SENA RUMBA Bluetooth Multi-sport Helmet User Guide

BLUETOOTH® MULTI-SPORT HELMETQUICK START GUIDE

RIDE CONNECTED

Rumba is a comfortable and protective Multi-Sport helmet for bicycling, skateboarding, and roller skating.The Rumba with built-in Bluetooth® capabilities allows you to hear GPS navigation, take phone calls and listen to your favorite tunes. You can use the Bluetooth® Intercom to communicate with other Rumba users.

Bluetooth® 4.1

Two-Way Intercom

Intercom up to 400 m (0.2 mi)*

Advanced Noise Control™* in open terrain

GETTING STARTED

  1. This product comes with a Quick Start Guide, which is a basic version of the User’s Guide. A FULL VERSION OF THE USER’S GUIDE CAN BE DOWNLOADED AT SENA.COM.
  2. Update this product for free with the latest firmware to fully enjoy the new advanced features built into this product. Visit sena.com to see how to update your product.
  3. Users can follow Sena on Facebook, YouTube, Twitter, and Instagram to receive the most up-to-date information on products, helpful tips, and all other announcements regarding Sena products.

SENA Technologies, Inc.Customer Support: sena.com

How to Use This GuideThe legend and callouts are here to help you read the illustrations.New technology can be confusing, but we’ve created a simple way to perform actions using illustrations.

Icon LegendTap the button the specified number of timesPress and Hold button for the specified amount of timeAudible prompt

Buttons

Product Details

How to Fit the HelmetFor proper use, the helmet must sit level on the head and low on the forehead. The helmet uses a simple, quick-release buckle system that, once adjusted, can be buckled and unbuckled without changing the tightness. For proper use, the straps must be tight and evenly tensioned.To properly wear your helmet:

  1. Position the helmet on your head with the front covering your forehead. If the helmet is tipped back too far and is not covering your forehead then the helmet is not in the proper position.
  2. Position the strap adjuster centered, just below your ears.WARNING: Always wear the helmet in the proper position on your head with the front of the helmet covering your forehead for maximum protection. Never wear the helmet tipped back as the helmet will be in the improper position causing your forehead to be exposed. All fitment adjustments need to be made with the helmet in the proper position.
  3. Position the helmet halfway down on your forehead with the buckle under your chin and back against your throat. The straps should fit comfortably around both of your ears.
  4. After removing the chinstrap pad, adjust the chinstrap tension at the buckle so the chinstrap is tight and comfortable by pulling the chinstrap end through the buckle to either tighten or loosen as needed.
  5. Secure the excess strap with the “O-Ring” and then attach the “Chinstrap Pad”.Note: Check the chinstrap’s position and tension regularly to ensure proper fit.
  6. Turn the retention system knob clockwise to tighten or counterclockwise to loosen.

WARNING: For maximum protection, this helmet must be fitted and attached properly to the wearer’s head in accordance with the following instructions. If after adjustment the helmet does not fit properly, do not use the helmet. Return it to the retailer or Sena.Sena Utility AppBy simply pairing your phone with your Bluetooth system, you can use the Sena Utility App for quicker, easier setup and management.

  • App Features– Music, Device settings, Quick Start Guide, and User’s Guide.
  • Download– Android: Google Play Store > Sena Utility– iOS: App Store > Sena Utility

Sena Device ManagerThe Sena Device Manager allows you to upgrade firmware and configure settings directly from your PC. Download the Sena Device A manager from sena.com.Basic Operations

Checking the Battery LevelInstruction is for when powering the Bluetooth system on.

Phone PairingThere are three ways to pair the phone.Initially Pairing the Bluetooth systemThe Bluetooth system will automatically enter the phone pairing mode when you initially turn on the Bluetooth system or in the following situation:

  • Rebooting after executing Factory Reset; or
  • Rebooting after executing Delete All Pairings.

With your mobile phone in Bluetooth-pairing mode, select Sena Rumba in the list of devices detected.

The Bluetooth system completes the pairing process.Note:

  • The phone pairing mode lasts for 3 minutes.
  • To cancel pairing, tap the (+) Button or (-) Button.

Pairing When the Bluetooth system is Turned OffWhile the Bluetooth system is off, press and hold the (+) Button and (-) Button for 5 seconds.

With your mobile phone in Bluetooth-pairing mode, select Sena Rumba in the list of devices detected.

The Bluetooth system completes the pairing process.

Pairing When the Bluetooth system is Turned OnWhile the Bluetooth system is on, press and hold the (+) Button for 5 seconds.

With your mobile phone in Bluetooth-pairing mode, select Sena Rumba in the list of devices detected.

The Bluetooth system completes the pairing process.

Mobile Phone

Make a Call with the Voice Dialer

Music Controls

Bluetooth IntercomThe Bluetooth system can be paired with another Bluetooth system for Bluetooth intercom conversation.

Pairing with Intercom BStart/End Conversation with Intercom Friend

Configuration Menu

Troubleshooting

Note: Fault Reset will not restore the Bluetooth system to the factory default settings.

TYPE

 OPERATION BUTTON COMMANDS

Basic Operations

 Power on
Power off
Volume up/down

Mobile Phone

 Answer a call
End a call
Reject a call
Voice dial

Music

 Play/Pause music
Next track
Previous track

Intercom

 Intercom pairing
Start/End intercom

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , , ,