Quick Start Guide
| LC-32Q5220ULC-32Q5230ULC-32Q5240ULC-32Q5250U | LC-32Q5270ULC-32Q5280ULC-32Q5290ULC-32Q5200ULC-32Q5100U |
Help SHARP improve the environment by reducing paper waste.For detailed instructions and feature descriptions, access the full User Manual online.Before using the TV, please read this guide carefully and keep it for future reference.© 2018 Hisense Company Ltd. All Rights Reserved.All material in this Quick Start Guide is the property of Hisense Company Ltd. and its subsidiaries and is protected under the US and International copyright and/or other intellectual property laws. Reproduction or transmission of the materials, in whole or in part, in any manner, electronic, print, or otherwise, without the prior written consent of Hisense Company Ltd., is a violation of Hisense Company Ltd.rights under the aforementioned laws.No part of this publication may be stored, reproduced, transmitted or distributed, in whole or in part, in any manner, electronic or other-wise, whether or not for a charge or other or no consideration, without the prior written permission of Hisense Company Ltd. Requests for permission to store, reproduce, transmit or distribute materials may be made in writing to the following address:USA: Hisense USA Corporation7310 McGinnis Ferry RoadSuwanee, GA 30024CANADA: Hisense Canada Co., Ltd2283 Argentia Road, Unit 16Mississauga, ON, Canada L5N 5Z2MEXICO: Hisense Mexico S. de R.L. de C.V.Blvd. Miguel de Cervantes Saavedra No 301Torre Norte Piso 2, Col. Ampliación GranadaMiguel Hidalgo, Ciudad de México, C.P. 11520“Sharp™”, “Aquos™”, “Quattron™”, and any and all other Sharp product names, logos, slogans, or marks are registered trademarks owned exclusively by Sharp Corporation.“Hisense™”, and any and all other Hisense product names, logos, slogans, or marks are registered trademarks and intellectual property rights of Hisense Company Ltd. and its subsidiaries.This product is sold to you under one or more license agreements between Sharp Corporation and Hisense International (Hong Kong)America Investment Co. Ltd. All other trademarks are the property of their respective holders.
Register Your TV!
Congratulations on the purchase of your new TV! This Quick Start Guide will walk you through a few easy steps to set up your TV. For detailed instructions, access the User Manual on the support pages listed below.Because we value your business, we want to keep you in the know of ‘all things SHARP’. Using your mobile phone, scan the Registration page QR code to register your TV. Depending on the make and model of your phone, you may need to download a QR code scanning app.
| Country | Customer Care Center | SHARP Support Page | REGISTER YOUR TV |
| U.S.A |
|
|
http://www.sharptvusa.com/support/productreg.asp |
| CANADA |
|
|
No need to register |
| MEXICO |
|
|
|
Disclaimer: This Quick Start Guide is intended as a general guideline to help you set up your TV. Images throughout this document are for illustrative purposes only and may differ from the actual product.
Packaged Contents
Your package in which you purchased your new TV contains the following items:
|
|
IMPORTANT:To prevent accidentally discarding items that came with your TV, be sure to check ALL of the foam in the carton box.
- Please check foam for accessories before discarding them.
Required tools and devices
- Wireless router (not included) for Internet connectivity
- Phillips screwdriver (not included) to secure the TV stand
- HDMI and other types of cables (not included) to connect external devices to the TV
- Wall mount bracket (not included) if you prefer to mount the TV to the wall
STEP 1. Attach the TV Stand or Wall Mount Bracket (not included)Attach the TV StandCAUTION:
- Be sure to disconnect the A/C power cord before installing a stand or Wall-Mount brackets.
- The LED display is very fragile and must be protected at all times when installing the legs that form the stand. Be sure to protect the
- TV screen from getting scratched or damaged by any hard objects. In addition, DO NOT exert pressure on the front of the TV at any time because it could crack.
To attach the left and right leg that forms the stand:
- Carefully place your TV face-down on a soft, flat surface to prevent the TV from being damaged or the screen from getting scratched.
- Remove the 2 stands from the foam and then insert the stands into the bottom slots of the TV.
- Use the 4 screws in the accessory bag to secure the base stand to the TV tightly.
