SIGMA® INFINITY
ACCESSORIES
Art.-Nr. 00481
Silicone Mount
Art.-Nr. 18552
Charger + Charging cable Micro-USB
Art.-Nr. 18553
Charging cable Micro-USB
CE INFORMATION
SIGMA-ELEKTRO GmbH hereby declares that the SIGMA® INFINITY complies with the fundamental requirements and other relevant regulations of Directive 2014/30/EU and RoHS Directive 2011/65/EU. You can find the CE declaration at: ce.sigmasport.com/infinity
MOUNTING
Do not cover the rear light!
[1]Before mounting, clean and degrease seatpost to ensure a tight fit. When attaching, make sure that the silicone strap fitting is tightened and mounted during installation so that the tail light can not self-adjust or be easily adjusted (i.e., torque required to adjust must be greater than 2 Nm after mounting).
[2]
Mounting height between 250 -1200 mm
Unifit:25-32 mm
[3]
ALIGNMENT
ALIGNMENTFinal side of the rear light parallel to the seat post at an angle of 73° to the road and perpendicular to the vehicle center axis. Do not cover the rear light!
- Reference axis parallel to the roadway
- Vehicle center axis
top
BATTERY INDICATOR
The battery needs to be charged immediately if the monitoring device/red indicator has been activated.
top
CHARGING
Please always keep the silicone plug closed after charging.
[1] Energy extraction through the Micro USB port is not possible.
bottom
Charger not incl.
During charging, the battery monitoring system lights up. If the battery is ready for use again, both indicators will go out after charging.
[2] [3]
top top
SIGMA-ELEKTRO GmbHDr.-Julius-Leber-Straße 15D-67433 Neustadt / WeinstraßeTel. +49 6321-9120-118[email protected]
185203 /3
References
[xyz-ips snippet=”download-snippet”]