SHARP Refrigerator – Freezer Instruction Manual

SHARP Refrigerator - Freezer Instruction Manual

 

SJ-PG51P2-BK SJ-PG60P2-BK SJ-FTG18CVP-BK

SJ-PG51P2-DS SJ-PG60P2-DS SJ-FTG18BVP-SL

SJ-PG51P2-DM SJ-PG60P2-DM SJ-FTG21CVP-BK

SJ-PS51P-DS SJ-PS60P-DS SJ-FTG21CVP-SL

SJ-PS51P-BK SJ-PS60P-BK

SJ-PG55P2-BK

SJ-PG55P2-DS

SJ-PG55P2-DM

SJ-PS55P-DS SJ-PS55P-BK

Dear CustomerThank you very much for buying this SHARP product. Before using your SHARP refrigerator, please read this operation manual to ensure that you gain the maximum benefit from it.

• This refrigerator is intended for making ice cubes, refrigerating and freezing food.
• This refrigerator is for household use only, with ambient temperature indicated in the table. The climate class is specified on the rating plate. If the refrigerator operates out of range (ambient temperature range) of the climate class which is rated for that model, it may not be able to maintain satisfactory internal temperatures. If the refrigerator is used at colder temperatures, the refrigerator will not be damaged up to a temperature of +5°C.
• The refrigerator should not be subjected to temperatures of -10°C or below for a long period of time.

Safety information

WARNINGRefrigerantThis refrigerator contains flammable refrigerant (R600a: isobutane) and insulation blowing gas (cyclopentane). Observe the following rules to prevent ignition and explosion.

• Do not damage the refrigerant circuit and also do not allow any sharp objects to have contact with the refrigeration system. The refrigeration system behind and inside the refrigerator contains refrigerant.
• Do not use mechanical devices or other means to accelerate the defrosting process. (This refrigerator has adopted automatic defrosting system.)
• Do not use electrical appliances inside the refrigerator.
• Do not block the space around the refrigerator.
• Do not use flammable sprays, such as spray paint near the refrigerator.
• Do not store flammable sprays, such as spray paint in the refrigerator.
• In the case of failure of the refrigeration system, do not touch the wall socket and use open flames. Open the window and let out the air from the room. Then ask a service agent approved by SHARP for service.

Power cord, Plug, SocketRead carefully the following rules to prevent electric shock or fire.

• Make sure to protect the power cord from being damaged during installation or moving. If the power plug or cord is loose, do not insert the power plug.
• Do not place multiple portable socket-outlets or portable power supplies at the rear of the refrigerator.
• Connect the power plug into the wall socket firmly and directly. Do not use an extension cord or adapter plug.
• Connect the power plug to the socket with the required rated voltage.
• Connect the earth pin to the earth terminal properly.
• Do not touch the power plug with wet hands.
• Disconnect from the main electricity supply by removing the main plug from the socket. Do not remove by pulling the power cord.
• Dust deposited on the power plug may cause fire. Wipe it off carefully.
• Pull out the plug if the refrigerator is not used for a long time.
• If the flexible supply cord is damaged, it must be replaced by service agent approved by SHARP in order to avoid a hazard.

Installation

• Do not install the refrigerator in a damp or wet location. It may cause the damage to the insulation or electrical leak. Dew may also appear on the outer cabinet and it causes rust.
• The refrigerator should be installed flatly and firmly on the floor.

In use

• Do not store volatile and flammable materials such as ether, petrol, propane gas, aerosol cans, adhesive agents and pure alcohol etc. These materials are easy to explode.
• Do not store temperature-sensitive products such as pharmaceutical products in the refrigerator. There are high risks of changes in product quality.
• Do not attempt to change or modify this refrigerator. This may result in fire, electric shock or injury.
• Do not place bottled drinks and cans in the freezer compartment. Especially “Express cool” is in operation, there is a high risk that glass bottles may burst.
• Do not place any object on the top of refrigerator. If the object falls down from the top, it may cause injury.
• Do not hit the glass doors hard. Otherwise, they may break and cause physical injury. <Only for SJ-PG51P2, SJ-PG55P2, SJ-PG60P2, SJ-FTG18CVP, SJ-FTG21CVP>
• This appliance can be used by children aged from 8 years or above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way or understanding the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.