Attach the Wall Mount Bracket (not included)
Before you begin the third-party manufacturer instructions, be sure to do the following things:
- Place the TV face down on a clean, safe, and cushioned surface.
- Remove the TV stand if you already attached it.
- Place the spacers (not included) in the corresponding bracket holes.
CAUTION:
- When you attach the mount, be sure to use the spacers (provided by the third-party manufacturer) between the TV and the bracket.
- To prevent internal damage to the TV and ensure it is mounted securely, be sure to use fixing screws (not provided) that are 8 – 10mm in length when measured from the attaching surface of the mounting hook.
Follow instructions provided with the Wall mount bracket.
- To complete the installation, please contact the wall-mount manufacturer or the retailer from which you purchased the TV.
- The selected screws are 8.0 – 10.0 mm in length when measured from the attaching surface of the rear cover.
NOTE: The diameter and length of the screws differ depending on the wall mount bracket model.STEP 2. Connect Devices to your TVCheck to ensure that you have selected the right cables for the ports and that they are connected securely. Loose connections can affect the quality of the picture image and color.
|
TV label |
Port | Cable | External Equipment |
Brief Description |
| ANT/CABLE |  |
 |
 |
Connect an outdoor VHF/UHF antenna. |
| HDMI |  |
 |
 |
Connect a High Definition Multimedia Interface (HDMI) cable from an external device. |
| Connect a High Definition Multimedia Interface (HDMI) cable from an external device. | ||||
| AV IN | VIDEO |  |
Yellow |
Connect a composite video cable and left-right audio cables from an external AV device. |
| L |  |
 |
||
| R |  |
 |
||
| DIGITAL AUDIO OUT |  |
 |
 |
Connect an optical cable from an external digital audio system. |
| USB |  |
 |
Connect a USB device for browsing photos, music, and movies.The unit only recogonizes a USB Memory Stick. | |
| AUDIO
OUT |
 |
 |
Connect headphones to hear audio from the TV. Headphones with microphones are not supported. | |
|
 |
 |
Connect an audio adapter (not provided) from an external analog audio system. | |
| LAN |  |
 |
|
Connect an Ethernet cable to access a network or the Internet. The TV also has a wireless connectivity feature. |
STEP 3. Establish a Network Connection
- Press the
button on the remote control, press the [ ˅ ] button to select Settings, and then press [OK] to enter the Settings menu. - Select Network → Network Configuration.
button on the remote control, press the [ ˅ ] button to select Settings, and then press [OK] to enter the Settings menu.
Establish a wired network connection
Automatically obtain an IP address
- Select Wired LAN. The TV will automatically obtain an IP address and connect to the network.NOTE: The default option of IP Settings Mode is DHCP.
- If the connection fails then “Disconnected” will display for the Ethernet status. Retry or enter the IP Settings, select Manual to input the information again.
Manually enter the IP address
- Select Manual
- Enter the IP Address, Netmask, Gateway, DNS Server 1, and DNS Server 2 in the menu. Next, select Save.
Establish a wireless network connection
The TV can directly receive network signals via a wireless router
- Select Wireless The list of networks will be displayed automatically.
- Select a wireless network from the list, input the password, and select
- If the network connection does not appear in the list, select Refresh to refresh the list or select Add A Network to manually enter SSID and Security mode selection.
Close the network connectionSelect Off. The network connection will close.
| BUTTON | DESCRIPTION |
| Power on / off | |
| INPUT | Change the TV input source |
| Number | Enter Channels / input numbers |
| CC | Turn Closed Captioning On/Off and CC On When Mute |
 |
Dash button / Select a digital sub-channel |
| -(Red / Green /Yellow / Blue) | Special function buttons |
| TV | Live TV |
 |
The button for the Quick setup menu |
 |
D-pad (up/down/left/right navigation buttons) |
| OK | Confirmation button |
| BACK | Return to the previous place in the menu or app |
| EXIT | Exit the application |
 |
Display the Home screen |
| +VOL – | Volume (up/down) |
| +CH – | Channel (up/down) |
 |
Mute and restore sound |
| MTS | Set the audio language(MTS) |
 |
Media content control function buttons |
| NRT | Choose to leave the Video description feature On or Off |
| APPS | All apps |
NOTE: The buttons that appear on your remote may differ from the descriptions that we’ve provided for context.
