RMCE-TW1Shure True Wireless Secure Fit Adapters
AONIC 215 True Wireless Sound Isolating™ Earphones The best sound starts with a good fit
- Select the sleeve that provides a snug fit (like earplugs).
- Secure the adapter behind the ear to maintain a tight seal.
To keep them sounding their best…
- Clean regularly to remove debris and deposits.
- Contact Shure Service and Repair to replace damaged product. Simply detach and return the broken earpiece for easy replacement.
Bluetooth® Pairing
Earphones automatically enter pairing mode when you first power them on or when they have not been previously paired with this audio source.
- Put the earphones on your head.
- Press and hold button on the right adapter. Continue to hold after you hear “Power on”.
- From your audio source, select “Shure TW1.”
- After a pause (about 4 seconds) you will hear “Connected”.
- Press and hold the button on the left adapter until you hear “Power on”.
Manual pairing
- Turn off the earphones.
- Put the earphones on your head.
- Press and hold button on the right adapter. Continue to hold after you hear “Power on”.
- When you hear “Bluetooth pairing mode” (about 5 seconds), release the button.
- From your audio source, select “Shure TW1.”
- After a pause (about 4 seconds) you will hear “Connected”.
- Press and hold the button on the left adapter until you hear “Power on”.
Notes: Secure Fit Adapters automatically pair with previously paired devices when you power them on. After a few seconds you will hear “Connected”.
To control listening features with your device, download the free ShurePlus™ PLAY app for iOS and Android.
Changing Sleeves
- Gently twist and pull to remove sleeve.
- Install the new sleeve so it completely covers the barb and nozzle.
Detachable Adapters
You may need to detach the earphones from the Secure Fit Adapters to attach optional components or to replace either one if they become damaged. To prevent accidental separation, the connector has a snug fit. Take special care to prevent damage to the earphone and connector.
- Do not use pliers or other tools.
- Grasp the connector and the earphone as close as possible to where they join.
- Pull straight apart—do not twist. The connector is a snap fit, not threaded.Note: If you pull at an angle, the connector will not detach.
- Do not pull on the adapter or put any pressure on the earphone nozzle.
- Listen for a click when connecting.
- When reattaching the module, match the “L” and “R” markings. For clear earphones, match the color dots (Red=Right, Blue=Left).
Visit http://www.shure.com/earphones for replacement parts and important instructions on cleaning and maintenance.
Button
ShurePlus PLAY Mobile Listening App
General Description
The ShurePlus PLAY Mobile Listening App is a high-resolution music player with advanced EQ controls. Play uncompressed audio files with your iOS or Android mobile device using the music tab. Use built-in Shure EQ presets to customize the sound, or create your own EQ presets in the settings tab. Unlock environment mode and ANC features by connecting to Shure wireless and True Wireless products in the device tab.
Features
- Import and play multiple, high-resolution and standard file types
- Customize presets with the parametric graphic EQ
- Adjust your volume with the full-screen fader
- Create playlists and organize your music library by playlist, artist, album title, song title, genre, or composer
- Quickly dial in your sound with EQ preset modes for a variety of listening situations.
Environment mode
Environment mode allows you to accentuate the ambient noise around you. This is especially useful when you want to listen to music or are on a phone call, yet you still want to be aware of the sounds around you.
To use environment mode:
- Double press either adapter
- Use the switch in the ShurePlus PLAY app
In the ShurePlus PLAY app, you can adjust the environment mode across ten levels:
Create Custom Presets
Add new preset
- Tap Settings > EQ to access the equalizer.
- Scroll down to tap Add New Preset
- Adjust your frequency, gain, and bandwidth parameters. There are three ways to adjust your equalizer. Tap the values to type in a specific number. Tap the – or + to adjust in larger increments. Or, tap and drag the numbered circles for bigger changes.
- Tap the check mark to save your new customized preset.
Duplicate a Preset
- Select one of the five preset modes and tap Duplicate.
- Tap the More Options 3 dots. Tap Edit EQ Preset.
