USER MANUAL
Ringer / KeyRingerSkullcandy 2XL
Diagram
Power On – 1Press and hold the MFB until the LED flashes blue and the ascending tone plays.
Power Off – 1Press and hold the MFB until the descending tone plays and the blue light turns off.
Pairing – 1Powered off, hold the MFB until the LED alternates flashing Blue and Red. KeyRinger will automatically pair to the last paired device when powered on.
Un-pairing – 1 – 2Press and hold the MFB and the volume up button until the device powers off. The paired list will now be cleared.
Pause – 1Press the MFB once to pause and once again to play.
Volume Up – 2Press volume up button once. A tone will sound at max volume.
Volume Down – 3Press volume down button once. A tone will sound at minimum volume.
Next Track – 2Hold down the volume up button.
Previous Track – 3Hold down the volume down button.
Charging : When connected to the USB cable and power source, the LED will be Red while charging and turn off once fully charged.
Low Battery : There will be a tone warning every 30 seconds.
- Main Function Button
- Volume Up Button
- Volume Down Button
- LED
- USB Charging Port
- AUX
Power On – Press and hold the MFB until the LED flashes blue and the ascending tone plays.
Power Off – Press and hold the MFB until the descending tone plays and the blue light turns off.
Pairing –Powered off, hold the MFB until the LED alternates flashing Blue and Red. KeyRinger will automatically pair to the last paired device when powered on.
Un-pairing – Press and hold the MFB and the volume up button until the device powers off. The paired list will now be cleared.
Pause – Press the MFB once to pause and once again to play.
Volume Up – Press volume up button once. A tone will sound at max volume.
Volume Down – Press volume down button once. A tone will sound at minimum volume.
Next Track – Hold down the volume up button.
Previous Track – Hold down the volume down button.
Charging – When connected to the USB cable and power source, the LED will be Red while charging and turn off once fully charged.
Low Battery – There will be a tone warning every 30 seconds.
FCC COMPLIANCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:1) This device may not cause harmful interference.2) This device must accept interference, including interference that may cause undesired operation
MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THEUSER’S AUTHORITY TO OPERATE THE EQUIPMENT UNDER FCC RULES.
This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits provide reasonable protection against radio and TV interference in a residential area. However, your equipment might cause TV or radio interference even when it is operating properly. To eliminate interference you can try one or more of the following corrective measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the radio or TV.
- Use outlets on different electrical circuits for the equipment and the radio or TV.
- Consult your dealer or an experienced radio /television technician if the problem still exists.
Modifying or tampering with your system’s internal components can cause a malfunction and might invalidate the and void your FCC authorization to operate it.
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
CONTAINS Li-ion BATTERY.BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY.
North AmericaSkullcandy, Inc., 1441 W.Ute Blvd. Ste. 250Park City, UT 84098, U.S.A.www.skullcandy.com
CanadaSuite 2300 Bentall 5550 Burrard St.VancouverBC V6c 2B5, Canada
Skullcandy Europe BVZentrale Kontakstelle:Luna ArenAHerikerbergweg 2381101 CM AmsterdamNiederlandeeu.skullcandy.com
Questions about your Manual? Post in the comments!
[xyz-ips snippet=”download-snippet”]