructions.
Milk system/internal cappuccinatore	After every day of use	Perform the HYGIESTEAM program in the cleaning menu. Select HYGIESTEAM in the cleaning menu and follow the instructions on the screen. Wipe the outside of the metal milk tube with a damp cloth before placing it into the milk tube holder.
Weekly	Remove and disassemble the internal cappuccinatore (see ‘Cleaning the internal cappuccinatore under the tap’). Rinse all parts under the tap with some washing-up liquid.
Monthly	Perform the ‘DEEP MILK CLEAN’ procedure with the Philips milk circuit cleaner. Select ‘DEEP MILK CLEAN’ in the cleaning menu and follow the instructions on the screen. Go to www.saeco.com/care for detailed video instructions.
Milk container(SM7580, SM7581,SM7583 only)	Weekly	Disassemble the milk container (Fig. 23) and push the ball out with the measuring scoop (Fig. 24). Rinse all parts under the tap or in the dishwasher
Drip tray	Empty the drip tray every day or as soon as the red ‘drip tray full’ indicator pops up through the drip tray (Fig. 25).	Remove the drip tray and rinse it under the tap with some washing-up liquid.
Coffee groundscontainer	Empty the coffee grounds container when prompted by the machine. Clean it weekly.	Remove the coffee grounds container while the machine is switched on and rinse it under the tap with some washing-up liquid.
Water tank	Weekly	Rinse the water tank under the tap
Coffee funnel	Check the coffee funnel weekly to see if it is clogged.	Unplug the machine and remove the brew group. Open the lid of the pre-ground coffee compartment and insert the spoon handle into the coffee funnel. Move the handle up and down until the clogged ground coffee falls down (Fig. 26). Go to www.saeco.com.care for detailed video instructions.

Tip: There is a cleaning calendar on the last page of this user manual. Write down the dates on which you have performed a cleaning action.

Cleaning the brew group

Regular cleaning of the brew group prevents coffee residues from clogging up the internal circuits. Visit www.saeco.com/care for support videos on how to remove, insert and clean the brew group.

Cleaning the brew group under the tap

Open the service door and remove the brew group.
Rinse the brew group thoroughly with water. Carefully clean the upper filter (Fig. 27).
Let the brew group air-dry before you place it back. Do not dry the brew group with a cloth to prevent fibers from collecting inside the brew group.

Cleaning the brew group with the coffee oil remover tabletsOnly use Philips coffee oil remover tablets. Tap the Clean icon and select ‘Brew group clean’. Then follow the instructions on the screen. Visit www.saeco.com/care for detailed video instructions. Lubricating the brew groupLubricate the brew groupregularly to ensure that the moving parts continue to move smoothly. See the table below for the lubrication frequency. Visit www.saeco.com/care for detailed video instructions.

Usage frequency	Nr of drinks brewed daily	Lubrication frequency
Low	5-Jan	Every 4 months
Normal	10-Jun	Every 2 months
Heavy	>10	Every month

Cleaning programs for the internal cappuccinatore

The machine has three programs to clean the internal cappuccinatore. The Auto Steam Shoot cleaning program is automatically performed by the machine after brewing a milk-based drink. You can select the HYGIESTEAM or DEEP MILK CLEAN program by tapping the Clean icon and scrolling through the cleaning menu. Then follow the instructions on the screen.

Auto Steam Shoot: the machine shoots steam through the internal cappuccinatore to quickly rinse it.
HYGIESTEAM: the machine thoroughly cleans the internal milk system with steam. Place the milk tube in the milk tube holder (Fig. 28) and follow the instructions on the screen.
DEEP MILK CLEAN: Perform the ‘DEEP MILK CLEAN’ procedure with the Philips milk circuit cleaner for thorough cleaning of the internal milk system.

