SETTING UP YOUR HOME USING BOTBOUNDARY STRIPS
USAGE INSTRUCTIONS
- You can cut BotBoundary® strips to shorten them as needed. (18-inch minimum.) If cutting a strip, make sure it’s still long enough to cover the entire area you need to block off. Gaps may cause bot boundaries to malfunction.
- Make sure each BotBoundary strip lies completely flat against the floor, with no overlapping. NOTE: DO NOT place BotBoundary strips on top of one another.
- For best results, place the strips between fixed objects like furniture legs or doorframes, or make a closed loop around an obstacle.
WARNING: For your robot’s cliff sensors to work properly, all runners, rugs, or carpets must be eight inches from any stairs (or it must be continuous and extend over the edge of the stairs). If a runner, rug or carpet edge that is less than eight inches from the stairs cannot be moved, you must use a BotBoundary strip to block off the stairs.
WARNING: Do not place BotBoundary under carpeting or rugs.
WARNING: Do not place BotBoundary strips within 10ft of the dock
Shark BotBoundary Strip Instructions – Shark BotBoundary Strip Instructions –
[xyz-ips snippet=”download-snippet”]