Instruction Manual
Wireless security cameraCMS-30101
PARTS DESCRIPTION
Camera
| 1. Antenna | 3. Lens | 5. Microphone |
| 2. LED light | 4. Day/night sensor | 6. Speaker |
Frequency: 2.4GHzMaximum transmission power: 17.63dBm
SETTING UP YOUR DEVICE
The monitor can pair up to 4 cameras.
- Turn the camera on by connecting it to the mains supply.
- Wait for 30 seconds.
- You will now hear: “Start configuration mode”.NOTE: if you don’t hear the voice, press the re-set button on the camera for 6 seconds until you hear “Restore factory setting”.
- On the monitor from the main menu: Select “Add Camera”.
- Select “Add Camera”.
- On the camera: If the above steps are done correctly, you will hear:– “Wireless settings, please wait”– “Wireless connection successful”
- On the monitor: Wait for the pairing to complete.
EXTENDED MANUAL
The extended manual is available at the following internet address: www.smartwares.eu and search for Wireless Security Camera Set Outdoor CMS-30100
DECLARATION OF CONFORMITY
Hereby, Smartwares Europe declares that the radio equipment type CMS-30101 is in compliance with Directive 2014/53/EU The full text of the EU declaration of conformity is available at the following internet address: www.smartwares.eu/doc
Wireless technology: RFOperating frequency: 2,4 GHzMax. radio-frequency power: 19.67 dBm
For more detailed instruction, please visit: service.smartwares.eu
SUSTOMER SERVICE
smartwares® Europe
Jules Verneweg 875015 BH Tilburg The Netherlandsservice.smartwares.eu
UK: +44 (0) 345 230 1231
References
[xyz-ips snippet=”download-snippet”]