Electric scooterScooter TWO LONG RANGE 2021USER’S MANUAL
Contents of the package and scooter description
Supply content
1x Electric scooter SCOOTER TWO LONG RANGE 20211x Charging adapter1x Hex key set4x Handlebar fastening screw1x User’s manual
SCOOTER TWO LONG RANGE 2021 description
| 1. Speed control2. LED light3. Mechanical brake and bell4. Folding mechanism release lever5. Electric motor / front electric brake6. Power on/off/control panel7. Transport mode lock hook | 8. Charging connector9. Stand10. Battery compartment11. Rear swingarm12. Notch to retain the handlebar in folded mode13. The rear LED light/brake light14. Mechanical disc brake |
Operation
Control panel and application
 |
➊ Bluetooth connected device indicator➋ STANDARD (green indication), SPORT (red indication) mode selected➌ Flashlight on➍ Current speed➎ Battery level➏ Multifunction button |
While using your SCOOTER TWO LONG RANGE 2021, you can also use the “SENCOR SCOOTER” mobile app available for download at Google Play and Apple APP Store.This app offers users for example number of kilometers ridden, the cruise control setting function, and many others.For more information about the app / user’s manual, please refer to www.sencor.cz website.
CAUTION:The adjustment of riding properties should always be performed before starting the ride.
- Short press the multifunction button while the power is off to turn the SCOOTER TWO LONG RANGE 2021 on.
- Hold down the multifunction button for 2 seconds while the power is on to turn the SCOOTER TWO LONG RANGE 2021 off.
- Short press the multifunction button while the power is on to turn on the LED fl ashlight.
- Double-tap the multifunction button while the power is on to switch the mode between STANDARD/SPORT.
Assembling the SCOOTER TWO LONG RANGE 2021
- Unfold the handlebar rod and secure it fi only with the lock lever.
- Make sure that the control unit connectors are connected to the control panel.The connector with the cords must be connected properly to avoid losing later on.
- Carefully connect the handlebar with the handlebar tube. Take care to avoid damage to the connecting wire while it’s being inserted into the steering tube. The LED fl ashlight must point in the ride direction.
- Screw the handlebar and the handlebar tube together. Insert two hex screws from the front and two hex screws from the opposite side as shown. Tighten the screws fi rmly. Regularly check if the screws don’t get loose while using the product.
- Turn on the SCOOTER TWO LONG RANGE 2021
Charging
Check if the battery is fully charged before starting your ride. Turn on the control panel and check the battery level.The charging is performed with the supplied charging adapter. First, remove the rubber cap of the charging connector in the SCOOTER TWO LONG RANGE 2021 and connect the charging adapter. Then connect the adapter to your power outlet. When the charging process is fi nished and the charging adapter is disconnected, cover the charging connector opening again with the rubber cap. Regularly check if the protective cap covers the charging connector whenever the charging does not take place.
The charging indicator is located on the charging adapter and shows 2 statuses as follows:
- Red LED: Indicates the battery charging process
- Green LED: Indicates the battery is fully charged
CAUTION:For charging, use only the original accessories supplied with the appliance. When the battery operating time becomes very short, the battery life has been used up; we recommend that you have the battery replaced at your authorized center.
Recommendation:If the unit is not to be used for an extended period of time, we recommend fully charging the battery once every two to three months. We do not recommend storing the unit with a fl at the battery to prevent irreparable damage to the battery (loss of capacity).
Protecting the battery against excessive discharging
The electric scooter is equipped with the protection of each component against damage due to operational overload and lower battery charging level.
- If the scooter is subject to a higher load for example due to frequent riding uphill or riding up a steep hill, the control unit/battery overheating protection will be enabled, limiting the power for a necessary period of time. The speed will be reduced to a maximum of 15km/h.
- If the battery level drops below 30%, the maximum scooter speed will be limited to 15km/h. If the battery level drops below 25%, the maximum speed will be limited to 10km/h.
CAUTION:Do not repair and/or tamper with the electric scooter (SCOOTER TWO LONG RANGE 2021) protection mechanisms. This will prevent damage to the individual components of the electric scooter (SCOOTER TWO LONG RANGE 2021).
Folding and transport
- The scooter must be turned off. Hold the scooter, unlock the folding mechanism release lever at the bottom of the handlebar tube and push the released level in the ride direction.
- Fold the released handlebar tube towards the rear mudguard and lock it using the hook on the handlebar and notch on the rear mudguard. Correct transport mode folding
- To carry the scooter, hold the SCOOTER TWO LONG RANGE 2021’s handlebar tube. For more convenient transport, we recommend holding the handlebar tube in one-third of its length on the side near the front wheel.
