SHARPER IMAGE Replacement Blade/Foil Set Instructions

SHARPER IMAGEREPLACEMENT BLADE/FOIL SET

FOR WORLD’S FASTEST CORDLESS FOIL SHAVER AND TRIMMERItem No. 207142

HOW TO

CHANGING THE FOILS

With normal use, the foils should last a long time. However, if the foils become damaged, you can  replace them easily at home. For best performance, it is recommended to change the blades at  the same time as the foils.

FIG. 1HOLD THE SHAVER FIRMLY  WITH ONE HAND ON THE  SHAVER HEAD AND ONE HEAD  ON THE BODY [FIG. 1].

FIG. 2REMOVE THE SHAVER HEAD  FROM THE BODY [FIG. 2].

FIG. 3USING A SMALL BLADE OR SCREWDRIVER, CAREFULLY LIFT OUT  THE FOILS FROM THE SIDE, ONE AT A  TIME [FIG. 3-4].

FIG. 4

FIG. 5USING YOUR HANDS ONLY,  CAREFULLY INSERT THE NEW  FOILS INTO THE SHAVER HEAD  UNTIL THEY ARE PROPERLY  SNAPPED IN PLACE. DO NOT  USE TOOLS, AS THIS MAY  DAMAGE THE FOILS [FIG. 5].

CHANGING THE BLADES

FIG. 6WITH THE SHAVER HEAD DETACHED FROM THE BODY,  GRASP ONE BLADE WITH YOUR  THUMB AND INDEX FINGER. HOLD  THE BODY FIRMLY WITH THE  OTHER HAND [FIG. 6].

FIG. 7ROCK THE BLADE SIDE TO  SIDE, APPLYING GENTLE  PRESSURE UNTIL IT LIFTS  OFF THE BODY [FIG. 7].  REPEAT THIS STEP FOR THE  OTHER BLADES.

FIG. 8ATTACH THE NEW BLADES,  USING FIRM BUT GENTLE  PRESSURE [FIG. 8]. FINALLY,  REPLACE THE SHAVER HEAD.

The SHARPER IMAGE® name and logo are registered trademarks.  ©Sharper Image. All Rights Reserved.