Cleaning the internal cappuccinatore under the tap

Open the door of the internal cappuccinatore (Fig. 8).
Remove the internal cappuccinatore by pulling it down (Fig. 29).
Disassemble the internal cappuccinatore by pulling the bottom part off the top part (Fig. 30).
Disassemble all parts (Fig. 31) and clean them under the tap.
Reassemble the internal cappuccinatore.
To place back the internal cappuccinatore, put it in an upright position and make sure the holes are aligned with the two tubes on the machine. Then move the internal cappuccinatore upwards until it locks into place (Fig. 32).
Close the door.Visit www.saeco.com/care for detailed video instructions.

Descaling procedure

Descaling procedurePlease use Philips descaler only. Under no circumstances should you use a descaler based on sulfuric acid, hydrochloric acid, sulfamic or acetic acid (vinegar) as this may damage the water circuit in your machine and not dissolve the limescale properly. Not using the Philips descaler will void your warranty. Failure to descale the appliance will also void your warranty. You can buy Philips descaling solution in the online shop at www.saeco.com/care.

When the machine asks you to descale it, press the start/stop button to start. To start descaling without being prompted by the machine, tap the Clean icon and select ‘Descale’.
Remove the drip tray and the coffee grounds container, empty them, and put them back into place.
Remove the water tank and empty it. Then remove the AquaClean filter.
Pour the whole bottle of Philips descaler in the water tank and then fill it with water up to the CALCCLEAN level. Then place it back into the machine.
Place a large container (1.5 l) under the coffee dispensing spout.
Place the milk tube on the milk tube holder.
Follow the instructions on the screen to start the descaling procedure. The descaling procedurelasts approx. 30 minutes and consists of a descaling cycle and a rinsing cycle.
Once the descaling cycle is finished, you need to rinse the water tank and water circuit. Follow the instructions on the screen.
Place a new AquaClean filter in the water tank.

Tip: Using the AquaClean filter reduces the need for descaling!

What to do if the descaling procedure is interruptedYou can exit the descaling procedure by pressing the on/off button on the control panel. If the descaling procedure is interrupted before it is completely finished, do the following:

Empty and rinse the water tank thoroughly.
Fill the water tank with fresh water up to the CALC CLEAN level indication and switch the machine back on. The machine will heat up and perform an automatic rinsing cycle.
Before brewing any drinks, perform a manual rinsing cycle. To perform a manual rinsing cycle, first dispense half a water tank of hot water and then brew 2 cups of pre-ground coffee without adding ground coffee.

Note: If the descaling procedure was not completed, the machine will require another descaling procedure as soon as possible.

Error codes

Below you find a list of the error codes showing problems that you can solve yourself. Video instructions are available on www.saeco.com/care. If another error code appears, please contact the Philips Consumer Care Center in your country. For contact details, see the warranty leaflet.

Error code	Problem	Possible solution
1	The coffee funnel is clogged.	Switch off the machine and unplug it. Remove the brew group. Then open the lid of the pre-ground coffee compartment and insert the spoon handle. Move the handle up and down until the clogged ground coffee falls down (Fig. 26). Visit www.saeco.com/care for detailed video instructions.
3	The brew group is dirty or not well-greased.=	Switch off the machine with the main switch. Rinse the brew group with fresh water, let it air-dry and then lubricate it. Consult chapter ‘Cleaning the brew group’ or visitwww.saeco.com/care for detailed video instructions. Then switch the machine on again.
4	The brew group is not positioned correctly.	Switch off the machine with the main switch. Remove the brew group and reinsert it. Make sure that the brew group is in the correct position before you insert it. Consult chapter ‘Handling the brew group or visit www.saeco.com/care for detailed video instructions. Then switch the machine on again.
5	There is air in the water circuit.	Restart the machine by switching it off and on again with the main switch. If this works, dispense 2-3 cups of hot water. Descale the machine if you have not done so for a longer period of time.
The AquaClean filter was not prepared properly before installation or it is clogged.	Remove the AquaClean filter and try again to brew a coffee. If this works, make sure that the AquaClean filter is prepared properly before you place it back (see ‘Preparing the AquaClean filter for activation’). Put the AquaClean filter back into the water tank. If this still does not work, the filter might be clogged and needs to be replaced.
14	The machine is overheated.	Switch the machine off and switch it back on again after 30 minutes.

