SimPure Y5 Insta-Hot Countertop Water Purification System Installation Guide
SimPure® Y5 Insta-Hot Countertop Water Purification System Operators and Maintenance Handbook.
Owners Handbook Manual Ref: MSRP-110L-03
Overview
Getting Started
- Introduction
- SimPure® contact details
- Health & Safety
- Warnings & Cautions
- Operating Guidelines
Installation Guide
- System Contents
- Features
- Control & Display
- Connecting up the
- System System Flushing
- Dispensing Purified Water
Operation Guide
- Operation Guide
- Mode Selection
- Filter Replacement
- Troubleshooting Guide
- Warranty
Getting Started
Introduction
Thank you for purchasing the SimPure® Y5 Insta-Hot Countertop Water Purification System, delivering pure water, hot or ambient, to your home or office. Please refer to the SimPure® website for the latest product information, including operator manuals, videos, support materials, and where to purchase items.
The Y5 is a durable piece of equipment, with proper care it will last for many years. This owner’s handbook outlines the installation, operation, and maintenance requirements to sustain perfect product performance.
The Y5 features four stages of filtration incorporated into three cartridges to produce healthy, clean water for your family
- Sediment removal
- Chlorine removal
- Reverse Osmosis (RO)
- Taste & odor filtration
Customer Service: [email protected]Toll-Free Phone: 1-866-528-4572Website: www.simpurelife.com
Y5 can filter out impurities and particles from your water, such as sediment, dirt, rust, chlorine, fluoride, odors, limescale, lead, viruses, bacteria, organic matter, and heavy metals, giving the water a much better taste.
Health & Safety
SimPure® products are designed with safety in mind. However, personnel using these units must be familiar with any potential dangers. All safety information detailed in this handbook should be reviewed before installing and operating this water purification system.
Cation Hot water! This product is not a toy; please keep children away from the water purifier or use under adult supervision. Please keep packing materials out of children’s reach.
The system has been designed for indoor use only. Install the System out of direct sunlight on a flat, level, dry, and secure surface in ambient room temperature.
Do not move the system without first isolating the power supply and draining the feed water tank.
This unit is for use with cold municipal tap water or potable well water that has been tested safe by a certified laboratory. Never use hot water or unknown/unsafe sources of water.
To protect against fire, electric shock and injury do not immerse power cords, plugs, or the appliance in water or any otherliquid.
In case of malfunction, remove the power plug. If any part of the System is damaged or missing, replace the items before use.
Warnings! and Cautions! are provided; Failing to observe the instructions could result in damage to the equipment, associated parts, surroundings, or personal injury.
Operating Guidelines
The following table lists the operating parameters for this product. Operating this product outside these specifications may cause system performance issues and may even lead to personal injury and void any warranty. Please contact SimPure® for further advice and support.
* TDS = Total Dissolved Solids, which is the total weight of all solids dissolved in a given volume of water, expressed in units of mg per unit volume of water (mg/L), also referred to as parts-per-million (ppm). With a SimPure® TDS meter, you can easily compare the system outlet quality with your source water to help monitor the performance of the system.
Installation guide
System Contents
Your SimPure® Y5 Insta-Hot Countertop Water Purification System was carefully assembled, packaged, and shipped complete with all the parts you should require to get the system up and running.Drip tray
Unsure about something? Is there a problem? Please contact SimPure® via our service email or toll-free number.
Customer Service: [email protected]Toll-Free Phone: 1-866-528-4572Website: www.simpurelife.com
System Features
Compact design, no plumbing required, simply plug the SimPure® Y5 Insta-Hot Countertop Water Purification System into an electrical outlet and fill with potable (tap) water to be purified, select room temperature or hot water dispensing.
THIS DEVICE CAN PRODUCE VERY HOT WATER AND POSES A RISK OF SCALDING; PLEASE KEEP CHILDREN SAFE AND AWAY FROM DANGER!
Control and Display Panel
CF RO CBIndicates when the user needs to replace the filters.
FilteringIndicates purifier is filtering water.
