SOCKET Bluetooth wireless technology Cordless Barcode Scanner User Guide

SOCKETSCAN® 800 SERIES USER GUIDEATTACHABLEsocketmobile.com

Bluetooth® wireless technologyCordless Barcode Scannerwww.socketmobile.com

Package Contents

Thank you for choosing Socket Mobile! Let’s get started!

© 2021 Socket Mobile, Inc. All rights reserved. Socket®, the Socket Mobile logo, SocketScan®, DuraScan®, Battery Friendly® are registered trademarks or trademarks of Socket Mobile, Inc. Microsoft® is a registered trademark of Microsoft Corporation in the United States and other countries. Apple®, iPad®, iPad Mini®, iPhone®, iPod Touch®, and Mac iOS® have registered trademarks of Apple, Inc., registered in the U.S. and other countries. The Bluetooth® Technology word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Socket Mobile, Inc. is under license. Other trademarks and trade names are those of their respective owners.

PRODUCT INFORMATION

Socket Mobile’s barcodes scanners can be wiped clean with a cloth dampened with isopropyl alcohol or water. Or, the barcode scanners can be wiped clean with a Sani-Cloth.Warning: DO NOT IMMERSE IN WATER (scanner’s mechanics could be damaged)DO NOT USE BLEACH FOR CLEANING (scanner’s material property may be affected)*Also used to display the on-screen keyboard in Basic Mode (iOS only).

CHARGE THE BATTERY

 

  1.  Insert charging cable into an AC charging adapter (not included – most smartphones and tablets come with AC Adapters that look something like this.)
  2.  Insert Micro USB into the 800 Series USB port.
  3.  The 800 Series will beep twice indicating adequate power is being supplied to the unit.

Note: The SocketScan comes with a pre-installed rechargeable Lithium-Ion battery, the initial full charging of the battery can take up to 8 hours.Power OnPress and hold down the small power button on the side until the SocketScan beeps twice (low-high tone).

OPTIONAL CHARGING ACCESSORIES

DuraCaseSocket Mobile DuraCaseTM combines and safeguards both the 800 Series and mobile device as a one-handed scanning solution that simultaneously charges both devices.Available for Apple® iPod touch®, Samsung J3/J5* and Samsung S7*.Watch our video on how to set up your purchase.

Due to varying countries’ outlets, the DuraCase 6 Multi-Bay Charger power cords are NOT included inthe package.

*On Samsung mobile devices, be sure to disable Fast Charge. 6

SCANNING BARCODESAfter connecting the SocketScan to your device, open an application. Place the cursor where you want to enter the scanned data.

  1. Hold the SocketScan a few inches from the barcode.
  2. Aim, press, and hold the trigger button.

By default, the SocketScan will beep, vibrate, and the side LED will flash green to confirm a successful scan.

BLUETOOTH CONNECTION MODES

Connect your scanner using one of the following Bluetooth connection modes:Bluetooth Connection Profiles

Bluetooth Mode Description
Basic Mode (HID) (Default)*Human Interface Device Profile
  • NO software installation required
  • Connects to most devices
  • Good for barcodes containing small amounts of data
  • Scanner interacts with host device like a keyboard
Application Mode (SPP)Serial Port Profile For Android or Windows

  • Software installation is required
  • More efficient and reliable data communications for barcodes containing lots of data
  • If you have an application that supports Socket Mobile Scanners this is the mode recommended
Application Mode (MFI-SPP)Apple Specific Serial Profile For iOS Devices

  • Must use with an App developed to work with iOS devices
  • Software installation is required
  • If you have an iOS application that supports Socket Mobile Scanners this is the mode you want to use

*By default, the scanner is set to Basic Mode (HID). 

BLUETOOTH CONNECTION MODES

Operating System Connection Options

OperatingSystems (OS) Devices BluetoothHID Support BluetoothSPP Support Bluetooth Apple Serial Specific(MR Mode)
Android Android 4.0.3 & later Yes Yes N/A
Apple iOS iPod, iPhone, & iPad Yes N/A Yes
Windows PC Windows 7, 8, 10 Yes Yes N/A
Mac OS Mac OS X 10.4 to 10.XMac Books, Mac Mini, &iMac Yes No N/A

Note: To switch from one mode to the other you must remove the pairing information from both devices – the host computer and the scanner. (see the unpairing procedure on page 17)The SocketScan will unpair and automatically power off. The next time you power on the SocketScan, it will be discoverable.Select the appropriate mode and pair it with the second host device.COMPANION APP

To assist in scanner setup and configuration, download our new Companion App for free!Socket Mobile Companion App will help you configure and check the status of your Socket Mobile barcode scanners.

  • Easy to follow instructions for pairing scanners in Application Mode
  • Verify scanner status
  • Check the warranty and register scanners

Learn more about Application Mode.

Scan this QR code with your mobile device to download our new app! Scan this QR code with your mobile device to download our new app!

BASIC MODEConnect Device in Basic Mode In this mode the scanner functions and communicates similar to a keyboard. Therefore, the scanner will work with Notes and any other application that supports an active cursor.

  1. Power on the scanner. Make sure the scanner is discoverable (unpaired and Bluetooth LED blinking).
  2. Go to Settings > Bluetooth.
  3.  Make sure the Bluetooth is “On” and scan for devices.
  4. In the list of found devices, tap S8xx [xxxxxx] to Pair.
  5.  The scanner will connect to the host device.
  6. The scanner will beep once after it has connected

*If you have trouble connecting or pairing with a host device, turn the host device’s Bluetooth off/on, and/or perform a factory reset on the scanner (see page 49).Now you are ready to scan barcodes!

APPLICATION MODE

Connect Apple iOS device in Application ModePlease check with your scanner application vendor or visit www.socketmobile.com/appstore to confirm your scanner-enabled application supports the scanner. If you are using the scanner with an Apple iOS device and a scanner-enabled Application that does not provide instructions on how to connect your scanner, please use the following steps.1. Power on the scanner. Make sure the scanner is discoverable (unpaired). The Blue light should be blinking fast.2. Scan the barcode to change the profile to Application Mode (MFI-SPP).

Use with iPad, iPod touch, and iPhones.

3. Turn on Bluetooth on the Apple device. Go to Settings > Bluetooth. A Bluetooth Devices search will begin. 12

APPLICATION MODE4. Tap Socket S8xx[xxxxxx] in the list of other devices found. After a few seconds, the status will change to “Connected” and the LED will stop blinking and turn solid blue.Note: The characters in brackets are the last 6 characters of the Bluetooth Address.5. Launch your scanner-enabled Application. The scanner will beep once indicating that it is connected to the appropriate application.Now you are ready to scan barcodes!APPLICATION MODEApplication Mode (SPP) for Windows (option 1) or Android(Auto-Connect – No configuration required for Application pairing)

  1.  Power on the scanner. Make sure the scanner is discoverable (unpaired). The Blue light should be blinking fast.
  2. Scan the barcode to change the profile to Application Mode (SPP).
  3.  Turn on Bluetooth on the Android device. Go to Settings > Bluetooth. A Bluetooth Devices search will begin.
  4. Tap Socket S8xx[xxxxxx] in the list of other devices found. After a few seconds, the status will change to “Connected” and the LED will stop blinking and turn solid blue.

Note: The characters in brackets are the last 6 characters of the Bluetooth Address.5. Launch your scanner-enabled Application. The scanner will beep once indicating that it is connected to the appropriate application.Now you are ready to scan barcodes! 

APPLICATION MODEApplication Mode (SPP) for Android for S800 Rev. M and below(Auto-Connect – No configuration required for Application pairing)

  1. Power on the scanner. Make sure the scanner is discoverable (unpaired). The Blue light should be blinking fast.
  2.  Scan the barcode to change the profile to Application Mode (SPP).
  3.  Turn on Bluetooth on the Android device. Go to Settings > Bluetooth. A Bluetooth Devices search will begin.
  4. Tap Socket D760[xxxxxx] in the list of other devices found. After a few seconds, the status will change to “Connected” and the LED will stop blinking and turn solid blue.

Note: The characters in brackets are the last 6 characters of the Bluetooth Address.5. Launch your scanner-enabled Application. The scanner will beep once indicating that it is connected to the appropriate application.Now you are ready to scan barcodes! 

APPLICATION MODEConnect Windows (option 2) in Application ModeNote: Make sure you have administrative privileges.

  1.  Download the latest SocketScan 10 software from Socket Mobile’s support web page.
  2.  Follow the on-screen instructions to install the software.
  3.  In SocketScan 10 Settings, select an incoming Bluetooth serial COM port.
  4. Power on the scanner. Make sure the scanner is discoverable to be connected to Bluetooth (unpaired and Bluetooth LED blinking).
  5. Launch SocketScan 10 and click on the SocketScan 10 icon in the task tray. In the pop-up menu, click Socket EZ Pair.
  6.  Scan the barcode that appears on the screen.
  7. Open the Bluetooth settings, add and pair the scanner manually.
  8.  Open SocketScan. From the EZ pair, select the pre-paired Bluetoothoption. Click on the scanner to pair.

Note: If there is none, please click Ports to create at least one new incoming COM port in Bluetooth settings. (If prompted for a passkey, enter 0000)Note: The characters in brackets are the last 6 characters of the Bluetooth Address.Now you are ready to scan barcodes!BLUETOOTH UNPAIRING

Note: This procedure will put the SocketScan in discoverable mode.Step1: Unpairing the scanner: Delete the Bluetooth PairingIf the scanner is paired with a device, unpair it before trying to connect to a different device.a. Power on the scanner.b. Press the trigger button then the power button and hold both until you hear 3 beeps.The scanner will unpair and automatically power off. The next time you power on the scanner, it will be discoverable.Step 2: Remove or forget the scanner from the Bluetooth list on the host device.Important: Both steps above must be done to complete the unpairing.

FACTORY RESET

Factory Reset will restore the scanner to Factory Default settings (configured as shipped). If your scanner cannot scan the Factory Default barcode below, then Follow the Factory Reset (button) sequence:Scan this barcode

Or follow the steps below to manually reset the scanner:

  1. Turn ON the scanner.
  2. Press and hold the trigger button 1, then quickly press and release the power button 2, while continuing to hold the trigger button.
  4. Let go of the trigger button after the scanner beeps once (after 15 seconds). Five confirmation tones will sound from high to low tones and then the scanner will turn OFF.

Note: If you follow this sequence, but release the trigger button too early (before 15 seconds and the beep) the Factory Reset will have failed.

RESTORE METHOD

NOTE: If your scanner remains in an unresponsive state after following the Factory Reset, use the Restore Method as a last resort.The Restore Method should be the last attempt used to revive an unresponsive scanner. It will reinitialize the core hardware.

  1. Make sure your scanner is OFF.
  2. Press and hold the power button until the LED light goes on and off (about 15 seconds)

STATUS INDICATORS

Top LED Bluetooth LED Activity Meaning
Quick Blinking Blue(2 blinks every second) Discoverable – waiting for a host Bluetooth connection.
Slow Blinking Blue(1 blink every second) The scanner is attempting to connect to the last known host device.After 1 minute of blinking, the scanner will stop searching.
Solid Blue Scanner connected
Side LED LED Activity Meaning
Blink Green Once Good Scan/Read
Side LED  Battery Status LED Activity Meaning
Connected to power Solid Red (while charging) Charging the battery
Solid Green (while charging) Battery is full
Not connected to power No Light Battery capacity above 20%
Blinking Red Battery capacity below 20%

 

Beep Pattern Sound Meaning
Low-High Tone Power On
High-Low Tone Power Off
High-High Tone Power Supply was detected and the scanner started charging
1 Low Beep The scanner has toggled on-screen keyboard or keyboard toggle feature is enabled (iOS devices only)
1 Beep A scanner is connected to the device and is ready to scan barcodes
1 Beep Data successfully scanned
2 Beeps (same tone) Scanner disconnected
1 Long Beep The scanner gave up searching for a host
3 Beeps (escalating tone) The scanner has been reconfigured (the command barcode was scanned successfully)
3 Beeps (escalating tone followed by long tone) The command barcode did NOT work! (Verify if the command barcode used is valid for your scanner and try again)

PRODUCT SPECIFICATIONS

Vibrate Meaning
Meaning Data successfully scanned

Command Barcodes are available on pages 43-46 to modify the LED, beep, and vibrate settings.If you are using a scanner-enabled application, typically the application provides settings for LED, beep, and vibrate settings.

Configuration Settings

Time after powering on Scanner Bluetooth mode
0-5 minutes Discoverable and connectable
5 minutes If the connection is not made, scanner powers off
2 hours If your scanner is connected but not used it will power off in 2 hours. When the trigger button is pressed the timer is reset.

PRODUCT SPECIFICATIONS

Specifications 5800                                     5840/5860

3.42 x 0.52 x 2.12 in. (86.9 x 53.94 x 13.43 mm)
Dimensions (L x W x H)
Total Mass 1.7 oz (48.2 g)
Antimicrobial Antimicrobial additive in external surfaces
Battery Lithium ion rechargeable battery
Charge Time 8 Hours
Battery Life – Per Full Charge 8,000 scans within 9 hours  (calculation based on 1 scan every 4 seconds) 34,000 scans within 3 hours (based on 2 scans every 1 second) or 1,000 scans within 10 hours (based on 1 scan every 4 seconds)
Note: Battery life varies depending on ambient temperature, ambient light, and age of the battery.
Bluetooth Version Class 1 Bluetooth v21 + EDR with 56 bit data encryption
Wireless Range Up to 10 m (33 ft), depending on the environment
Scanner Type 1D Linear Imager 5840/S860: 2D/1D Omnidirectional Imager 5860: scans OCR A + B fonts

 

Specifications S800 S840/S860
Default Symbologies CODE 39, CODE 128, EAN 8, EAN 13, GS1 DATABAR, GS1 DATABAR  EXPANDED STACKED, GS1 DATABAR  EXTENDED, GS1 DATABAR LIMITED, INTERLEAVED 2 OF 5, ISBT 128, UPC A, UPC E (0) S840/S8601D Symbologies:Codabar, Code 39, Code 93, Code 128, EAN-13/ JAN, EAN-8/JAN, GS1 Databar, GS1 Databar Expanded, GS1 Databar Limited, GS1-128, Interleaved 2 of 5, ISBT 128, UPC A, UPC EO 2D Symbologies: Aztec,Data Matrix, Maxicode, Micro PDF417, PDF417 Postal Codes: Australia PostS860 onlyOCR Type Face: OCR BICAO Travel Documents
Supported Language Settings [in Basic Mode (HID)] English, French, German, Spanish
Systems/ Battery Charging Requirement USB Type 5V 1A
Ambient Light From 0 to 100 000 lux
Operating Temperature +32 to +122°F (0 to +50°C)
Storage Temperature -22 to +158°F (-30 to +70°C)
Relative Humidity 5% to 95% non-condensing
Sealing IP40
Drop Specifications Multiple 3.3 ft (1 m) drops to vinyl-covered concrete

HELPFUL RESOURCES

Technical Support & Product Registration:support.socketmobile.comPhone: 800-279-1390 +1-510-933-3020 (worldwide)Warranty Checker:socketmobile.com/support/warranty-checkerSocket Mobile Developer Program:Learn more at: socketmobile.com/developersThe User’s Guide (full installation and usage instructions) andCommand Barcodes (Advanced Scanner Configurations) can bedownload at:socketmobile.com/support/downloads

SAFETY AND HANDLING INFORMATION

WARNING: Failure to follow these safety instructions could result in fire or other injury or damage to the barcode scanners or other property.Carrying and Handling the SocketScan barcode scanners: The Socket Mobile barcode scanner contains sensitive components. Do not disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign objects into this unit.Do not attempt to disassemble the product. Should your unit need service, contact Socket Mobile technical support at https://support.socketmobile.com/ Changes or modifications of this product, not expressly approved by Socket Mobile may void the user’s authority to use the equipment.Do not charge the SocketScan barcode scanner using an AC adapter when operating the unit outdoors, or in the rain.Operating Temperature – this product is designed for a maximum ambient temperature of 50° degrees C or 122° degrees F.Pacemaker Disclaimer: We do not have specific information on the effect(s) of vibration or devices with Bluetooth wireless technology on pacemakers. Socket Mobile cannot provide any specific guidance. Individuals who are concerned with using the barcode scanner should immediately turn the device off.

BLUETOOTH DEVICE UNITED STATES

FCC ID: T9J-RN42, LUB-MA41

  • Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example – use only shielded interface cables when connecting to computer or peripheral devices).FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device meets the FCC requirements for RF exposure in public or uncontrolled environments. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation

BLUETOOTH DEVICE CANADA

IC ID: 6514A-RN42 , 2529A-MA41-S8This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

BLUETOOTH DEVICE EUROPE

CE Marking & European Union Compliance

Products intended for sale within the European Union are marked with a CE Mark, which indicates compliance to applicable Directives and European Normes (EN), as follows. Amendments to these Directives or ENs are included: Normes (EN), as follows:

CONFORMS TO THE FOLLOWING EUROPEAN DIRECTIVESLow Voltage Directives: 2014/35/EURED Directive: 2014/53/EUEMC Directive: 2014/30/EURoHS Directive: 2011/65/ECWEEE Directive: 2012/19/EC

Supplementary Information:

Safety:A2:2013EN 60950-1: 2006/A11:2009, A12:2011, A1:2010,ETSI EN 300 328ETSI EN 301 489

BLUETOOTH DEVICE JAPAN

Telec Marking Compliance

201-125799xxx-xxxxxx

Products intended for sale within the country of Japan are marked with a Telec mark, which indicates compliance to applicable Radio Laws, Articles and Amendments.

BATTERY WARNING STATEMENTS

This device contains a rechargeable Lithium-Ion battery. Stop charging SocketScan barcode scanners if charging isn’t completed within the normal specified time (approx. 8 hours).Stop charging the battery if the SocketScan barcode scanner case becomes abnormally hot, or shows signs of odor, discoloration, deformation, or abnormal conditions is detected during use, charge, or storage.Stop using the SocketScan barcode scanner if the enclosure is cracked, swollen, or shows any other signs of misuse. Discontinue immediately and email [email protected]Your device contains a rechargeable Lithium-Ion battery, which may present a risk of fire or chemical burn if mistreated.Do not charge in hot temperatures over 60 degrees C or 140 degrees F.

  • Never throw the battery into a fire, as that could cause the battery to explode.
  • Never short circuit the battery by bringing the terminals in contact with another metal object. This could cause personal injury, or fire, and could also damage the battery.
  • Never dispose of used batteries with other ordinary solid wastes. Batteries contain toxic substances.
  • Dispose of used batteries in accordance with the prevailing community regulations that apply to the disposal of batteries.
  • Never expose this product or the battery to any liquids.
  • Do not shock the battery by dropping it or throwing it.

If this unit shows any type of damage, such as bulging, swelling, or disfigurement, discontinue use and email [email protected].Product DisposalYour device should not be placed in municipal waste. Please check local regulations for the disposal of electronic products.

CAUTION:Risk of explosion if the battery is replaced by an incorrect type.Only use Lithium Ion rechargeable batteries provided by the manufacturer.

LED DEVICES

Caution: DO NOT STARE DIRECTLY INTO THE LED BEAM.LED DEVICE:The SocketScan S800, S840, and S860 contain a LED-type scan engine.For the LED version of this engine, the following applies:

  • Complies with EN/IEC 62471 (Exempt Group)
  • LED output is in the 630-670nm range (visible red).
  • LED devices are not considered to be hazardous when used for their intended purpose.

The following statement is required to comply with the US and international regulations:Caution: Use of controls, adjustments, or performance of procedures other than those specified herein may result in hazardous LED light exposure.

REGULATORY COMPLIANCE

CE MARKING AND EUROPEAN UNION COMPLIANCETesting for compliance to CE requirements was performed by an independent laboratory. The unit under test was found compliant with all the applicable Directives, 2004/108/EC and 2006/95/EC.WASTE ELECTRICAL AND ELECTRONIC EQUIPMENTThe WEEE directive places an obligation on all EU-based manufacturers and importers to take back electronic products at the end of their useful life.

RoHS STATEMENT OF COMPLIANCEThis product is compliant to Directive 2011/95/EC.NON-MODIFICATION STATEMENTChanges or modifications not expressly approved by the party responsible for compliance.

CONFORMS TO THE FOLLOWING EUROPEAN DIRECTIVES

Low Voltage Directives: 2014/35/EURED Directive: 2014/53/EUEMC Directive: 2014/30/EURoHS Directive: 2011/65/ECWEEE Directive: 2012/19/EC

Supplementary Information:Safety:EN 60950-1: 2006/A11:2009, A12:2011, A1:2010, A2:2013ETSI EN 300 328ETSI EN 301 489

LIMITED WARRANTY

Socket Mobile Incorporated (Socket) warrants this product against defects in material and workmanship, under normal use and service, for one (1) year from the date of purchase. The product must be purchased new from a Socket Authorized Distributor or Reseller. Used products and products purchased through non-authorized channels are not eligible for this warranty support.Warranty benefits are in addition to rights provided under local consumer laws. You may be required to furnish proof of purchase details when making a claim under this warranty.Consumables such as batteries, removable cables, cases, straps, and chargers: 90-day coverage onlyFor more warranty information, please visit: https://www.socketmobile.com/support/downloads/product-support

COMMAND BARCODES

Scan command barcode(s) to quickly configure the Scanner.Make sure the scanner is not connected to a device before scanning a command barcode! See page 17 for unpairing instructions.

For a complete set of command barcodes, download the Command Barcodes Sheet: https://socketmobile.com/support/download

Charging Stand Modes

Auto Mode

Scan the barcode to configure your scanner to automatically detect barcodes without pressing the scan button. *Only works when in Charging Stand.

#FNB 41FBA50003#
Mobile Mode – Normal (default)* Scanning this bar code will enable the scanner to enter mobile mode. It will always be in manual trigger mode even when placed in the stand or cradle.*Scanner Factory Reset returns to Mobile Mode.

#FNB 41FBA50000#

COMMAND BARCODES (CONTINUED)

Bluetooth Connection Modes

Basic Mode (HID) (default) Configures the Scanner  to Human Interface Device (HID) mode as a Keyboard  class device
Application Mode (MFi-SPP) for Apple iOS devices Configures scanner to work with an application.
Application Mode (SPP) for Windows or Android 8.0 and later (Auto-Connect – Scan the barcode and pair the scanner with your device.)
Application Mode (SPP) for Windows or Android version 7.0 and  lower Configures scanner to Serial Port Profile.
Scanner Always On* Configures the scanner to never power off.
Continuous Power for 8 hours* Scan Barcode to configure the scanner to remain on for 8 hours.

Always Active ModeFor busy days on the job, try using the Active Mode to keep you moving faster. Avoid the hassle of turning the scanner on again and reconnecting to your host device.Scan one of the barcodes below and reconfigure the scanner to remain on longer.Note: Turn off the host device’s Bluetooth prior to scanning one of the alternate timer barcodes. Then turn the Bluetooth back on. Power cycle the scanner (turn off/on).

COMMAND BARCODES (CONTINUED)

Continuous Power for 4 hours* Scan Barcode to configure the scanner to remain on for 4 hours.
Return Scanner to Default  SettingTurns the scanner off when it is not in use – 3 to 5 minutes after being disconnected from the host device.

 

Important! Make sure the Scanner is not connected to a host computer or device before scanning a command barcode!

 

 

Beep Settings
Beep after scanner Decodes Data ON (default) Enables scanner to beep to indicate successful scans.
Beep after scanner Decodes Data OFF Disables scanner from beeping to indicate successful scans.

Vibrate Settings
Vibrate ON (default) Enables scanner to vibrate to indicate successful scans.
Vibrate OFF Disables scanner from vibrating to indicate successful scans.

#FNB013100010000#

Factory Default
Factory Reset Revert all settings to factory defaults. The scanner will power off after scanning this barcode.

 

For more command codes go to: https://socketmobile.com/support/download

Extend Your Warranty…

Receive Priority Service and Personal Care.You have 60 days from the purchase date to enroll in a SocketCare ServiceProgram!For detailed information visit:https://www.socketmobile.com/socketcare

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

,