Savio Bluetooth Wireless Earphones TWS-03 User Manual

Table of Contents

Bluetooth wireless earphonesmodel: TWS-03 model: TWS-03

User manual

Thank you for choosing our product!If you are satisfied with the device we encourage you to shareyour opinion on the use of the product.We make all the efforts to ensure our products meet highrequirements of our customer. In case of any questions relatedwith our devices, you can find help through our website:www.savio.net.pl

Before the use of the purchased device, it is recommendedto read the whole user manual.

1. Product scheme

Primary button:Turn ON/OFF,PAUSE/PLAY of the track
Microphone
Volume Up/Next trackchoice
Volume Down/ previous track choice
LED diode mode indicator
Charging connector

2. Earphones charging

2.1 Connect the charging cable to the charging socket in theearphones(red indicator diode will start to backlit in redcolour, indicating that the earphones are being charged).2.2 When the earphones are fully charged, the indicatordiode will be backlit in blue colour.2.3 Earphones are ready to use.

3. Earphones Pairing

SAVIO TWS-03 Earphones can be used together or apart.By default, earphones are connected with each other.When both earphones are on, and only one work, go topoint 3.3 and connect the earphones.

3.1 Pairing two earphones with the transmitting device3.1.1. Press and hold the primary button located on eachof the earphones. You will hear “Power on”.After a proper connection of the earphoneswith each other, you will hear “Paired”.3.1.2. Turn on the Bluetooth mode in the transmittingdevice(i.e. smartphone), then turn on the devicesearch and choose SAVIO TWS-03 from the list.If the earphones have been already paired witha given device, they will be connectedautomatically.3.1.3. After proper connection of the earphones witha transmitting device, you will hear ”Your phoneis connected”, LED diode on the earphones willstart to blink in a 5 seconds intervals.

3.2 Paring one earphone with a transmitting device

3.2.1. Press and hold the primary button located on oneof the earphones. You will hear “Power on”.3.2.2. Turn on the Bluetooth in the transmittingdevice (i.e. smartphone), then turn on the devicesearch and choose SAVIO TWS-03 from the list.If the earphones have been already paired witha given device, they will be connectedautomatically.3.2.3. After proper connection of the earphone witha transmitting device, you will hear “Your phoneis connected”, the LED diode in the earphonewill start to blink in 5 seconds intervals.

3.3 Connection of two earphones (when both earphonesare urned on, and only one is working)3.3.1. Press and hold the primary button located on eachof the earphones. You will hear “Power on”.3.3.2. Make sure, that your earphones are not connectedwith a different device via Bluetooth i.e.smartphone.3.3.3. Double click the primary button on one of theearphones, you will hear “Pairing”. If theearphones are connected with each other, you willhear “Paired”.3.3.4. Earphones are now connected with each otherand ready to use.

3.4. Disconnecting two earphones(when bothare operating, and you want to use only one)3.4.1. Press and hold the primary button located on eachof the earphones. You will hear “Power on”.3.4.2. Make sure, that your earphones are not connectedwith any other device via Bluetooth i.e. smartphone.3.4.3. Double click the primary button on one of theearphones. If the earphones will disconnect witheach other you will hear “Your device isdisconnected”3.4.4. Earphones are now disconnected and ready toconnect with a device.

4. Buttons description:

Primary button – Click and hold: Turn the earphones on/off– Click once while incoming call: picks up the call– Click and hold while incoming call: rejects the call/hangs up– Click once while playback: pause/play– Fast double click: dialling the last called numberButton – Click and hold: volume up– Single click: chooses the next track from the listButton – Click and hold: volume down– Single click: chooses the previous track from the list

5. Package content:

– Wireless Bluetooth earphones Savio TWS-03– Charging cable– 3 pairs of earbuds (2 pairs of silicone pads, 1 pair of foampads, for better comfort and fit and soundproof from theoutside)– User manual

6. Technical specification:

– Bluetooth Version: 5.0– Range: up to 10 meters– Earphones work time on a singlecharging cycle: up to 5 h– Charging time: up to 1,5 h– Stand by time: up to 100 h– Impedance: 32 ?– Frequency response: 20 Hz – 20 kHz– Sensitivity: -38 db– Build-in microphone: Yes– Earphones weight: 18,8 g

7. Important information:

– Blinking red diode on one of the earphones andcommunicate “Battery low” informs about the low batterylevel.– In case when the primary button placed on earphones willnot respond and LED diode will not be backlit, it means thatearphones are depleted and needs to be charged.– To charge earphones it is recommended to use a 1A chargeror charge them from Computer USB port.– When earphones are connected with each other, clickingand holding the primary button on one of them will turn offboth earphones.

We are eager to help you in case of any comments. In orderto do so, please contact us by e-mail at:Opinions of our customers are very important to us, so theproduct was tailored to meet your expectations.