STEP 4. Begin Using your Remote
- Slide on the back cover to open the battery compartment of the remote control.
- Insert two AAA size batteries. Make sure to match the (+) and (-) ends of the batteries with the (+) and ( – ) ends indicated in the battery compartment.
- Replace the battery compartment cover.
Important Information about the remote and batteries:
- Discard batteries in a designated disposal area. Do not throw them into a fire.
- Remove old batteries immediately to prevent them from leaking into the battery compartment.
- If you do not intend to use the remote control for a long time, then remove the batteries.
- Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin then wash it immediately.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable (NiCd, NiMH, etc.) batteries.
- Do not continue using the remote if it gets warm or hot.Call our Support Center immediately on the support website.
Remote Control Range Information
- The remote control can work at a distance of up to 26 feet in front of the TV set.
- It can work at a 30 degree horizontal or vertical angle.
Program Your Universal Cable or Satellite Remote Control to Operate Your New Television (only for The USA)If you would like to program your other household remote controls to your new television, please refer to the User’s Manual supplied by your Cable or Satellite provider. The Cable or Satellite providers’ User Manuals should include instructions on how to program their remote to your television.A list of codes for the most common Cable and Satellite providers are listed below. Use the code that is associated with your Cable or Satellite provider (if applicable).DIRECTV……0178, 10178, 10019, 10748, 11314, 11660, 11710, 11780, 12049, 10171, 11204, 11326, 11517, 11564, 11641, 11963, 12002, 12183Time Warner Cable……386, 0178, 10178, 400, 450, 461, 456, 0748, 1463, 0463, 10463Comcast……0178, 10178, 10463, 11463, 10748, 11314, 11660, 10171, 11204, 11326, 11517, 11641, 11780, 11785, 11892, 11963, 12002Cox Communications……0178, 10178, 1326, 1463Dish Network.…..505, 627, 538, 720, 659If the code associated with your Cable or Satellite provider is not listed, does not work or you cannot locate the instructions to program your remote, call your local Cable or Satellite provider’s customer service center.If your Cable or Satellite provider does not have a code available, please contact us at one of the phone numbers on Page 1.Using Your Cable Set-top Box or Satellite Receiver Remote as a ‘Universal’ RemoteIf you prefer to use your Cable Set-top Box or Satellite Receiver Remote as a ‘Universal Remote’, then visit the Support page to view a list of the codes.
STEP 5. Power on the TV
Plug the power cord into a power outlet.
Press the Power button on the remote to turn on the TV. A splash screen that shows the logo appears. Next, the First-Time Setup Menu begins by prompting you to choose your language, region, and Time Zone.
After the splash screen that shows the logo appears, begin the first-time setup menu.
|
Screen |
Task |
| Language and Location |
|
| End-User License Agreement |
|
| Usage Mode |
Note: ‘Store Mode and Store Mode(Video Demo Only)’ should only be selected by Retailers who plan to demonstrate the TV. |
| Network Connection |
|
| Product Registration |
|
| Last step of TV setup |
|
STEP 7. Begin to Enjoy your TV
Your Smart TV is easy to use and brag-worthy!Now that you’ve completed the first-time setup menu, the Home screen is your starting point for navigating the TV. Gone are the days where your TV only provides one way for you to be entertained. This showpiece provides you the convenience of watching a program on a live channel, accessing Video on Demand to watch a movie, and many other entertainment options.Using your remote, press the Home button to begin enjoying your TV.Text-to-Speech(TTS) and Video Description functionalities on TVTTS and Video Description can help users to navigate the menus on the screen and hear audio descriptions of relevant programs.Text-to-Speech(TTS) can convert written text into voice text, in this way, it can help people who have a visual impairment to listen to the information they are unable to read. And Video Description is audio narration added to certain programs to describe the main visual elements that visually impaired users may not be able to see.Below are steps to enable the functions:
- Press the button to access Menu, and select Settings to enter the Settings Menu.
- Select Accessibility > Menu Audio or Video Description, you can choose to turn the Menu Audio or Video Description On or Off.