Change WaterIndicates feed tank water needs to be Discarded and refilled.
Maintenance.Indicates maintenance is required.
Reset.Indicates the filters are exhausted (also used to reset filter life).
Tea / Coffee /Room Temp / Baby FormulaIndicates the purified water dispense temperature selected.
PowerIndicators the system is on and ready to purify water.See Page 11-12 for full detailed descriptions of each function
Connecting up the System
Step 1Unpacking- Choose a suitable countertop, flat, secure, and out of easy reach of small children. Allow space to access the removal of the rear feed water tank. Place the drip tray under the outlet. The system is pre-fitted with the filter cartridges for your convenience.
Step 2
Fill water tank- Open the cover of the feed water tank located at the back of the unit, Lift the tank out from the rear of the system. Fill with potable (tap) water, replace the cover, and carefully fit the feed water tank into the base.
Note: When refilling the tank, always Discard remaining water before refilling. DO NOT exceed the “MAX” level.
Step 3
Turn the system on – Plug into an electrical outlet. The blue power indicator will light on. The system enters a standby mode if not used for 10 minutes. Note: There is no power switch; Unplug the device should you need to turn it off. Before use, all parts must be adequately flushed, follow instructions, System Flushing (Page 9).
DO NOT CONSUME WATER UNTIL FLUSHING COMPLETE
System Flushing
Installing New FiltersIf you are commissioning the system for the first time or have just replaced the filter cartridges, please refill the feed tank and then Discard all the water inside. Repeat this process for 5-10 times (6.6-13 gallons of water) to ensure the system is adequately flushed before use.
Infrequent System UseTo ensure the freshness of the drinking water, flush the system once using the following steps if the feed tank water has not been emptied/refilled for more than Three days.
Dispensing Purified Water
CONGRATULATIONS!You have completed the installation!
THIS DEVICE CAN PRODUCE VERY HOT WATER WITH A RISK OF SCALDING; KEEP CHILDREN AWAY FROM DANGER!
Operational Guide
Display Indicators
CF, RO and CB Indicators LightsThe three indicators lights remind the user when to replace the filters;Flashing – The filter is >90% exhausted. Steady – The filter has reached the end of its life 100% exhausted. At this time, there will be three beeps when dispensing water.CF = 2-in-1 Composite Filter(Sediment PP Membrane & Pre-Carbon Block )RO = 0.0001 Micron RO (Reverse Osmosis)CB = Activated Carbon Post-filter
Filtering Indicator LightFlashing – The internal tank is empty; The water purifier is filtering water to refill the internal 50 fl. oz. (1.5L) pure water tank. When the indicator light is flashing, water can not be dispensed. The indicator light shall turn to Steady after about three (3) minutes.Steady – The purifier is still filtering water, but the internal pure water storage has stored 11.83 fl. oz. (350ml) pure water. Pure water can be dispensed during this stage. After 7-10 minutes, the light will go out, indicating that the internal water tank has been filled with 50 fl. oz. (1.5L) pure water.
Tea, Coffee, Room Temp., Baby Formula Light
Indicates the pure water dispense temperature selected. Turn the dial to the desired water temperature; the corresponding indicator will display the selected temperature mode.
Change Water Indicator Light
Flashing Feed tank water too low (1.25L) Steady Feed tank water of poor quality. Action Required Remove The feed tank as the water needs to be discarded and refilled with fresh potable (tap) water and reattached (remaining water is concentrate).
REMOVE TANK FROM SYSTEMDiscard TANK CONCENTRATE BEFOREREFILLING WITH CLEAN WATER.
Maintenance Indicator LightFlashing with Filtering Light - The filters may not be installed correctly.Flashing with Room Temperature Light - Temperature sensor malfunctionsAction Required - If flashing, please check if the filters are installed correctly. Contact SimPure® customer service for advice if the problem persists. )
Reset Button and Indicator Light
Indicates when a filter’s life is exhausted. Replace the corresponding filters as indicated by CF, RO, or CB indicator light. Press the reset button and hold for 3 seconds until two beeps are heard to enter Reset Mode. Power Press again to select the desired filter, and then hold for 3 seconds until a beep is heard; the chosen filter is reset.
