Shure DL4 DuraPlex™ Lavalier Microphones
General Description
The Shure DuraPlex DL4 is a professional MEMS condenser lavalier microphone that is ideal for both speech and performance applications in challenging environments. The IP57 rated omnidirectional lavalier is dust resistant and waterproof, manufactured for use in applications that require extended durability, uncompromised sound quality, and reliability. The subminiature design and various mounting options provide discrete placement in applications for film, television, education, and corporate events. Each microphone is supplied with a storage pouch, single tie clip, sticky vocal presence frequency response cap, snap fit windscreen, foam windscreen, and TA4F threaded adapter.
Features
- IP57 Certified dust resistant and waterproof/sweatproof headset
- 5mm omnidirectional subminiature design for discrete placement and improved gain before feedback
- 1.6mm PLEX Cable technology, paintable cable, and no memory effect
- Professional sound quality for speech and performance applications
- High RF immunity, compatible with digital wireless systems without RF interference
- Attachable Presence Cap included for tailored frequency response in speech applications
- Included furnished accessories for storage, mounting options, and wind protection
- TA4F and LEMO terminations for variable wireless system connectivity
- Included sticky mount (adhesive patch sold separately) for application requiring placement underneath clothing
- Available in Black, Tan, Cocoa finishes
Care and Maintenance
The DuraPlex omnidirectional microphone has been IP57 dust-protected, waterproof rated by extensive internal tests, so you can clean it using distilled water and a mild detergent when necessary.
DuraPlex Accessories
Presence Cap
Frequency Response
Attaching the Windscreen
There are two windscreens for use with the DuraPlex microphone:
- A slide-fit windscreen for use with the presence cap
- A snap-fit windscreen for use without the presence capNote: Do not use the snap-fit windscreen with the presence cap–the presence cap can become caught inside the snap-fit windscreen.
Tie Clip
Dual Tie Clip
Sticky Mount
Lavalier Distance
Threaded Mount Instructions
Accessories
Furnished Accessories
Accessories are available in Black (/B), Tan (/T), Cocoa (/C), and White (/W) color varieties. Please consult your Shure representative for available options.
Optional Accessories
Replacement Parts
Wiring and Termination
Typical Wiring Table
Note: The conductors have a black, protective coating that you must remove with isopropyl alcohol to see their actual color.
MTQG Connector Assembly
Exploded View
Note: Make sure to solder the shield to ground collar.
Assembled View
Specifications
Note:
- All specification values are based on using a typical bodypack with 5 V bias input or the RPM400MTQG preamplifier. When using the RPM400LEMO amplifier, refer to the RPM400LEMO specifications.
- All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity.
Microphone Capsule
MEMS
Polar Pattern
Omnidirectional
Frequency Response
20 Hz to 20 kHz
Sensitivity
-42.5 dBV at 1 kHz [1]
Self-Noise, A-Weighted, Equivalent Acoustical
31 dB SPLA
Signal-To-Noise Ratio [2]
63.0 dB
Maximum SPL [3]
132.0 dB SPL,1 kHz at 1% THD, typical
Dynamic Range
101.0 dB typical
Microphone Current Draw
220 µA, maximum
Bias Voltage
Recommended Operating Voltage
5 V DC, 2.6 V DC minimum
Housing
Molded ABS
Polarity
Cable Diameter
1.6 mm
Cable Length
66 in. (1.67 m)
Net Weight
[1]1 Pa=94 dB SPL[2]
S/N ratio is the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted[3]
THD of microphone preamplifier when applied input signal level is equivalent to cartridge output at specified SPL
Dimensions
Frequency Response
Certifications
Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC performance.
The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
Email:
Shure DL4 DuraPlex Lavalier Microphones User Manual – Shure DL4 DuraPlex Lavalier Microphones User Manual –
[xyz-ips snippet=”download-snippet”]