Steering the SCOOTER TWO LONG RANGE 2021
CAUTION:
- Before each ride, use a helmet and protectors to prevent injury in case of falling.
- Before each ride, please check if the mechanical brake is fully functional.
- Place one foot on the scooter tread and gently bounce off the ground with the other foot.
- Once the scooter is in motion, press the speed control lever to start the motor.As soon as the scooter starts on its own, place the other foot on the scooter surface.Note:Motor starting and speed control of your electric scooter can be performed when 5km/h speed is reached.
- Stopping is essential for safe driving. First, release the speed control and then push the mechanical hand brake on the left side of the handlebar.
- Try the fi first turns on a fl at the surface and at slow speed. To turn, move your center of gravity slightly by tilting gently to the desired direction of travel and slowly turning the handlebars.
Safety instructions
This electric SCOOTER TWO LONG RANGE 2021 is designed for entertainment and recreational use. This is not a means of transport. Observe the safety of everyone in both private and public areas, follow the instructions below as well as local traffi c regulations.When meeting pedestrians, pay close attention to your ride and make sure pedestrians are aware of your presence. If you are outside theirthe angle of view, ring the bell, low down, and overtake (overtake from the left in case of right-hand traffic).Higher driving speed means automatically a longer braking path. Keep safe speed in case of an unexpected need to stop and keep a safe distance from others. Even on flat at the surface, you may encounter situations or terrain that cause you to lose balance, skidor other unexpected situations that can cause you to fall. Always pay close attention to driving. Check the mechanical brake, battery charge status, wear of components, and wheels before each ride. In case of loose parts or unusual noises, carry out a thorough check and contact an authorized service center if necessary.
Neither the manufacturer nor the distributor is liable for any lat nancial damages, injuries, accidents, legal disputes, or conflicts resulting from non-observance of the safety instructions.
- Do not drive in the rain and avoid slippery surfaces.
- If you encounter an obstacle on your way, stop and carry the scooter over the obstacle.
- Exercise caution when passing through low-ceilinged areas.
- Do not accelerate downhill and always brake well in advance.If you encounter a steep descent (e.g. a steep hill), stop and guide your scooter.
- Do not add speed while pushing the scooter.
- Always avoid obstacles.
- Avoid carrying heavy luggage on the handlebar.
- Always keep both feet on the scooter tread while riding.
- Operate SCOOTER TWO LONG RANGE 2021 in designated driving areas. Observe the local regulations of the regions, parks, cities, and states where you want to operate the scooter.
- Do not turn sharply at high speeds.
- Do not ride through puddles, water, or in rain.
- Do not ride with another person even in the case of children.
- Do not step on the mudguards.
- Do not touch the brake components.
- Always hold on to the handlebar.
- Do not try to ride up the stairs, down the stairs, or jump with your scooter.
Maintenance and adjustment
The brake mechanism must be adjusted before the fi rst ride. Contact a specialized provider (e.g. a bike service) for proper adjustment. Adjustments cannot be made under warranty or post-warranty service at the manufacturer or distributor.If the brakes are too tight or too loose, use a 4mm hex key and loosen the brake screw anticlockwise to adjust the brake cable length. Then tighten the screw fi rmly.To fine tune, adjust the brake cable tension by turning the nut on the mechanical brake attached to the handlebar.
In the transport mode, there is a screw (4mm Allen) accessible in the handlebar tube joint to tighten its fastening. Before tightening the hex screw in the handlebar tube joint, the hex screws in the joint socket must be loosened first as shown by the arrows on the figure.
