Silent Sound System TX-60RF Wireless Stereo Transmitter User manual

Table of Contents

User manual

Silent Sound System TX-60RF Wireless Stereo Transmitter

About your Devices

Bluetooth ON/OFF Button
Bluetooth Indicator Light
Channel Switch Button
Channel Display LED
Microphone Indicator Light
Microphone Switch Button
Microphone Volume Control Knob
Microphone Input Interface
Audio Input Interface
Charging Status Indicator
Power ON/OFF Switch
Power Input Jack
Battery Cover
Portable Buckle

Technical Specifications

System: UHF/RF 7) Distortion: <1%
Modulation: FM 8) Frequency response:30-15,000HZ
Mode: stereo 9) Power supply of transmitter: DC 12V 1.3A
Channel: 3 channels 10) Charging Time of Battery: about 4 hours
Operation distance: >300 meters 11) Operating time of Battery: >1 OH
Channel separation: >SOdB

Using the transmitter

Transmit: Connect to the audio source at 9, slide the power ON/OFF switch 11,4 display the channel.Make sure that the transmitter matches the headset channel, then the headphone can receive music(signal) from the transmitter.
Channel switch: press button 3 to switch the channel, 4 indicate the change of adjustments of button 3
Charging: Turn off the transmitter and connect to the power supply at 12, charging indicator 10 lights. Red indicates Charge status, green indicates fully charged.
Charging when the transmitter is working: you can also charge the transmitter when it is working. Turn on the transmitter and connect to the power supply at 12,charging indicator 10 lights. It means the transmitter is charged and working at the same time.
Microphone: Plug in the external microphone at 8, press the button 6, the Indicator Light 5 is on, transmitter would launch the microphone audio signal prior, press the 6 again, the indicator light 5 is off, the transmitter will switch to the original status.
Bluetooth: When transmitter is power on,press and hold 1 about 3 seconds, indicator 2 is on , the Bluetooth opens. After power on, Bluetooth unconnected, the 2 indicator blinks blue; while connected status, the indicator 2 displays blue and keeps on; long press 1 for about 3 seconds, indicator 2 displays red then goes off, then the Bluetooth is off.
Bluetooth pairing: When transmitter is power on, press and hold 1 for about 5 seconds, indicator 2 lights red and blue flash alternately, it will be the paired mode. the indicator 2 light will always be blue when the transmitter in connected to your Bluetooth device, now the audio signal of the paired device will be sent from the transmitter to the headphone.
The Bluetooth input is prior when you have Bluetooth input and audio input 9 at thesame time. Turn off the Bluetooth,the transmitter will transmit the signal from audioinput 9.

Replace the Battery

Break the buckle from 1 CD toward the arrow direction by hand, and push the buckle from 2 toward the direction of the arrow, then you can remove the portable buckle. Use a appropriate stick to hold down toward the direction of the arrow at 3 , and push the battery cover toward the direction of the arrow at 4, then take out battery cover toward the direction of the arrow by hand. Take out the lithium battery, pull out the cable, plug in the cable of other lithium battery in the correct direction into the connection block, put lithium battery in right place, close the battery cover and portable buckle, that is to replace the battery.