Care and Cleaning

• Unplug the refrigerator first to prevent electric shock.
• Do not splash water directly on the outer cabinet or the interior. This may lead to rusting and deterioration of the electrical insulation.

Trouble

• If you smell something burning, pull out the power plug immediately. Then ask a service agent approved by SHARP for service.
• In case of gas leak, ventilate the area by opening window. Do not touch the refrigerator or the power socket.

Disposal

• Ensure that the refrigerator presents no danger to children while being stored until disposal. (e.g. remove the door to prevent child entrapment.)
• This refrigerator should be disposed appropriately. Take the refrigerator to a professional recycling plant for flammable refrigerant and insulation blowing gases.

CAUTION

Transportation

• When you install or move your refrigerator, use curing mat to protect the floor from being damaged.
• Carry the refrigerator by holding the handles located on the rear and the feet of the bottom. If you lift up the rear refrigerator improperly, it may cause injury.

In use

• Do not touch the compressor unit or its peripheral parts, as they become extremely hot during operation and the metal edges may cause injury.
• Do not touch foods or metal containers in the freezer compartment with wet hands. This may cause frostbite.
• Do not use other than potable water to make ice cubes.
• Do not open or close the door when somebody put a hand near the door. There is a risk that the other people may catch their fingers in the door.
• Do not put oversized object in the pockets of the door. If the object falls down from the pockets, it may cause injury.
• Make sure to handle the glass shelves with care to install or uninstall. If you drop the glass shelves, it may break or cause injury.

Installation

1 Keep adequate ventilation space around the refrigerator.

• The picture shows the minimum required space for installing the refrigerator. The measurement condition of energy consumption is conducted under a different space dimension.
• By keeping greater space, the refrigerator may consume a less amount of power consumption.
• If use the refrigerator in the smaller space dimension than pictured below, it may cause temperature rise in the unit, loud noise and failure.
• The space between the rear of the refrigerator and the wall should be 50mm or more, and less than 75mm. If the space is wider than 75mm, you may get injured by touching compressor and its peripheral parts which are extremely hot during the operation. Overall space required in use

2 Use the two front adjustable feet to place the refrigerator flatly and firmly on the floor.

3 Connect the appliance via a correctly installed socket.

Note

• Place your refrigerator to access the plug.
• Keep your refrigerator out of direct sunlight and do not place next to heat generating appliance.
• Do not place your refrigerator directly on the ground. Insert suitable stand such as wooden board under the refrigerator.
• When you insert the power plug with the door opened, door alarm sounds but it is normal. This sound stops after closing the door.

Casters are located on the bottom of the refrigerator

• The casters allow the refrigerator to move back and forth.

Before using your refrigerator

• Clean the inside parts with a cloth soaked in warm water.
• If you use soapy water to clean, wipe it off thoroughly with water.

Description

1. Freezer light <Only for SJ-PG51P2, SJ-PG55P2, SJ-PG60P2, SJ-FTG18CVP, SJ-FTG21CVP>
2. Movable ice maker You can put the ice maker anywhere in the freezer compartment. It will make ice cubes faster when the ice maker is placed as shown by the picture below.
3. Freezer shelf (Upper) You can change the height of this shelf (4 levels) .
4. Freezer shelf (Bottom)
5. Freezer case Move the partition to fit the size of food.
6. Two-way fresh room door
7. Fresh shelf
8. Deodorizing unit Deodorizing catalyst is installed on the routes of cold air. There is no need to operate and clean.
9. Refrigerator light
10. Refrigerator shelf
11. Hybrid cooling panel The panel cools the refrigerator compartment indirectly from the rear. In this way, food is cooled gently without being exposed to cold air flow.
12. Fruit and vegetable shelf• Moisture plate is installed on this shelf (under side). This plate works for storing food with high moisture freshly.
13. Fruit and vegetable crisper
14. Adjustable foot
15. Magnetic door seal
16. Control panel*1 SJ-PG51P2, SJ-PG55P2, SJ-PG60P2, SJ-FTG18CVP, SJ-FTG21CVP*2 SJ-PS51P, SJ-PS55P, SJ-PS60P
17. Freezer door pocket
18. Egg holder
19. Refrigerator pocket (Upper)
20. Bottle pocket
21. Refrigerator pocket (Bottom)

If you wish to store large items within your refrigerator

• You may remove any shelves or any pockets numbered 2,3,5,6,7,10,13,17,18,19,20,21 in the picture above.
• Cooling performance is not influenced even if you use the refrigerator in the above situation.

