serenelife Portable Air Conditioner SLPAC805W User Manual

SereneLife SLPAC805W Portable Air Conditioner User Manual

Compact Home A/C Cooling Unit with Built-in Dehumidifier & Fan Modes, Includes Window Mount Kit (8,000 BTU)

Read all instructions carefully before setting up and operating the unit.

Please keep this instruction manual for future reference. This manual is designed to provide you with important information needed to setup, operate, maintain and troubleshoot your portable air conditioner. Failure to follow these instructions may damage and/or impair operation and void the warranty.

User Tips

Please avoid such operations, in case of any safety and health risks.

Such instructions are to be followed, for safety and health concerns.

Precautions

Safety Warnings

Tips

Product Overview

Main Components

  1. Handle
  2. Air Inlet Grille (Up)
  3. Control Panel
  4. Casters
  5. Louver
  6. Air Outlet Grille
  7. Drainage Hole
  8. Air Inlet Grille (Down)
  9. Air Exhaust Duct Assembly
  10. Window Sealing Kit

 

Main Components

Control Panel and Remote Control

  1. Power ButtonPress the button for ON/OFF
  2. Fan Speed ButtonPress the key to choose high/low speed
  3. UP/Down Button for Temperature and TimerUnder cooling mode, press the keys could increase or decrease setting temperature; In timer mode, press the keys to set time powering ON. By pressing the keys together, switch between °C and °F can be made.
  4. Mode ButtonPress the key to choose cooling, fan, dry.
  5. Timer ButtonPress the key at standby mode would set ON time Press the key at ON mode would set OFF time
  6. Temperature and Timer DisplayThe window will indicate temperature and time.
  7. Temperature Switch ButtonThe button is to switch between °C and °F
  8. Sleep buttonThe button is to choose sleep mode.

Operation

Place and Install

Place

  • Place the machine on the horizontal floor near the window.
  • For proper ventilation and best machine performance, keep the appliance at least 50cm from objects nearby.

Install

Air Exhaust Duct Assembly

Step 1:Clip-fixture Type

  1. Measure window size;
  2. Adjust Length of the plate according to window size;
  3. Lock the plate

Step 2:Fix the plate to window

Step 3:Swirl the exhaust pipe assembly (exhaust fitting end) into the rear panel outlet (counterclockwise).

Step 4:Insert the exhaust pipe assembly (exhaust port end) into the window seal panel assembly and screw it up.

Incorrect installation

  • It’s important to keep the exhaust duct smooth. Incorrect installation will affect work of the A/C.
  • Prevent the exhaust duct from sharp bending.
  • Ensure air can ow smoothly in the duct.

Warning

The exhaust duct is designed especially for this model. Don’t replace or lengthen it; otherwise, it will result in failure.

Notice:

The air exhaust duct can stretch up to 1500mm. To avoid bending, stretch it as short as possible

REMOTE CONTROL

Please install the battery correctly before using the remote control.The specific steps are as follows:

  1. Slide to open the battery cover on the back;
  2. Insert 2*AAA（DC1.5V) new batteries and install electrodes correctly when inserted;
  3. Fit the batteries in place.

Warning:

  1. Only AAA DC 1.5V batteries are allowed, never use chargeable batteries or other types of batteries.
  2. Replace both batteries; never mix new battery with old one.
  3. Please remove batteries if the appliance is not to be used for a long time.

Warning:

  1. Never use leaked batteries;
  2. Chemicals in batteries could result in such health hazards as burns. If liquid in batteries splashes to skin or clothes, please wash with clean water in time. If batteries are swallowed, please rinse mouth immediately with clean water and then go to the doctor.
How to Operate

Cooling Mode

  • Under cooling mode, cooling indicator will light on.
  • Temperature Setting is from 60°F to 86°F.
  • Press Fan Speed Button to choose from low/high fan speed.

Fan Mode

  • Under Fan mode, indicator will be on.
  • Press Fan Speed Button to choose from low/high fan speed.
  • Temperature cannot be set under this mode.

Dry Mode

  • Dry indicator will be on under this mode.
  • Remove water plug (see right), insert one end of pipe to drainage hose, the other end would be in water tank or water channel.
  • If ambient Temp. ≥17°C or 62°F compressor starts and follow below sequence: if ambient Temp. ≤15°C or 59°F compressor stops; when it reaches ≥17°C, compressor starts again. (There would be a 3-min delay for compressor protection)
  • Fan runs with a fixed low speed.
  • Temp. is fixed.

Notes: Under dry mode, please dismantle air exhaust duct, or performance will be affected and water full alarm “FL” will buzz.)

Heating Mode (not available for cooling only model).

  • Under this mode, heating indicator will light up.
  • Press UP/DOWN button to select Temp. between 16°C to 30°C (60°F to 86°F)
  • Press Fan Speed button to set low/high speed.

TIMER MODE

  • In standby mode, press Timer button to set ON time. A range of 0 to 24 Hours could be set with UP/DOWN button. Timer indicator will light up in this mode.
  • Under running state，press Timer button to set OFF time. A range of 0 to 24Hours could be set with UP/DOWN button. Timer indicator will light up in this mode.