- There are three ways to adjust your equalizer. Tap the values to type in a specific number. Tap the – or + to adjust in larger increments. Or, tap and drag the numbered circles for bigger changes.
- Tap the check mark to save your new customized preset.
Use Screen Orientation to Adjust EQ
Hold your device in portrait mode to enter numberical EQ parameters. Rotate to landscape mode for a close-up view of the curve.
Use portrait mode to easily select and adjust frequency, gain, and bandwidth.
Use landscape for a close-up view of your EQ curves.
Preset Modes
Use presets to quickly access commonly used listening scenarios. Five selectable 4-band presets optimize settings for gain, equalization, and compression. Play a song and find the preset that you think suits the song best. Then adjust levels as needed.
Firmware
Firmware is embedded software in each component that controls functionality. Periodically new versions of firmware are developed to incorporate additional features and enhancements. To take advantage of design improvements, download new versions of the firmware when prompted.
When a new update is available, a green dot notification will appear. Update when prompted or click Later to install firmware from the settings menu at a later time.
Updating the Firmware
- The earphones and the device should be powered on and near each other.
- Pair the earphones to your device using Bluetooth.Note: You will be asked to allow pairing the first time you connect PLAY to a Bluetooth device.
- Connect to the ShurePlus PLAY app. Your earphones will automatically pair with the PLAY app when the Device tab is selected.
- Ensure that both earphone modules are paired with the device. If both earphone modules do not automatically connect, tap the music tab and back into the device tab to connect.
- Follow the step by step instructions in the app.
- The progress bar will display update percentage progress. A notification will appear when download is complete.
- If the update fails on the first attempt, check the list below for power and proximity requirements and repeat the process.
Tip: Follow these guidelines for the most reliable update.
- Using the headphones or device while downloading may slow the download process.
- Update requires a minimum charge of 50% on earphones and 50% on device.
- Approximate download time for headphones and earphones is up to 60 minutes.
Troubleshooting
If you only hear sound from the right side, when listening to audio (other than a telephone call):
- Pause the audio for 5-10 seconds to activate Standby mode (timing depends on which app you are using).
- Press play. The audio should be heard in both earphones for the rest of the use session.
Another option:
- Enable Environment mode with a double press.
- Disable Environment mode with double press. This resets the audio, enabling both adapters.
To avoid this situation:
- When pairing:
- Begin pairing mode with the right adapter.
- Select “Shure TW1” in the Bluetooth device list.
- Power on the left adapter.
- Already paired: power them both on at the same time
Reset paired devices list
You may find it necessary to reset the True Wireless adapters.
- Place adapters in charging case
- Press and hold both buttons, 7 seconds
The adapters reset.
Charging the adapters
- Insert the adapters into the charging case to charge.
- The LED is red while charging.
- When fully charged, the LED turns green.
- Use the supplied USB-C cable to recharge the charging case.
Warning: Before charging, ensure that the adapters and case are at room temperature, between 10 to 45°C (50 to 113°F).
Note: Use this product only with an agency approved power supply which meets local regulatory requirements (for example, UL, CSA, VDE, CCC, INMETRO).
LED indicators
Adapter LEDs
Charging case LEDs
Accessories
Furnished Accessories
Replacement Parts
Specifications
Secure Fit Adapters
Frequency
2402 to 2480 MHz
Modulation Type
GFSK, π/4DQPSK, 8DPSK
RF Output Power
-1.18 dBm EIRP (Left), 1.99 dBm EIRP (Right )
Antenna Type
Integral antenna
Antenna Gain
-4.32 dBi (Left), -2.73 dBi (Right )
Supported Codecs
Qualcomm aptX™ , SBC, AAC
Working Range
10 m
Operating Temperature
0°C to 45°C (32°F to 113°F)
Charging Temperature Range
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 35°C (14°F to 95°F)
SE215 Earphone
Transducer Type
Single Dynamic MicroDriver
Sensitivity
at 1 kHz
107 dB SPL/mW
Impedance
at 1 kHz
20 Ω
Noise Attenuation
up to 37 dB
Frequency Range
21 Hz –17.5 kHz
Input Connector
MMCX connectors
Net Weight
20.8 g (.7 oz.)