Ordering accessories

To clean and descale the machine, only use the Philips maintenance products. These products can be purchased from your local retailer, from the authorized service centers, or online at www.saeco.com/care. To find a full list of spare parts online, enter the model number of your machine. You can find the model number on the inside of the service door. Maintenance products and type numbers:

Descaling solution CA6700
AquaClean filter CA6903
Brew group grease HD5061
Coffee oil remover tablets CA6704
Milk circuit cleaner CA6705
Maintenance kit CA6707

Troubleshooting

This chapter summarizes the most common problems you could encounter with the machine. Support videos and a complete list of frequently asked questions are available on www.saeco.com/care. If you are unable to solve the problem, contact the Consumer Care Center in your country. For contact details, see the warranty leaflet.

Problem	Cause	Solution
The drip tray fills upquickly.	This is normal. The machine uses water to rinse the internal circuit and brew group. Some water flows through the internal system directly into the drip tray.	Empty the drip tray every day or as soon as the red ‘drip tray full’ indicator pops up through the drip tray (Fig. 25). Place a cup under the dispensing spout to collect rinsing water.
The machine is in DEMOmode.	You pressed the standbybutton for more than 8seconds.	Switch the machine off and then onagain with the main switch on the backof the machine.
The ‘coffee grounds container full’ icon remains displayed.	You emptied the coffeegrounds container while the machine was switched off.	Always empty the coffee grounds container while the machine is switched on. If you empty the coffee grounds container when the machine is switched off, the coffee cycle counter is not reset.
You placed back the coffee grounds container too fast.	Do not place back the coffee grounds container until the screen prompts you to put it back.
The ‘coffee grounds container full’ icon is displayed even though the container is not full.	The machine did not reset the counter the last time you emptied the coffee grounds container.	Always wait approx. 5 seconds when you place back the coffee grounds container. In this way, the coffee grounds counter will be reset to zero.
Always empty the coffee grounds container while the machine is switched on. If you empty the coffee grounds container when the machine is switched off, the coffee grounds counter will not be reset.
I cannot remove thebrew group.	The brew group is not in the correct position.	Reset the machine in the following way: place back the drip tray and the coffee grounds container. Then close the service door and switch the machine off and back on again. Try again to remove the brew group.
You have not removed the coffee grounds container.	Remove the coffee grounds container before you remove the brew group.
I cannot insert the brewgroup.	The brew group is not in the correct position.	Reset the machine in the following way: place back the drip tray and the coffee grounds container. Leave the brew group out. Close the service door and switch the machine on and off. Then put the brew group in the correct position and reinsert it into the machine.
The coffee is watery.	The brew group is dirty or needs to be lubricated.	Clean and lubricate the brew group.
The grinder is set to a too coarse setting.	Set the grinder to a finer (lower) setting.
The coffee settings have been adjusted.	Select your coffee drink and adjust the settings to a stronger coffee.
The machine is performing its self-adjustment procedure after a change in grinder settings or bean types.	Brew a few cups of coffee.
The coffee is not hotenough.	The cups you use are cold.	Preheat the cups by rinsing them with hot water.
The temperature is set too low. Check the menu settings.	Set the temperature to ‘high’ in the menu.
You added milk.	Whether the milk you add is warm or cold, it always decreases the temperature of the coffee to some extent.
Coffee does not comeout or coffee comes outslowly.	The AquaClean filter was not prepared properly for installation or it is clogged.	Remove the AquaClean filter and try to brew a coffee again. If this works, make sure the AquaClean filter is prepared properly before you place it back. Place back the prepared filter. If this still does not work, the filter might be clogged and needs to be replaced.
The grinder is set to a too fine setting.	Set the grinder to a coarser (higher) setting.
The brew group is dirty.	Clean the brew group.
The coffee dispensing spout is dirty.	Clean the coffee dispensing spout and its holes with a needle.
The machine circuit is blocked by limescale.	Descale the machine.
