TOILET BRUSHWITH HOLDERMANUAL
PACKAGE CONTENTS
- 1 toilet brush holder incl. water reservoir
- 1 toilet brush
- 1 toilet brush cover
- 2 screws
- 2 plugs
- 1 Allen key
- 1 manual
ATTENTION!Keep small parts away from children
INSTALLATION STEPS
1. Determine the location where the toilet brush will hang. Mark the location of the screws to be installed | |
2. Drill a hole at the marked places | |
3. Carefully tap the plugs into the holes with a suitable hammer | |
4. Screw on the mounting plate | |
5. Hook the toilet brush holder over the mounting plate | |
6. Lock it by tightening the Allen screw with the Allen key |
TIPS
- Use a spirit level before drilling holes. This way you ensure that the towel rack hangs straight.
- Before you start drilling, check that there are no pipes (behind the tiles).
- If you are going to drill in tiles, do not use the hammer setting of the drill. That is too rough for (fragile) tiles. Use a tile drill.
- By applying painter’s tape to the place where you want to drill, the drill bit slips less quickly, so that the tiles remain better protected.
- Then start drilling at a slow pace and gradually increase this pace.
[xyz-ips snippet=”download-snippet”]