SAFETY PRECAUTIONS
Before using this product, please read and save the enclosed warnings and safety instructions.
WARNING FOR ALL EARPHONES!
Use, clean, and maintain earphones according to manufacturer’s instructions.
SAFETY PRECAUTIONS
The possible results of incorrect use are marked by one of the two symbols—”WARNING” and “CAUTION”—depending on the imminence of the danger and the severity of the damage.
WARNING
- If water or other foreign objects enter the inside of the device, fire or electric shock may result.
- Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.
- Do not use when a failure to hear your surroundings could be dangerous, such as while driving, or when biking, walking, or jogging where traffic is present and accidents could occur.
- Keep this product and its accessories out of reach of children. Handling or use by children may pose a risk of death or serious injury. Contains small parts and cords that may pose risk of choking or strangulation.
- Prior to inserting the earphone, always recheck the sleeve to make sure it is firmly attached to the nozzle to decrease the risk of sleeves detaching from the nozzle and becoming lodged in your ear. If a sleeve becomes lodged in your ear, seek professional medical assistance to remove the sleeve.
- Stop using the earphones and consult a medical professional if you experience irritation, excessive wax buildup, or other discomfort.
CAUTION
- Never disassemble or modify the device, as failures may result.
- Do not subject to extreme force and do not pull on the cable or failures may result.
- Keep the earphone dry and avoid exposure to extreme temperatures and humidity.
- If you are currently receiving ear treatment, consult your physician before using this device.
High sound pressure
Hearing damage risk
To prevent possible hearing damage, do not listen at high volume levels for long periods.
IMPORTANT SAFETY INSTRUCTIONS
- READ these instructions.
- KEEP these instructions.
- HEED all warnings.
- FOLLOW all instructions.
- DO NOT use this apparatus near water.
- CLEAN ONLY with dry cloth.
- DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- ONLY USE attachments/accessories specified by the manufacturer.
- USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- UNPLUG this apparatus during lightning storms or when unused for long periods of time.
For Products That Use Bluetooth
WARNING
- Follow instructions from manufacturer.
- Product battery may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble, heat above 140°F (60°C), or incinerate.
- Attention should be drawn to the environmental aspects of battery disposal.
- Product shall not be exposed to excessive heat such as sunshine, fire, or the like.
- Do NOT make unauthorized alterations to this product.
CAUTION
- Follow applicable laws regarding mobile phone and headphone use while driving.
- This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
- Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like
- Batteries (battery pack or batteries installed) shall not be crushed or cut
- Batteries (battery pack or batteries installed) shall not be subjected to extremely low air pressure
- Risk of fire or explosion if the battery is replaced by an incorrect type
Note: Battery replacement to be performed only by Shure authorized service personnel.
Information to the user
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the head.Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with minimum distance 0 cm between the radiator and your head. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment could be installed and operated with minimum distance 0 cm between the radiator and your body. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the head.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC performance.
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.
Certifications
Visit http://www.shure.com/earphones for the latest regulatory and compliance information.
Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC performance.
This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This Class B digital apparatus complies with Canadian ICES-003.
Hereby, Shure Incorporated declares that the radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.shure.com/europe/compliance
Authorized European representative:Shure Europe GmbHHeadquarters Europe, Middle East & AfricaDepartment: EMEA ApprovalJakob-Dieffenbacher-Str. 1275031 Eppingen, GermanyPhone: +49-7262-92 49 0Fax: +49-7262-92 49 11 4Email:
The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Shure Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Qualcomm® aptX™ is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.
Shure RMCE-TW1 True Wireless Secure Fit Adapters User Manual – Shure RMCE-TW1 True Wireless Secure Fit Adapters User Manual –
[xyz-ips snippet=”download-snippet”]