The milk does not froth.	The internal cappuccinatore is dirty or not inserted correctly.	Clean the internal cappuccinatore and make sure that you position and insert it correctly (see ‘Cleaning the internal cappuccinatore under the tap’).
The type of milk used is not suitable for frothing.	Different types of milk result in different amounts of froth and different froth qualities. We have tested the following milk types which proved to deliver a good milk froth result: semi-skimmed or full-fat cow’s milk, soy milk, and lactose-free milk.
The milk is splashing.	The milk you use is not cold enough.	Make sure you use cold milk coming directly from the fridge.
The flexible milk tube is not connected properly.	Open the door of the coffee dispensing spout (Fig. 8) and check if the flexible milk tube is fully connected to the cappuccinatore (Fig. 9). Note that the cappuccinatore and milk tubes may be hot. Let the cappuccinatore and the tubes cool down before you touch them.
The cappuccinatore and milk tubes are not clean.	Remove and disassemble the internal cappuccinatore (see ‘Cleaning the internal cappuccinatore under the tap’). Rinse all parts under the tap. For thorough cleaning, use the Philips milk circuit cleaner and perform the DEEP MILK CLEAN procedure via the cleaning ( ) menu. Note that if the parts have been cleaned in the dishwasher, they may have become clogged by food particles or detergent residues. A visual check that they are not obstructed is also recommended.
We advise you to perform the HygieSteam program every day: 1) Press ‘Clean’ on the control panel. 2) Select ‘HygieSteam’. 3) Press the start button to start the process, then confirm all steps on the display.
The milk tubes are clogged.	Always store the milk container without the milk tubes in the refrigerator. Leftover milk could accumulate within the milk tubes and block the flow of milk going through the tubes. Rinse the milk tubes before storage.
The machine seems tobe leaking.	The machine uses water to rinse the internal circuit and brew group. Some water flows through the internal system directly into the drip tray.	Empty the drip tray every day or as soon as the ‘drip tray full’ indicator pops up through the drip tray cover (Fig. 25). Place a cup under the dispensing spout to collect rinsing water.
The drip tray is too full and has overflowed which makes it look like the machine is leaking.	Empty the drip tray every day or as soon as the ‘drip tray full’ indicator pops up through the drip tray cover (Fig. 25). Place a cup under the dispensing spout to collect rinsing water.
The machine is not placed on a horizontal surface.	Place the machine on a horizontal surface so that the ‘drip tray full’ indicator works properly.
I cannot activate theAquaClean filter and themachine asks fordescaling.	The filter has not been replaced in time after the AquaClean filter icon flashed and the capacity dropped to 0%.	Descale your machine first and then install the AquaClean filter.
You did not install theAquaClean filter during the first installation, but after having brewed approx. 25 coffees (based on 100ml/3oz cups). The machine has to be completely limescale-free before you install the AquaClean filter.	First, descale the machine and then install a new AquaClean filter. After descaling, the filter counter is reset to 0/8. Always confirm filter activation in the machine menu. Also, do this after filter replacement.
The new water filter doesnot fit.	You are trying to install another filter other than the AquaClean filter.	Only the AquaClean filter fits into the machine.
The machine is making anoise.	It is normal that your machine makes noise during use.	If the machine starts to make a different kind of noise, clean the brew group and lubricate it (see ‘Lubricating the brew group’).
The AquaClean filter was not prepared properly and the air is now drawn into the machine.	Remove the AquaClean filter from the water tank. Shake the filter for about 5 seconds. Immerse the filter upside down in a jug with cold water for at least 30 seconds. Wait until no more air bubbles come out. Place the prepared AquaClean filter back into the water tank. Then dispense 2-3 cups of hot water.

Technical specifications

The manufacturer reserves the right to improve the technical specifications of the product. All the preset quantities are approximate.

Description	Value
Size (w x h x d)	283 x 393 x 489 mm
Weight	10.8 – 12.2 kg
Power cord length	1200 mm
Water tank	11.7 liters, removable
Coffee bean hopper capacity	450 g
Coffee grounds container capacity	15 pucks
Milk container capacity (SM7580, SM7581. SM7583 only)	600 mi.
Adjustable spout height	75-148 mm
Nominal voltage – Power rating – Power supply	See data plate on inside of service door