Filter Replacement
Replacement Filter Part Number
Note: Please contact our customer services for purchase options.
Important:After replacing the filter cartridges follow the System Flushing instructions (page 9) to rinse the purifier before consuming any water.
Boiling Point Adjustment
When the system is in Standby Mode, you can follow the steps below to adjust the `tea’ boiling point from 190 to 212 (88 – 100 ± 3) Please note: Higher elevations will decrease the boiling point of water. The boiling point of the device must not exceed the local boiling point, otherwise, hot water will splash. Once restart the system, it will remember its previous boiling point.
Standby (Sleep) modeIf there’s no operation within 10 minutes, the purifier will enter standby (sleep) mode. It can be awakened by turning or pressing the dial. However, if the dial is pressed, the system will automatically dispense Room Temperature water.
Top Tip:When it’s time to refill the feed water tank, why not give your plants the remaining tank concentrate water instead of pouring it down the sink!
Customer Service: [email protected]Toll-Free Phone: 1-866-528-4572Website: www.simpurelife.com
Troubleshooting Guide
Warranty
SimPure® warrants to the customer that its residential countertop water purification systems will be free from defects in material and workmanship under normal use and service for a period of 1 year. We will replace or repair any part of the SimPure® purification systems that we find to be defective in operation due to faulty materials or workmanship within one year since the date of the original purchase. Used replaceable filter cartridges and membranes are excluded.
General ConditionsSimPure® obligation to the customer under these warranties shall be limited, at its option, to replacement or repair of items covered by these warranties. Prior to return or repair of covered items, the customer must obtain a return goods authorization number from SimPure® and, at SimPure® option, return the item with freight prepaid by the customer.
Damage to any part of this system because of misuse, misapplication, negligence, alteration, accident, installation, or operation contrary to our instructions, incompatibility with accessories not installed by SimPure®, or damage caused by freezing, flood, fire, or Acts of God are not covered by this warranty. In all such cases, regular charges will apply. This limited warranty does not include service to diagnose a claimed malfunction in this unit. This warranty is void if the claimer is not the original purchaser of the unit or if the unit is not operated with certified safe potable municipal or well water. We assume no warranty liability in connection with this system other than that specified herein. This warranty is in lieu of all other warranties, expressed or implied, including warranties of fitness for a particular purpose. SimPure® liability hereunder shall not exceed the cost of the product. Under no circumstances will SimPure® be liable for any incidental or consequential damages or for any other loss, damage or expense of any kind, including loss of use, arising in connection with the installation or use or inability to use the covered items. These warranties are governed by the laws of the state of Washington, USA, and may change at any time without notice.
Our Products & Services
Consumables
A full selection of consumable items to maintain your SimPure® countertop water purifier system well into the future are available from SimPure® online or through your local Distributor.
Tools & Accessories
SimPure® Test equipment helps monitor the performance of your SimPure® water system, making sure it’s performing as expected.Test your water today!
Products
SimPure® products help to improve your life.Air Purifiers to improve the air you breathe for your home and car.Showerhead filters to improve your water quality and care for your skin and hair.BPA Free Portable water bottle with filter.
Notes:
Who we are
- SimPure® is a purification brand from the United States, specializing in creating a better, healthier you through improved filtration and purification technologies.
- Back to nature with clean water and fresh air. SimPure® promotes the philosophy of a `minimalist lifestyle’ that is committed to creating a simple, clean, and comfortable environment.
- SimPure® designs products to be both smart, easy to operate, and practical in appearance and functionality.
- SimPure® products care for you, your family, our planet. Stay simple; Stay pure.
Contact UsIf you require technical assistance, please contact our friendly professional support engineers, who will be pleased to assist you.
3320 W Valley HWY North Ste D108 Auburn WA 98001
Phone: 1-866-528-4572Customer Service: [email protected]Website: www.simpurelife.com
report this ad
References
[xyz-ips snippet=”download-snippet”]