USER MANUAL
INTRODUCTION
Thank you for purchasing the Sharper Image Heating & Cooling Eye Therapy Mask. Please take a moment to read this guide and store it for future reference.
IDENTIFICATION OF PARTS
HOW TO USE
- Long press the power button to turn on.
- Choose your desired mode by pressing the power button until you reach yourdesired mode.
- Mode options: Hot (104° F for 5 minutes), Cool (64° F for 3 minutes) or Auto 104° F for 1.5 minute then 64° F for 1 minute and repeat for a total of 5 minutes.
- Use up to one hour with a full charge. (The indicator power button will flash to remind you to charge the product when the battery is low.)
- Long press the power button to turn off.
Note: The timing of each mode is separately set. The built-in fan will keep blowing for about 30 seconds to cool the product down after shutting off.
HOW TO CHARGE THE HEATING & COOLING EYE THERAPY MASK
- Plug the AC adapter into the charger port of the product.
- Plug the AC adapter into a AC wall outlet.
HOW TO PUT ON AND TAKE OFF THE MASK STRAP
- When putting the strap on, insert the strap metal buckle from the bottom of the hook.
- When taking off the strap, insert the metal buckle from the bottom of the hook.
- Adjust the strap as desired.
WARNINGS
- Do not use the unit on the other parts of body except the face.
- Do not overuse. Use the Hot mode up to 5 minutes a day, Cool mode up to 3 minutes a day and Auto mode up to 5 minutes a day.
- Stop using immediately if you feel too cold or too hot.
- Pay attention to the appearance of your skin after each use.
- The product can be used with the astringent and creams.
- The product is not waterproof. Avoid submerging in water.
HOW TO CLEAN
- Use a non-abrasive cloth to clean periodically.
- If the product will not be used for an extended period of time, store in a place without dust.
- Store away from children.
Note: Do not wipe the product with alcohol. It will cause distortion or discoloration.
TROUBLESHOOTING
If you are unable to troubleshoot with the information below, please contact Sharper Image Customer Service immediately. Please do not disassemble or repair the product yourself.
SPECIFICATIONS
SAFETY PRECAUTIONS
For personal safety, please strictly comply with following precautions.
Warning
- If you are under treatment or have any of the below conditions, you should consult a doctor before use:
- Dermatitis, eczema or skin disease, wounds on the skin, tumors, infectious diseases, paralysis or perceptual disorders, severe blood disorder, or recently had an injury or surgery.
- Stop use immediately if any paradoxical reaction of the skin occurs during use and consult a doctor.
- Use the AC power cord that comes with the product.
- Do not block vent holes or use liquids on the product. It will cause damage.
- Avoid plugging in the adapter with wet hands to avoid electric shock.
- Do not use the power cord if it is damaged. It will cause electric shock and a possible fire.
- Stop to use immediately if the plug or power cord is damaged.
- Never use the product over and over again on the same area. It is will become irritated and cause the skin to be inflamed.
- Do not repair by yourself.
- Do not charge the battery or use in place where the temperature is extremely high.
Attention
- Do not use or store in a place where there is water or heavy moisture.
- Turn the item off when not in use.
- This product is not medical equipment.
BATTERY RECYCLING INFORMATION
The Lithium battery used in this product is recyclable. Please do not discard it as any other products.
In order to protect the earth’s environment, use the recycling methods in accordance with your area.
WARRANTY / CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com include a 1-year limited replacement warranty. If you have any questions not covered in this guide, please call our Customer Service department at 1 (877) 210-3449. Customer Service agents are available Monday through Friday, 9:00 a.m. to 6:00 p.m. ET.
Read More About This User Manuals…
Questions about your Manual? Post in the comments!
[xyz-ips snippet=”download-snippet”]