User Manual
Product Introduction
A. Battery Card SlotB. Erase ButtonC. Screen Lock SwitchD. Metal Writing PenE. Writing Area
Attention
- Do not use this product under the following conditions: Get wetted or immersed in any liquid; Exposed to dusty/humid environment or environment with rapid temperature changes; Under direct sunlight/ultraviolet rays; The place where the temperature is higher than 40 C or is less than 0 C.
- Please use the attached pen for writing and drawing. Do not use ballpoint pens, signature pens, regular pens, etc. to write or draw.
- Do not scratch the screen with sharp objects. Do not drop the product vertically on the ground or subject it to strong impact from other objects.
- When cleaning the tablet, please use a lint-free cloth to wipe gently.
- If the written content cannot be cleared, please replace the battery in time. Do not use unqualified batteries and batteries whose model does not match the writing board.
- Do not disassemble this product without authorization. If the product does not work properly, please contact us for help.
Specifications
| Product Model | WB3 |
| BatteryModel | CR2016 |
| Battery Voltage | 3V |
| Reflective Rate | 25%-30% |
| Product Size | 23.5*17.8*1.13cm |
| Screen Size | 202*126mm |
| Product Weight | 300g |
Contact Us
Contact UsIf you have any questions or suggestions about ourproducts, please contact: [email protected].
Manufacturer
Shenzhen Pangu Chuangzhan Technology Co., Ltd
Address
5th Floor, No. 3, Sifangyuan Industrial Zone, Gushu Community, Xixiang Street, Baoan District, Shenzhen
[xyz-ips snippet=”download-snippet”]