Category: Schlage
-
Passage Lever With Built-in Alarm FE10 User Manual
Passage Lever With Built-in Alarm FE10 User Manual – Passage Lever With Built-in Alarm FE10 User Manual – [xyz-ips snippet=”download-snippet”]
-
Schlage Keypad Lock FE575 Installation Manual
Keypad Lock Model FE575 Installation Instructions Tools Needed Phillips screwdriver Tape Measure Pencil Optional Flathead Screwdriver Wood Block Hammer Prepare for Installation IMPORTANT NOTES DO NOT use a power drill for installation! Use a screwdriver to remove product from packaging. Install and test lock with door open to avoid being locked out. A. Check door…
-
Schlage Control Smart Deadbolts BE467F Datasheet
Schlage Control™ Smart Deadbolts BE467F, Grade 2 Schlage Control™ Smart Deadbolt with Addison trim in Aged Bronze Schlage Control™ Smart Deadbolt with Greenwich trim in Satin Nickel Schlage Control™ Smart Deadbolts mark a new era of electronic access control in the multi-family world. By ushering in the next generation of highly scalable, efficiency boosting capabilities,…
-
Schlage JD-Series One Side Keyed Deadbolt JD60/JD62/JD81 User Manual
JD-Series Models JD60, JD62, JD81 Door Type: Metal, Flat or Beveled Door Thickness: 1³⁄₈” (35 mm)–1³⁄₄” (44 mm) Faceplate: Square Corner, 1” (25 mm) wide Backsets: 2³⁄₈,” (60 mm), 2³⁄₄” (70 mm) For metal door installations, suitable reinforcement is required to support latch…
-
Schlage FE575/FE595 Keypad Lever Preparation Instructions Manual
FE575/FE595 Door Preparation Instructions For Door With No Holes Tools Needed Drill Bits Needed: ¹⁄₈”, ⁷⁄₈”, 1” 2¹⁄₈” Hole Saw Pencil Chisel 1. Measure Door Width If the door is thinner than 1³⁄₈” or thicker than 1³⁄₄”, then the lock will not fit properly on the door. Tape Measure 2 Mark Lock Centerline on…
-
Keypad Entry with Built-in Alarm FE576 Installation Instructions
24046435 Keypad Entry with Built-in Alarm Installation Instructions Model FE576 Tools Needed Phillips screwdriver Optional Tools Tape Measure Pencil Flathead Screwdriver Wood Block Hamme Exterior Keypad, Alarm Interior Optional Latch Faceplate Batteries Pin Wrench Important Notes DO NOT use a power drill for installation! Use a screwdriver to remove product from packaging. Install and test…
-
Schlage Custom FC21 Combined Interior Lock Installation Manual
P518-149 Installation Instructions Model FC21, Combined interior This lock can be installed as passage (hall/closet) or privacy (bed/bath). See the included Privacy function kit. a. Knob/Lever b. Trim c. Exterior chassis d. Latch e. Interior chassis f. Chassis screws g. Backplate h. Faceplate i. Drive-in faceplate j. Latch/strike screws k. Strike…
-
BE-Series Smart Deadbolts BE467F User Manual
BE-Series Smart Deadbolts BE467F User Manual – BE-Series Smart Deadbolts BE467F User Manual – [xyz-ips snippet=”download-snippet”]
-
Schlage Control Smart Deadbolt FE410F Installation Manual
Schlage Control™ Smart Deadbolt with Engage Technology Model FE410F Door Preparation Instructions for Door with No Holes Tools Needed Pencil Pencil Drill Bits Needed Drill and Drill Bits Bit Sizes: ¹⁄₈”, 1” Hole Saw Hole Saws 1″ 2¹⁄₈” Chisel Chisel Hammer Hammer 1 Measure door thickness. If the door is thinner than 1³⁄₈,” or…
-
Schlage Smart Lock Warranty Manual
Schlage Smart Lock Warranty Manual Terms & Conditions Product Warranties Commercial ApplicationsLimited Warranty Schlage Lock Company, LLC (the “Company”) extends a three year limited warranty to the original user of the products manufactured by the Company (the “Products”) againstdefects in material and workmanship from the date of purchase. Certain Products contain restrictions to this limited…