Movable ice maker

1) Do not overfill the tray with water. Otherwise the ice cubes will join together when frozen.2) When ice cubes are made, turn the lever clockwise to put the ice into the ice cube box.

Note

• Make sure to place the ice maker flatly not to spill out the water from the ice tray.
• To prevent the ice cube box from being damaged, do not pour oil into it or make ice in it.

Two-way fresh room door

Use the space as Use the space as refrigerator room. fresh room.

How to open the two-way fresh room door1) Lift up the door.2) Insert the door into the frame and push it back to the stopper. It is locked properly.

Useful modes

*1 It may take more time to complete if the operation overlaps with defrosting. This mode starts after defrosting is completed.*2 If you do not stop the alarm, it sounds 30 minutes continuously.

Note

• Extra cool, Express freezing and Express cool are not available at the same time while one of the modes is in operation.
• Avoid opening the door as much as possible during the operations of these modes.

Plasma cluster

Use this feature when you want to keep the inside of the refrigerator clean. The ionizer inside your refrigerator releases clusters of ions, which are collective masses of positive and negative ions, into the refrigerator compartment. These ion clusters inactivate airborne mold fungus.mold fungus

Note There may be a slight odor in the refrigerator. This is the smell of ozone generated by the ionizer. The amount of ozone is minimum and quickly disappears in the refrigerator.

Energy saving

Use this feature when you want to switch the appliance to energy-saving operation

While this feature is operating, the inside temperature of the refrigerator and freezer compartment becomes higher than the normal operation as follows when the temperature is default setting. The displayed temperature is not be changed.

Cancel this mode when you feel the beverages are not cooled enough or ice making takes longer time.

Note The efficiency of power saving depends on the usage environment (controlling temperature, ambient temperature, frequency of opening or closing the door, amount of food).

Control panel (SJ-PG51P2, SJ-PG55P2, SJ-PG60P2, SJ-FTG18CVP, SJ-FTG21CVP)

Note

• When you press one of the keys, all icons flash once and show the standby display.
• Mode icons or indicators in operation light up on the standby display. When Express cool is in operation, the icon flashes on the standby display.
• When there is no operation for approximately 1 minute, the display returns to the standby display automatically. The standby display turns off if there is no operation for another 1 minute.
• If the refrigerator stops because of power failure, the modes except for Extra cool, Express freezing and Express cool operate the same way even after the recovery from electrical outage.

(. .) Turn-on state

Operations of useful modes

Operations of additional modes

Controlling temperature

The refrigerator controls its temperature automatically. However, you can adjust the temperature as below.

How to check the current temperature setting

Setting of Freezer/Refrigerator compartment and Deep freezingFreezer compartment : Adjustable between -13°C and -21°C in step of 1°C and -24°C (Deep Freezing)Refrigerator compartment : Adjustable between 0°C and 6°C in step of 1°C

Deep freezing

• This mode is convenient to keep food in cold temperature than the normal freezing. Set the temperature to -24°C.
• The efficiency of this mode depends on the usage environment (ambient temperature, frequency of opening or closing the door, amount of food). Avoid opening the door as much as possible to keep the temperature inside.
• Do not touch the food by wet hands or put the food into your mouth after “Deep freezing”. These may cause frostbite.
• Temperature indicator changes as the picture below by touching▲ or▼ key.
• The temperature that indicated on the control panel is not the exact temperature inside.

Advanced setting of Freezer/Refrigerator compartment

The temperature of freezer compartment and refrigerator compartment can be adjusted in step of 0.5°C by following the steps a to c.

• a. After the step 1 of “Basic operations”, press 3 seconds or more. (Beep, beep, beep) The current preset temperature returns to “Default setting”.(The display is indicated as the picture on the right.)
• b. Press▲ or ▼ and set the temperature.
• c. Complete the setting. (Same as the step 3 of “Basic operations”.)