Technical specifications
| SCOOTER TWO LONG-RANGE 2021 | |
| Key features | |
| Maximum speed up to 25km/h | |
| Travel range up to 45km | |
| Rear-wheel suspension | |
| Aluminum framework | |
| SENCOR SCOOTER app available at Google Play and APP Store | |
| LED lighting | |
| LED display (mode, speed, battery, lighting, Bluetooth) | |
| Drive | |
| Engine power | 400W |
| Speed | SPORT mode up to 25km/h |
| STANDARD mode up to 20km/h | |
| Range | up to 45km (a 55kg weight |
| up to 37km fd 90kg weight | |
| Cruise control | Yes |
| Maximum climb angle | up to 15° |
| 10-inch front and rear perforated tires | |
| Dual braking system – electrical and mechanical | |
| Disc brake | |
| SENCOR SCOOTER app | |
| Available at Apple App Store and Google Play | |
| Using application security lock | |
| Range, distance ridden, running time, speed, battery level, etc. | |
| Bluetooth 4.1 | |
| Technical specifications | |
| Maximum load | 120kg |
| Dimensions | 112 x44 x 118cm (unfolded) |
| 112 x44 x 51cm (folded) | |
| Weight: | 16kg |
| Working temperature | 0 to 40°C |
| Storage temperature | 0 to 45°C |
| Adapter | |
| Input voltage | 100-240V AC 50/60 Hz |
| Input current | 2A |
| Output voltage | 42V |
| Connector | 0 5.5 x 10mm |
| Battery | |
| Capacity | 15Ah Li-ion |
| Charging time | max. 9 hours |
| Number of cells | 50 |
| Protection against | short-circuit, overvoltage, overcharging, overheating |
| Battery protection against | excessive discharge |
| Input charging voltage | 42V |
| Rated voltage | 37V |
| Charging adapter | Value and accuracy | Unit |
| Manufacturer’s name or trademark, company ID, and address | MN XIN YU POWER (SH ENZH EN) SUPPLY CO.. LTDXVENo.38, yuanxin road, tongue Longgang area, Shenzhen, Guandong914403003601080704W | – |
| Model identification code | XVE083-4200200 | – |
| Input voltage | AC 110-240 | V |
| Input frequency | 50/60″ | Hz |
| Output voltage | DC 42.0 | V |
| Output current | 2.0 | A |
| Output power | 84.0 | W |
| Avenge efficiency in active mode | 86 | 86 |
| Efficiency at low load (10%) | 85.7 | 86. |
| No-load power consumption | 0.18 | W |
| Bluetooth | |
| Version | 4.1 |
| Maximum Transmitter Power | 100mW @ 2.4GHz – 2.4835GHz |
INSTRUCTIONS AND INFORMATION ON DISPOSING OF USED PACKAGING MATERIALSTake the packaging material to a designated municipal waste facility.
DISPOSING OF USED ELECTRICAL AND ELECTRONIC EQUIPMENTThis symbol on products or original documents means that used electric or electronic products must not be added to standard municipal waste. For proper disposal and recycling, take these products to designated collection points. Or in some European Union states or other European countries, the products can be returned to the local retailer when buying an equivalent new product. Correct disposal of this product helps save valuable natural resources and prevents damage to the environment caused by improper waste disposal. Ask your local authorities or collection facility for more details. In accordance with national regulations penalties may be imposed for the incorrect disposal of this type of waste.
For business entities in European Union statesIf you want to dispose of electric or electronic devices, ask your retailer or supplier for the necessary information.
Disposal in other countries outside the European UnionThis symbol is valid in the European Union. If you wish to dispose of this product, request the necessary information about the correct disposal method from the local council or from your retailer. FAST ČR, a.s. hereby declares that the radio device type SCOOTER TWO LONG RANGE 2021 conforms to the 2014/53/EU directive.Changes in the text, design and technical specifications may be made without prior notice and we reserve the right to make such changes.
EU DECLARATION OF CONFORMITY
Product/brand: ELECTRIC SCOOTER / SENCOR
Type/model: SCOOTER TWO LONG RANGE 2021 as factory model E9 MAXDC 37,0V (Li-ion battery 15Ah), IPX4, Class IIIAdapter Input AC 100-240; 50/60 Hz; 2,0A; Class II; IP20 Output DC 42,0V; 2,0A; 84,0W
Manufacturer: FAST CR, a.s.
Cernokostelecka 2111, 100 00 Praha 10, Czech Republic VAT no: CZ26726548
The object of the declaration described above is in conformity with the relevant Union harmonization legislation:
| Directive MD 2006/42/EC | Directive LVD 2014/35/EU |
| Directive RED 2014/53/EU | Directive EMC 2014/30/EU |
| Directive Noise 2000/14/EC | Directive RoHS 2011/65/EU |
The relevant harmonized standards and the other technical specifications:
| EN 60335-1:2012+AC+A11 | EN 60950-1: 2006+A11+A1+A12+A2 |
| EN 62233:2008 | EN IEC 61000-6-1:2019 |
| EN 55014-1:2017 | EN 61000-6-3:2007+A1+AC |
| EN 55014-2:2015 | EN 14619:2015 |
| EN IEC 61000-3-2:2019 | EN ISO 12100:2010 |
| EN 61000-3-3:2013+A1 | EN 60204-1:2006+A1+AC |
| EN 62479:2010 | EN 300 328 V2.1.1 |
| EN 301 489-1 V2.2.0 | EN 301 489-17 V3.2.0 |
Place of issuance: PragueDate of issuance: 11.1.2021Name: Ing. Zdenek Pech Chairman of the BoardSignature:
report this ad
References
[xyz-ips snippet=”download-snippet”]