Skmei 0966 Watch Instruction & Manual

Skmei 0966 Watch Instruction & Manual

Skmei watch direct saleswww.skmei-watch.com

Operation Manual

A. Features

  • In normal mode: Display hours, minutes and seconds, week.
  • 29 Time Zone and Daylight-saving Time function
  • 4 set the Alarm function, 1 Snooze function, Chime function
  • 60 minutes countdown function
  • 1/90 Stopwatch function
  • LED back light function

B. Operational Manual

In normal mode ,Press A key for LED light ON.Press D key to display Month and Date. Press B key to convertthe MODE as following:

In Normal Time Model Hold C key for 2 seconds to enter into time setting mode, “seconds” flashing, press theB key to to choose the object as following:

  • Press D key, plus 1 for the object, if hold D key will increase rapidly.
  • Press A key, reduce 1 for the object, hold A key will reduce rapidly.
  • When set the object of “Time Zone”, press D key to upward the Time Zone ,press A downward Time Zone
  • When set the object of “Daylight-saving Time”, press D key to OFF/ON, if display “DST” means ON, otherwise means OFF.
  • When set 12/24H format, press the D key to convert it
  • When set the object of “seconds”, if the seconds within 0 ~ 29 seconds, press the D key the secondswill back to 00; if within 30~59 seconds, press D key back to 00, at the same time the minutes will plus 1 minutes.
  • When set “year”, “month”, “day”, press A/D key to adjust, and the week will adjust automatically according to date.
  • When set the “LED” lighting time , the icon of ”  ”  flashing, press D convert to ” “.If the icon been setted to ” “, the LED light ON for 1 seconds,If the icon been setted to” “, the LED light ON for 2 seconds

World Time Mode

In Word Time Mode:

  • Press “C” key for 2 seconds to ON/OFF the Daylight-saving Time, if ON will show icon of “DST” ,otherwise will disappear.
  • Press D key to choose time zone, hold D key to choose time zone quickly.

Countdown Mode

  • The max countdown range is 60 minutes, the default countdown range is 5 minutes.
  • Press D key to start/pause the countdown.
  • When the countdown is processing, press D key to pause,then C key to return to the original setvalue.

Countdown time Setting

  • In countdown mode, press the C key for 2 seconds the Hour flashing, enter into countdown timesetting state. Press the B key to choose the object: Hours→ Minutes→ Seconds
  • Press D key, plus 1 for the object, if hold D key will increase rapidly.
  • Press A key, reduce 1 for the object, hold A key will reduce rapidly.
  • Press B key enter into circulation countdown setting state, press D key to convert.

means when the countdown over, will automatically back to original set value. means when countdown over will automatically circulation countdown. means ON/OFF warning tone. If ON, when the countdown less than 30 minutes, the warning tone will prompt .

  • Press C key to exit

Stopwatch Mode

  • In stopwatch mode, press D key once to start, press D key again to suspend.When suspend, press C key back to 0:00:00.
  • In stopwatch mode, press D key to start, press C key enter into split function.press C key again to get the record and the stop watch still processing in the back ground. Press D key to suspend.press C key back to 0:00:00

Alarm Mode

In alarm mode, press D key to choose “SIG( Hourly chime),” “AL1 ~ AL4” (four sets alarm) and “SNZ” (snoozefunction) :

  • Press C key to ON/OFF Alarm function, if the icon “ALM” show means ON, otherwise means OFF
  • Hold C key for 2 seconds the “Hours” flashing, press B key to choose hours ↔ minutes
  • Press D key, plus 1 for the object, if hold D key will increase rapidly.
  • Press A key, reduce 1 for the object, hold A key will reduce rapidly.
  • In AL1 ~ AL4, if the time is alarm time, the alarm will chime for 20s, press any to to stop chime.
  • In SNZ (snooze function) if the time is alarm time, the alarm will chime for 20s, then every 5 minutes will chime 20s, till the alarm chime 7 times then stop.
  • If SIG (Hourly chime) ON, then icon of ” ” will display and the alarm will chime every hour .otherwise have no this icon .
  • Press C key to exit .

Adjust the hands

  • In Hands adjust mode, hold C key until the time flashing enter into Hands setting mode, hold D to adjust the hands time.
  • press C key to exit

Remark: after replace the battery, LCD will display12:00: 00 and flashing, means automatically enter intothe hands adjust mode.

Downloads

Skmei 0966 Watch Instruction & Manual –

Skmei 0966 Watch Instruction & Manual –

 

[xyz-ips snippet=”download-snippet”]


Posted

in

by

Tags: