Sim Pure Countertop Water Purifier User Manual

Y6 Countertop Water Purifier

Y6 Countertop Water Purification SystemModel: Y6

SimPure® Y6 Countertop Water Purification SystemOperators and Maintenance Handbook.SimPureOwners Handbook Manual Ref: MSRP-111L-03

Revision Date Description
01 01/2019 New document.
02 01/2020 Updated details.
03 06/2020 Improved manual design from customer feedback, clarified details, added further instructions, and diagrams. Updated part number & descriptions.

Please retain owner’s manual for future reference

Overview

               Getting Started

  • Introduction
  •  SimPure ® contact details
  •  Health & Safety
  •  Warnings & Cautions
  • Operating Guidelines

          Installation Guide

  •  System Contents
  •  Features
  •  Control & Display
  •  Connecting up the System
  •  Dispensing Purified Water
               Operation Guide
  •  Operation Guide
  •  Filter Replacement
  •  Troubleshooting Guide
  •  Warranty

Getting Started

IntroductionThank you for purchasing the SimPure ® Y6 Countertop Water Purification System, delivering pure water to your home or office. Please refer to the SimPure ® website for the latest product information, including operator manuals, videos, support materials, and where to purchase items.

The Y6 is a durable piece of equipment, with proper care it will last for many years. This owner’s handbook outlines the installation, operation, and maintenance requirements to sustain perfect product performance.

The Y6 features three stages of filtration  incorporated into two cartridges and a UVsystem to produce healthy,  clean water for your family

  •  Sediment removal
  • Chlorine, Taste & odor removal
  •  Reverse Osmosis (RO)
  •  Ultra Violet (UV)

Customer Service: [email protected]Toll-Free Phone: 1-866-528-4572Website: www.simpurelife.comY6 can filter out impurities and particles from your water, such as sediment, dirt, rust, chlorine, fluoride, odors,  limescale, lead, viruses, bacteria, organic matter, and heavy metals, giving your water a much better taste.

Health & SafetySimPure ®products are designed with safety in mind. However, personnel using these units must be familiar with any potential dangers. All safety information detailed in this handbook should be reviewed before installing and operating this water purification system.This product is not a toy; please keep children away from the water purifier or use under adult supervision.  Please keep packing materials out of children’s reach.The system has been designed for indoor use only. Install the System out of direct sunlight on a flat, level, dry,  and secure surface in ambient room temperature.Do not move the system without first isolating the power supply and draining the feed water tank.This unit is for use with cold municipal tap water or potable well water that has been tested safe by a certified laboratory. Never use hot water or unknown/unsafe sources of water.To protect against fire, electric shock and injury do not immerse power cords, plugs, or the appliance in water or any other liquid.In case of malfunction, remove the power plug. If any part of The system is damaged or missing, replace the items before use.

Operating GuidelinesThe following table lists the operating parameters for this product. Operating this product outside these specifications may cause system performance issues and may even lead to personal injury and void anywarranty. Please contact SimPure ® for further advice and support.

Operating Parameters
Model SimPure ®Y6
Production rate (up to)

Dependent on feed water type and temp.

4.4 fl. oz (130ml/min)(2 Gallons/hrs. (7.8 L/hr.))
Filter life expectanceDependent on feed water type and temp. 528 Gallons (2,000L)
Feed Water Type Municipal potable/tap water or Well water meeting government drinking water standards
Feed Water Temperature 5-38℃/41℉-100℉
Rated Voltage 110 Volts 60Hz AC
Rated Power 60 Watts
Dimensions 17.9 x 14.96 x 7.87 Inches(455 x 380 x 200 mm)
Weight 17.4Ib (7.9kg)
Storage Reservoirs 1.3 Gal. (5.0L) Feed water Reservoir0.4 Gal. (1.5L) Pure water Reservoir
Feed Water TDS* level < 500 ppm

* TDS = Total Dissolved Solids, which is the total weight of all solids dissolved in a given volume of water,  expressed in units of mg per unit volume of water (mg/L), also referred to as parts-per-million (ppm). With a  SimPure® TDS meter, you can easily compare the system outlet quality with your source water to help monitor the performance of the system.

Installation guide

System Contents

Your SimPure® Y6 Countertop Water Purification System was carefully assembled, packaged, and shipped complete with all the parts you should require to get the system up and running.

Unsure about something? Is there a problem?Please contact SimPure® via our service email or toll-free number.Customer Service: [email protected]Toll-Free Phone: 1-866-528-4572Website: www.simpurelife.com

System FeaturesCompact design, no plumbing required, simply plug the SimPure® Y6 Countertop Water Purification System into an electrical outlet and fill it with potable (tap) water to be purified. Push the control button to dispense.

SimPure ® products care for you,  Your family, our planet. Stay simple; Stay pure.