When Menu Audio is turned on, the contents of each menu displayed can be broadcast out.When Video Description is turned on, users can hear the introduction of relevant programs.
Disclaimer: Subscriptions or other payments may be required to access content through some applications. Some or all of the included or downloaded application services in this Sharp, Aquos or Quattron device may not function depending on the Internet connection,local limitations of included applications, or other reasons outside of the Licensors or Manufacturers control. ALL LICENSORS AND THE MANUFACTURER EXPRESSLY DISCLAIM RESPONSIBILITY FOR ANY APPLICATION SERVICE FROM FUNCTIONING AT ANY TIME, FOR CONTENT IN ANY APPLICATION SERVICE, FOR DISRUPTIONS OF SERVICE, LOCAL OR REGIONAL LIMITATIONS, WARRANTIES OF TITLE, NO INFRINGEMENT, AND FOR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. By purchasing this device, you accept such Disclaimer without any claim on any Licensor and/or the Manufacturer at any time and in any territory.
Product Specifications
| Model Name | LC-32Q5220U / LC-32Q5230U / LC-32Q5240U / LC-32Q5250U / LC-32Q5270U / LC-32Q5280U /
LC-32Q5290U / LC-32Q5200U / LC-32Q5100U |
|
| Dimension (W × H × D) | Without Stand | 28.7 × 16.9 × 3.1 inches(729 × 428 × 80 mm) |
| With Stand | 28.7 × 18.6 × 7.1 inches(729 × 474 × 180 mm) | |
| Weight | Without Stand | 8.6 lbs (3.9 kg) |
| With Stand | 8.8 lbs (4.0 kg) | |
| Active Screen Size (Diagonal) | 31.5 inches | |
| Screen Resolution | 1366 × 768 | |
| Audio Power | 6 W + 6 W | |
| Power consumption | 65 W | |
| Power Supply | 120 V ~ 60 Hz | |
| Key Apps | Netflix, Vudu, YouTube, and AppsNow (Some apps only for the USA) | |
| Ports | 2 HDMI ports, 1 USB port, 1 Digital Audio Output, 1 ANT/CABLE Input, 1 left/right Audio Input for Composite, 1 RCA Composite Video Input,1 LAN port for Ethernet,1Earphone Audio Output. | |
| Other features | Dynamic contrast Picture, VES A standard wall mount support, Parental Control and Closed Caption |
Disclaimer: All products, product specifications, and data are subject to change without notice to improve reliability, function, design, or otherwise.
QUICK PROBLEM-SOLVING TIPS
When you experience an issue with your TV, turn it off and on again. If this does not resolve the problem, then refer to the tips below. If the problem is still not resolved, then contact us at one of the phone numbers on Page 1.
|
ISSUES |
POSSIBLE SOLUTIONS |
| No sound or picture |
|
| I have connected an external source to my TV and I get no picture and/or sound. |
|
| When I turn on my TV, there is a delay for a few seconds before the picture appears. Is this normal? |
|
| The picture is normal but there is no sound |
|
| Sound but no picture or black and white picture |
|
| The sound and/or picture is distorted or appears wavy |
|
| The sound and picture is blurry or cut out |
|
| A horizontal or vertical stripe appears on the picture and/or the picture is shaking |
|
| The plastic cabinet makes a “clicking” type of sound |
|
| The remote control does not work |
|
Certification and Compliance
FCC NoticeThis device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’sauthority to operate the equipment.The Wi-Fi Module complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.Declaration of ConformityTrade Name: SHARPModel: LC-32Q5220U / LC-32Q5230U / LC-32Q5240U /LC-32Q5250U / LC-32Q5270U / LC-32Q5280U / LC-32Q5290U /LC-32Q5200U / LC-32Q5100UResponsible Party: Hisense USA CorporationAddress: 7310 McGinnis Ferry Road, Suwanee, GA 30024Telephone Number: 678-318-9060This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
report this ad
©2018. All rights reserved. SHARP and the SHARP logo are registered trademarks of SHARP. Other brand and product names are registered trademarks of their respective owners.
References
[xyz-ips snippet=”download-snippet”]