Clean and Maintenance

Drainage

With self-evaporating system, the appliance could perform better and save energy in a way of cooling down condensor by reusing condense water.

The appliance would display “FL” with buzz sound, if built-in water container is full. After compressor stops, please drain water as follows:

  1. Unplug and dismantle air exhaust duct;
  2. Move the appliance to a right place;
  3. Pull out the water plug, and drain all water;
  4. Re-insert the water plug;
  5. Re-install the air exhaust duct, restart the appliance.

MAINTENANCE

Warning:

In case of electric shock, turn o and unplug before repair or maintenance.

Body Clean
  1. Unplug before cleaning.
  2. Clean with soft and half-wet cloth. In case of damage to appearance or the appliance, never use chemical reagent, such as benzene, alcohol and gasoline.
  3. Never let splash water enter the appliance.

Filter is to be cleaned once every two weeks. If air quality indoor is poor, it has to be washed more often, or performance of the appliance would be lowered due to blocked filter screen. Please follow below instructions for cleaning:

Take o air-inlet grille as indicated in the photo; pull out the filters. Clean the filter in 40°C or 104°F warm water or water with neutral detergent; dry the filter in a cooling area.

Re-install the filter and grille after drying completed; restart the appliance.

Warning:

Do not wash with filter in water above 40°C (104°F) or with irritating detergent such as alcohol, gasoline and benzene. In case of deformation, filters are to be kept away from heat sources and dried naturally in a cooling area. Never operate the appliance when filter is not installed.

Seasonal Maintenance

If the appliance will not be in use for a long time, please maintain by following below steps:

  1. Pull out water plug for drainage.
  2. Run in Fan mode for at least 2 hours to dry internal parts.
  3. Turn off and unplug.
  4. Clean the filter and reinstall.
  5. Dismantle the air exhaust duct and keep it well.
  6. Take o batteries.
  7. Wrap the appliance in a plastic bag and keep in a dry and cooling place

If the appliance haven’t been used for a long time, please pay attention to the following when to be used again:

  1. Make sure water plug and filter are installed.
  2. Never use damaged power cord; Check before use.
  3. Insert batteries.
  4. Assemble other parts according to the instruction.

Common Failures and Diagnosis

Intelligent Error Detection

Troubleshooting

The following table lists the common faults and maintenance methods of this series of portable A/C. When the machine is in abnormal operation, the following table can be used for simple diagnosis and maintenance. If it still can’t be solved, please contact professional maintenance personnel.

Features and Technical Specs

FEATURES:

  • Metal Control Box to Prevent from Fire and Exploding
  • Rotary Compressor
  • Universal Castors for Moving Freely
  • Wifi function
  • Lightweight & Portable A/C Unit
  • Compact Freestanding Room Air Conditioner
  • (3) Operation Modes: AC Cooling / Dehumidifier / Fan
  • Hassle-Free, Quick Setup Cooling
  • Simple Electric Plug-in Operation
  • Convenient Wide-Area Climate Control Room AC Coverage
  • Push Button Control Panel with LED Display
  • Time, Temperature & Fan Speed Adjustment Settings
  • Includes Universal Window Mount AC Exhaust Kit
  • Removable & Washable Air Filter Screen
  • Modern Style, Sleek Body Housing
  • Energy Efficient: Low Power Consumption
  • Low Noise Level Motor
  • Rolling Wheels for Easy Portability
  • Used for Home, Office, School & Business Rooms

WHAT’S IN THE BOX:

  • AC Unit
  • Exhaust Hose
  • Window Installation Plate
  • Remote Control

TECHNICAL SPECS:

  • Power Supply: 115V/60Hz
  • Rated Power: 800W
  • Refrigerant Type: R410a
  • Cooling capacity (ASHRAE): 8,000 Btu/h
  • Cooling capacity (DOE): 5,000 Btu/h
  • Coverage Area: Cools Rooms up to 300 Square Feet
  • Air Flow: 360 Cubic Meters / Hour
  • Operating Modes: Cool / Fan / Dry (Dehumidifier)
  • Moisture Removal / Dehumidifier: 1.1 Liters / Hour
  • Operating Noise Level: 55 dBA
  • Fan Speed Settings: Two Level, Low/High
  • Temperature Unit Selectable: °C / °F (Celsius / Fahrenheit)
  • Adjustable Timer Settings: Up to 24 Hours
  • Construction Material: High Impact Polystyrene (HIPS)
  • Battery Operated Remote Control, Requires (2) x ‘AAA’ Batteries, Included
  • Power Cable Length: 4.3’ ft.
  • Product Dimension (L x W x H): 27.6” x 12.8” x 11.6” -inches

This product can expose you to a chemical or group of chemicals, which may include ”Acrylonitrile” which is known in the state of California to cause cancer, birth defects, or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.

Questions? Issues?We are here to help!Phone: (1) 718-535-1800Email: [email protected]

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,