Skmei 1081, 1063 Watch Instruction & Manual

Skmei 1081, 1063 Watch Instruction & Manual

Skmei watch direct saleswww.skmei-watch.com

A. Features：

• Display Month ,Day Week Hour ,Minute ,Second ,
• Display Two area time,
• Daily Alarm and Chime hourly ,1/100 second Chronograph with split functions
• EL backlight

B. Operational Manual

LIGHT: In any Mode Press LIGHT Key for LED light ON：

SET: In normal mode,Press SET key 2s to enter into set mode,”second”,”hour” and “minute” will Flash one by one .

MODE：{In set mode, Press MODE to adjust the function(+)(-) }

In normal mode, Press MODE key to convert display the function as following:

The time Setting:

In Normal Mode, press SET key 2s enter to set mode, the “Seconds” flashing, Press MODE(D) Key to zero.

• Press SET the “Hours” flashing. Press MODE to adjust “Hours” (Pay attention: A/P/H,”A” means “AM”, “P” means “PM”,“)
• Press SET the “Minutes” flashing. Press MODE to adjust “Minutes”.
• Press SET the 12/24H format flashing ,Press MODE to adjust Hours format 12H /24H.
• Press SET to exit.

Date Setting:

In Normal Mode, press MODE enter to date function display :

• Press SET key 2s “Month” flashing ,press MODE to adjust “Month”
• Press SET key the “Date” flashing ,press MODE to adjust “Date”
• Press SET key the “ Week”” flashing ,press MODE to adjust “Week”
• Press SET key exit.

Alarm & Chime ON/OFF Setting:

Alarm Setting:

In normal mode press MODE key twice to enter alarm mode ,

• Press SET key2s” Hour” flashing, Press MODE key to adjust hour. Pay attention to AM/PM
• Press SET key “Minute” flashing, Press MODE key to adjust minutes.
• Press SET key to exit.

Alarm & Chime ON/OFF

• In normal mode press MODE (D)key twice to enter alarm mode , press SET key 2S enter to set mode,press SET key three times ,The “ “and “ ”flashing ,press MODE key to ON/OFF the “ALM”/“CHI” function , Press B key to exit.

The second area time setting:

In Normal Mode, press MODE three times enter to the second area time display (you can see “DL” function word) :

• Press SET key 2s” Hour” flashing, Press MODE key to adjust hour. Pay attention to AM/PM
• Press SET key “Minute” flashing, Press MODE key to adjust minutes.
• Press SET key the 12/24H format flashing ,Press MODE key to adjust Hours format 12H /24H.
• Press SET key exit.

Chronograph functions

In normal mode: press MODE key four times key enter Chronograph mode, the “ST” function word comes out.

• Press SET key to Start running ;When running, If press SET key again will stop running, If press SET keygo on running ,,Press SET key again , will running again. Press SET key 2s to zero. Press MODE key exit.

Downloads

Skmei 1081, 1063 Watch Instruction & Manual –

Skmei 1081, 1063 Watch Instruction & Manual –