Control and Display Panel

FilteringIndicates purifier is filtering water.Change WaterIndicates feed tank water needs to be disregarded and refilled.UVIndicates the Ultraviolet light is operating to control virus/germs.Maintenance.This indicates when filter cartridges require changing.See Page 10 for full detailed descriptions of each function

Connecting up the SystemStep 1

Unpacking- Choose a suitable countertop, flat, secure, and out of easy reach of small children. Place the drip tray under the outlet. Allow rear space for access. Open the feed water tank cover and lift out the water tank.  The system is already pre-fitted with filter cartridges for your convenience.

Step 2Fill water tank– Fill with potable (tap)  water then carefully fit the feed water tank into the base of the purifier.  Note: When refilling the tank, always disregard remaining water before filling with fresh water. DO NOT exceed MAX level.

Step 3Turn the system on – Plug into an electrical outlet. You should hear a beep. Flushing Purifier – After powering up the system, it will automatically flush for 2 minutes. The indicator light ‘Filtering’ is on during the system flushing.

Notes:

  • If a new purifier or has not been used for a long time, please dispense 3-5 tanks of water to flush the system.
  • There’s no power switch; unplug the device should you need to turn it off.

Dispensing Purified Water

Step 1Place a cup or glass on the drip tray of the system under the dispense nozzle.

Step 2Push the control button once, and the system will dispense a cup of purified water 8.5 fl oz. (250ml) and stop automatically. To manually stop dispensing water, simply push the control button again.

Top TipWhen filling a drinking bottle or container, simply hold the control button down for 3 seconds to automatically dispense 35 fl oz (1 Liter). To manually stop dispensing, simply push the control button again.

CONGRATULATIONS!You have completed the installation!

Operational Guide

Filtering Indicator LightFlashing – The internal tank is empty; The water purifier is filtering water to refill the internal 50 fl. oz (1.5L)  pure water tank. When the indicator light is flashing, water can not be dispensed. The indicator light shall turn to Steady after about three (3) minutes

Steady – The water purifier is still filtering water, but the internal water tank has stored ≥ 12 fl. Oz (350ml) pure water.  After 7-10 minutes, the light will go out, indicating that the internal water tank has been filled with 50 fl. oz (1.5L) pure water

Change Water Indicator LightFlashing – Feed tank water too low (≤1.25L)Steady – Feed tank water of poor quality.Action Required – Remove the feed tank as the water needs to be discarded and refilled as the remaining water is concentrate. Refill with fresh potable (tap) water and refit the feed tank to the purifier.

REMOVE TANK FROM SYSTEM AND DISREGARD THE REMAINING CONCENTRATE WATER  BEFORE REFILLING WITH FRESH CLEAN WATER

Display Indicators

Maintenance Indicator LightSteady – Ultra Violet light is operating. UV will function for the first hour after starting up. One hour later, the  UV light will only operate for 7 minutes every 53 minutes to help maintain microbial control of the purified water.

Filtering Indicator LightSteady – Both filters are >90% exhausted and will need to be replaced soon.Flashing – The filters have reached the end of their life and are ≥100% exhausted.Action Required – When steady, order new filters and replace both filters together when the indicator starts flashing.

Standby modeThe system automatically enters a standby mode if not used for 1 hour. Wake the system by pushing the controlbutton.

Filter ReplacementStep 1Remove the power plug from the electrical socket to turn the system off.

Step 2Open the feed water tank cover. Wait 5 seconds.Lift out the tank, disregard water, and place it in a safe place.You should now be able to see the filter cartridges (located behind the tank).

Step 3Lift each cartridge from the bottom towards you and turn counterclockwise to remove it. Insert the new cartridge in the correct position, turn clockwise until you feel a click.

Note: You can safely dispose of the exhausted cartridges (non-toxic).

Step 4Refill the feed water tank and fit it back into the purifier and close the cover. Push and hold the control button  while plugging the system back into an electrical outlet, when you hear three (3) beeps the filters service life is reset.

Filter Replacement Details

Replacement Filter Part Number
Part No. Description Replacement Schedule (Months)
HEDPF2001_S15 PP+CTO Filter Cartridge 6
HEDPF1001_S15 RO Membrane Cartridge 6
Note: Replace both cartridges as a pair (at the same time)

Feed Water Tank Cleaning

When replacing the filters (every six months) or sooner if required, check the feed water tank strainers, check valves and feed water tank check valves are both clean and free from obstructions

Tank Strainer and Sleeve Cleaning instructionsRemove the feed water tank and empty the water, located in the bottom of the tank you will see the strainer and diversion sleeve, pull them both out.Clean the parts under running water. Once clean, refit them and fill the tank with clean water. Fit feed tank back into purifier ready for use.When strainer filter blocks, it may takes longer for the water purifier to purifyfeed water or the system does not work at all.

Top Tip:When it’s time to refill the feed water tank, why not give your plants the tank concentrate water instead of pouring it down the sink!

Customer Service: [email protected]Toll-Free Phone: 1-866-528-4572Website: www.simpurelife.com

Please replace the filters when one of the below circumstances occurs:

  1. The purified water has low water quality and tastes bad, with an obvious increase in TDS level.
  2. The water outlet flow decreases prominently. If not influenced by low room or water temperature, please inspect if the filters or membranes are blocked or replace the filter cartridges.
  3. If the filter housing color fades, or covered by dirt.
  4.  If the filter blocks, with slow water flow or no water dispensed at all.

Troubleshooting Guide

Problem

Possible Solution

1

The Water purifier will not turn on or respond when pressing the control panel dial Plug the water purifier into the electrical outlet and make sure the outlet switch is on (if applicable). The purifier should beep once when connecting to the power.
Plug the purifier into a different electrical outlet to check the outlet is working.

2

All four indicators are on at the same time There is a system fault. Unplug the unit from the electrical outlet for 5 minutes then reconnect. Contact SimPure® customer service for advice if the problem persists.

3

The purifier does not make purified water Feed Water tank cover open, close cover
The feed Water tank is not installed correctly, check it is located onto the purifier base correctly
Feed Water tank level too low, drain concentrate and refill tank with freshwater
The internal pure water storage tank (non-feed water tank) is empty, and the filtering indicator is on. Wait 1-2 mins before dispensing water, when the indicator light is  off, pure water tank full.

 4

The purifier doesn’t operate or respond to the control button, or lights don’t illuminate. System locked or stuck. Unplug the unit from the electrical outlet for 5 minutes then reconnect.
Hardware damage. Contact SimPure® customer service for advice

5

Water taste is poor or has a strange smell If new purifier, then dispense up to 3-5 tanks of water to flush system.
If the purifier has not been used for a long time or the filters are exhausted, replace both filters and dispense 3-5 tanks of water to flush system.

6

Water Purifier makes excessive noise during operation Note: The purifier does make noise when processing water; this is normal. The feed tank water level is very low. Empty the feed water tank and refill with fresh potable (tap) water
Water quality is poor; filters have blocked early (before replacement schedule). Replace both filters.

7

System Leaking The drip tray is full. Remove and empty it before putting it back.
Check Valve/Seal Valve blocked by foreign objects. Remove the Check Valve/Seal Valve or contact SimPure® customer service.
If the leakage is from the inside, contact SimPure® customer service.

Warranty

SimPure® warrants to the customer that its residential countertop water purification systems will be free from defects in material and workmanship under normal use and service for a period of 1 year. We will replace or repair any part of the SimPure® purification systems that we find to be defective in operation due to faulty materials or workmanship within one year since the date of the original purchase. Used replaceable filter cartridges and membranes are excluded.General ConditionsSimPure® obligation to the customer under these warranties shall be limited, at its option, to replacement or repair of items covered by these warranties. Prior to return or repair of covered items, the customer must obtain a return goods authorization number from SimPure® and, at SimPure® option, return the item with freight prepaid by the customer.Damage to any part of this system because of misuse, misapplication, negligence, alteration, accident, installation, or operation contrary to our instructions, incompatibility with accessories not installed by SimPure® , or damage caused by freezing, flood, fire, or Acts of God are not covered by this warranty. In all such cases, regular charges will apply. This limited warranty does not include service to diagnose a claimed malfunction in this unit. This warranty is void if the claimer is not the original purchaser of the unit or if the unit is not operated with certified safe potable municipal or well water. We assume no warranty liability in connection with this system other than that specified herein. This warranty is in lieu, of all other warranties, expressed or implied, including warranties of fitness for a particular purpose. SimPure® liability hereunder shall not exceed the cost of the product. Under no circumstances will SimPure®  be liable for any incidental or consequential damages or for any other loss,  damage or expense of any kind, including loss of use, arising in connection with the installation or use or inability to use the covered items. These warranties are governed by the laws of the state of Washington, USA, and may change at any time without notice.

Our Products & Services

Consumables

A full selection of consumable items to maintain your SimPure countertop water purifier system well into the future are available from SimPure® online or through your local Distributor.

Tools & Accessories

SimPure Test equipment helps monitor the performance of your SimPure® water system, making sure it’s performing as expected.Test your water today!

Products

SimPure® products help to improve your life. Air Purifiers to improve the air you breathe for your home and car. Showerhead filters to improve your water quality and care for your skin and hair. BPA Free Portable water bottle with filter.

Notes:

Who we are

  •  SimPure® is a purification brand from the United States, specializing in creating a better, healthier you through improved filtration and purification technologies.
  • Back to nature with clean water and fresh air. SimPure promotes the philosophy of a ‘minimalist lifestyle’ that is committed to creating a simple, clean, and comfortable environment.
  • SimPure® designs products to be both smart, easy to operate, and practical in appearance and functionality.
  •  SimPure® products care for you, your family, our planet.Stay simple; Stay pure.

Contact Us

If you require technical assistance, please contact our friendly professional support engineers, who will be pleased to assist you.3320 W Valley HWY North Ste D108Auburn WA 98001Phone: 1-866-528-4572Customer Service: [email protected]Website: www.simpurelife.com

SimPure® Y6 Countertop Water Purification SystemOperators and Maintenance Handbook.SimPureOwners Handbook Manual Ref: MSRP-111L-03

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by