Follow the steps a to c again if you want to adjust the temperature in step of 1°C.

• Temperature indicator changes as the picture below by touching▲ or ▼ key.
• The temperature that indicated on the control panel is not the exact temperature inside.

Control panel (SJ-PS51P, SJ-PS55P, SJ-PS60P)

Door Alarm

• When the refrigerator door is left open for over 1 minute, door alarm sounds once, and again after 1 minute.
• If the door is left open for approx. 3 minutes, the alarm sounds continuously.
• The alarm stops after closing the door.

Note

• If you want to light up the indicator, press “F” or “R” button.
• If the refrigerator stops because of power failure, the modes except for Extra cool, Express freezing and Express cool operate the same way even after the recovery from electrical outage.

Operations of useful modes

Note

• Extra cool, Express freezing and Express cool are not available while Energy saving is ON (Beep Beep).

Controlling temperature

The refrigerator controls its temperature automatically. However, you can adjust the temperature as below.

How to check the current temperature settingThe indicator lights up to show the current temperature level by pressing “F” or “R” button.Freezer compartment : Press “F” button.Refrigerator compartment : Press “R” button.

Setting of Freezer/Refrigerator compartment and deep freezing

Freezer compartment

1. Press “F” button.
2. Press “F” button to change the temperature level.

Refrigerator compartment

1. Press “R” button.
2. Press “R” button to change the temperature level.

Deep freezing

• This mode is convenient to keep food in cold temperature than the normal freezing.
• The efficiency of this mode depends on the usage environment (ambient temperature, frequency of opening or closing the door, amount of food). Avoid opening the door as much as possible to keep the temperature inside.
• Do not touch the food by wet hands or put the food into your mouth after “Deep freezing”. These may cause frostbite.
• Temperature indicator changes as the picture below by pressing “F” or “R” button.< Freezer compartment > (3→4→5 Deep freezing 1→2→3)< Refrigerator compartment > (3→4→5→1→2→3)

Note

• After adjusting the temperature level, the indicator turns off approximately 5 seconds later.

Advanced setting of Freezer/Refrigerator compartment

The temperature of refrigerator compartment and freezer compartment can be adjusted in 9 levels (level 1 – 9) and “Deep freezing” (only for freezer compartment ) by following the steps a to b.

Freezer compartment

• a. Press “F” button first.Hold down “F” button and then press “Express freezing” button for 3 seconds or more. (Beep, beep, beep) The indicator returns to “Default setting”.
• b. Press “F” button to change the temperature level.Follow the steps a to b if you want to adjust the temperature in 5 levels.

Refrigerator compartment

• a. Press “R” button first.Hold down “R” button and then press “Express freezing” button for 3 seconds or more. (Beep, beep, beep)The indicator returns to “Default setting”.
• b. Press “R” button to change the temperature level.

Follow the steps a to b if you want to adjust the temperature in 5 levels.

Temperature indicator changes as the picture below by pressing “F” or “R” button.< Freezer compartment > 5→6→7→8→9 Deep freezing 1→2→3→4→5< Refrigerator compartment > 5→6→7→8→9→1→2→3→4→5

Storing food

• Ensure that the food is of the freshest possible quality to maximize the storage life of perishable food. The following is a general guide to help promote longer food storage.
• Food has a limited storage life. Make sure not to exceed use-by date indicated by manufacturer.

Freezer

• Freeze small quantities of food at a time in order to freeze them quickly.
• Food should be properly sealed tightly or covered .
• Place foods in the freezer evenly.
• Label bags or containers to keep an inventory of freezing food.

RefrigeratorFruit / Vegetables

• Fruit and vegetables should be loosely enclosed in a plastic material e.g. wrap, bags (do not seal) and placed in the fruit and vegetable crisper to minimize moisture loss.
• Fruits and vegetables which are easily effected by low temperature should be stored in a cool place except for the refrigerator.

Dairy Products & Eggs

• Most dairy products have their best-before date on the outer packaging which informs the recommended temperature and shelf life of the foods.
• Eggs should be stored in the egg pocket .

