Smittybilt Jerry Can Holder Installation Instruction Manual

Smittybilt Jerry Can Holder

This is a Universal Jerry Can Bracket. It can be mounted in a variety of places. (Truck beds, trailers, bumpers, roof racks, ect..) Due to this no hardware is included.

Step 1:

Determine the location you want to mount your bracket. Make sure bracket is flush against mounting surface. (Fig A)

Step 2:

Use the holes in the bracket as a guide to mark the holes. (Fig B)

Step 3: 

Depending on the type of hardware you plan to use (Self Tapping bolts, Bolts with Nuts, ect) set the bracket to the side and drill the proper size mounting holes needed. You can purchase hardware at any home improvement store.

Step 4:

Install top strap bracket over can by connecting the hook side to the buckle. (Fig A) and the slot over the lock tab. ( Fig B) (Lock not included)

Step 5:

Installation is now complete. (Fig E)

Note: Make sure to always use top strap when transporting Jerry can. It is also recommended to secure with a lock

Limited Warranties

Smittybilt’s products are covered under the following limited warranties only. Note that the duration of the limited warranty differs according to the material and finish of the product purchased. Subject to the duration and conditions of the limited warranty stated below, Smittybilt warrants to the original retail purchaser that its products are free from defects in material and workmanship. All other warranties and representations express or implied, are hereby disclaimed, including fitness for merchantability and buyer’s intended use or purpose. All parts are sold “AS IS” except for the limited warranties granted herein. Buyer assumes all risks as to the selection, suitability and performance of all goods and products selected. This limited warranty does not cover damage or impairment in any part due to misuse, improper installation, accident or contact with on-road or off-road hazards, product modification, improper or inadequate cleaning and/or maintenance. Smittybilt is not responsible for items damaged during shipping. This warranty is not transferable from the original buyer. For the original Buyer to be eligible for the limited warranty coverage, the Buyer must provide proof of purchase. Smittybilt strongly recommends returning the warranty registration card.

Customer’s remedy hereunder shall be limited only to repair or replacement (at Smittybilt’s option) of any defective part(s) returned to Smittybilt at customer’s expense. The determination of whether or not a returned part is defective or subject to coverage under the limited warranties stated herein shall be made at Smittybilt’s sole discretion.

To assure product quality, Smittybilt reserves the right to change product design, material, specification and finishes without prior notice to customers. This limited warranty gives you specific legal rights and you may also have other rights, which may vary from state to state. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply as to you. Also, some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. Smittybilt reserves the right to discontinue product lines and substitute products, or provide other remedies than those listed in this limited warranty for those discontinued products.

Warning

Rollover and other types of vehicle accidents may result in serious injury or death to you, your passengers and others sharing the road. Smittybilt accessories are decorative and are not intended to reduce or avoid injury or damage in the event of an accident. The weight and location of Smittybilt accessories may affect your vehicles’ handling, stability and performance, creating an increased risk of accident or rollover. Before installing any accessory, check state laws and assure that the accessory will not obscure any lights or interfere with proper operation on your vehicle’s safety equipment. Consult your owner’s manual and the Smittybilt instructions, or additional safety information. Smittybilt products, nor the warnings contained herein, are not a substitute for your safe driving. Don’t drink and drive, always use seat belts and don’t drive faster than conditions permit.

Technical Support

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt Jerry Can Holder Installation Instruction Manual – Smittybilt Jerry Can Holder Installation Instruction Manual –