SKMEI 1583 Operation Manual
FEATURES
- Digits LCD Display Display Hour ,Minute ,Second ,Month ,Day, Year and Week
- Dual time display (display both local and second time);
- 12/24hr display;
- Daily Alarm and Chime hourly
- 1/100 second Chronograph with split functions
- Countdown function, to:23:59:59;
- Dual time;
- 3 second EL backlight;
- Year setting; (range: 2000~2049)
FUNCTION
Operation Manual
- At any state ,press A key EL backlight for 3s.
- Press B key function successively:time mode→Daily Alarm→Dual time→Timer→Chronograph;
TIME/DATE SETTING
In the time mode, press and hold C key to time setting state and “Second” flashing
- Press B key to select Settings: second→time→minutes→year→month→day; (note: in any mode of this interface,
- press A key to convert 12/24 hours)
- Press D key to adjust the setting items, press and hold D key to rapidly adjust;
- After setting, press C key exit setting mode.
Daily Alarm Mode
- Press A key to start: daily alarm hourly chime daily alarm and hourly chime;
- Press C key to enter alarm setting mode, “hour” flashing;
- Press B key to select the setting items: hour→minute→month→day;
- Press D key to adjust the setting items, press and hold D key to rapidly adjust;
- After setting, press C key exit setting mode.
- Note: default to daily alarm!When set month – day, it means the designated date time ring!
The alarm ring
- When Alarm is ON, the alarm prompt lasts for 10 seconds. Press any key to stop the alarm prompt.
Dual time function and setting
- press C key to enter the second time setting “hour” flashing;
- Press B key to select setting items :hour→minute;
- Press D key to adjust the setting items, press and hold D key to rapidly adjust;
- After setting, press C key to exit setting mode.
Timer Mode
The measurement range of this table is 23 hours, 59 minutes and 59 seconds
- Press C key to enter the setting mode, “hour” flashing;
- Press B key to select Settings: hour→minute → second; (in the setting interface, press A key to turn on or off AUTO AUTO loop)
- When the AUTO cycle function is turned on, the mode will be set before the automatic cycle after the timer is completed. Enter the timer setting item and press A to close the AUTO; (Press D in timer mode to pause timer and then press C to enter the setting item)
- Press D key to adjust the setting items, press and hold D key to rapidly adjust;
- After setting, press C key to exit setting mode;
- Timer alarm sounds for about 10 seconds ,press any key to stop the alarm;
- When stop the alarm, display the timer setting .
- When the timer is stop midway, press A key to return to the setting.
Chronograph
- Press D key to start dual time mode, When stop, press C key to zero.
- During the dual timer, press A key to turn on SPL function, display “SPL” on the screen.press A key to return to the dual timer again.
- When reach the maximum (23 hours, 59 minutes, 59.99 seconds), continue to restart the stopwatch timing from 0;
- Note: ABCD four key to hold down at the same time, will restore factory settings! As shown in the following figure:
Skmei 1583 Sport Waterproof Watch Operation Manual – Skmei 1583 Sport Waterproof Watch Operation Manual –
[xyz-ips snippet=”download-snippet”]