Meats / Fish / Poultry

• Place on a plate or a dish and cover with paper or plastic wrap.
• For larger cuts of meat, fish, or poultry, place to the rear of the shelves.
• Ensure all cooked food is wrapped securely or placed in an airtight container.

*Notes for fresh food– Fresh food (securely wrapped) should be stored in limited time to prevent spoilage and badly affecting other stored foods.

Advice for preventing dew or frost inside the refrigerator

• Keep the door securely closed. If the food falls down, it may cause a gap between the cabinet and the door. Move it back to the shelf or the pocket.
• Open and close the door quickly as much as possible. Dew or frost may appear if the door is left open for a long period of time or opening and closing of the door is very often.
• Stored items should be packed or sealed with such as food containers or plastic wraps. (Especially food with high-moisture)

Advice for storing food

• Evenly place the food on the shelves to allow the cooling air to circulate efficiently.
• Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
• Hot food should be cooled before storing. Storing hot food increases the temperature in the unit and the risk of food spoilage.
• Do not block the outlet and inlet of the cool air circulating circuit with food or containers; otherwise the food is not be evenly cooled throughout the refrigerator.
• Do not place food directly in front of cold air outlet. This may lead to the food freezing.

Tips for saving energy

• Install the refrigerator in a well-ventilated area and keep the space to ventilate.
• Keep your refrigerator out of direct sunlight and do not place it next to heat generating appliance.
• Avoid opening the door as much as possible.
• Hot food should be cooled before storing.
• Place the food evenly on the shelves to allow the cool air to circulate efficiently.

Care and cleaning

ImportantFollow the tips below to prevent cracks on the inner surfaces and plastic components

• Wipe out food oil adhered to plastic parts.
• Some household chemicals may cause damage, so use only diluted washing-up liquid (soapy water).
• If undiluted detergent is used or soapy water is not wiped off thoroughly, it may result in cracks of plastic parts.

CleaningFor hygienic reasons, make sure to do following things regularly.

• Remove the accessories (e.g. shelves) from the cabinet and the door. Wash them by warm soapy dishwashing water. After that, rinse them in clean water and dry. (Only fruit and vegetable shelf is not removable)
• Clean the inside with a cloth soaked in warm soapy dishwashing water. Then, use cold water to wipe off soapy water thoroughly.
• Wipe the exterior with a soft cloth each time it gets dirty.
• Clean the magnetic door seal with a toothbrush and warm soapy dishwashing water.
• Wipe the control panel with a dry cloth. <SJ-PG51P2, SJ-PG55P2, SJ-PG60P2, SJ-FTG18CVP, SJ-FTG21CVP>

Note

• Do not use heavy-duty cleansers or solvents (lacquer, paint, polishing powder, benzine, boiled water, etc.) which may cause damages.
• If you pull out the power plug once, wait 5 minutes at least before connecting the power plug again.
• The glass shelves are heavy to carry. Hold them firmly when you remove the shelves from the cabinet.
• Do not drop objects inside the refrigerator or strike the inner wall. This may cause cracks to inner surface.

Before transportingWipe up water in the evaporating pan. Before wiping up the water, wait more than 1 hour after pulling out the plug because refrigeration cycle equipment is extremely hot. (The evaporating pan is located on the rear of the product.)

Defrosting of the cooling unitDefrosting is automatically operated by a unique energy saving system. (Approx. once a day.) Ice making takes time because the temperature inside becomes slightly higher than usual during the defrosting.

When the compartment light is blownContact the service agent approved by SHARP to replace the light. The light is not to be replaced other than by qualified service personnel.

Switching off your refrigeratorIf the refrigerator needs to be switched off for an extended period, the following steps should be taken to reduce the growth of mold

1. Remove all food.
2. Remove the power plug from the socket.
3. Clean and dry the interior thoroughly.
4. Keep all the doors open slightly for a few days to dry.

Before you call for service

Before calling for service, check the following points.

If you still require serviceRefer to your nearest service agent approved by SHARP.

Refrigerant: R600aInsulation blowing gas: Cyclopentane

“Plasma cluster” and “Device of acluster of grapes” are trademarks ofSharp Corporation.