Sole 16608900250 E25 ELLIPTICAL Owner’s Manual

Table of Contents

16608900250 E25 ELLIPTICAL

TABLE OF CONTENTS

Product Registration

Important Safety Instructions

Important Electrical Instructions

Important Operation Instructions

Transport Instructions

E25 Assembly Instructions

Operation of Your New Elliptical

Bluetooth® Connectivity

Programmable Features

Using Heart Rate Transmitter

General Maintenance

Exploded View Diagram

Parts List

Manufacturer’s Limited Warranty

ATTENTIONTHIS ELLIPTICAL IS INTENDED FOR RESIDENTIAL USE ONLY AND IS WARRANTED FOR THE APPLICATION. ANY OTHER APPLICATION VOIDS THIS WARRANTY IN ITS ENTIRETY.

Customer service 1-888-707-1880

Email:

Ver. EE25 ELLIPTICAL

CONGRATULATIONS ON YOUR NEW ELLIPTICAL, AND WELCOME TO THE SOLE FAMILY!Thank you for your purchase of this quality Sole elliptical from Dyaco Canada Inc. Your new elliptical has been manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available. Dyaco Canada Inc. will do all we can to make your ownership experience as pleasant as possible for many years to come.If you have any questions about your new Sole product or questions about the warranty, contact Dyaco Canada Inc. at 1-888-707-1880.Please take a moment at this time to record below the name of the dealer, their telephone number, and the date of purchase for easy contact in the future. We appreciate your confidence in SOLE, and we will always remember that you are the reason that we are in business. Please go to www.dyaco.ca/warranty.html and complete the online warranty registration.Yours in Health, Dyaco Canada Inc.Name of DealerTelephone Number of DealerPurchase Date

PRODUCT REGISTRATIONRECORD YOUR SERIAL NUMBER Please record the Serial Number of this fitness product in the space provided below.Serial Number

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

IMPORTANT SAFETY INSTRUCTIONSWARNING – Read all instructions before using this equipment.DANGER – To reduce the risk of electric shock, disconnect your SOLE elliptical from the electrical outlet prior to cleaning and/or service work. WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons, install the elliptical on a flat level surface with access to a 120-volt, 15-amp grounded outlet with only the elliptical plugged into the circuit.DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER, WITH ONLY ONE OUTLET ON THE END: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING IMPROPER ADAPTERS OR IN ANY WAY MODIFY THE CORD SET.A serious shock or fire hazard may result in computer malfunctions. See Grounding Instructions if applicable Do not operate elliptical on deeply padded, plush or shag carpet. Damage to both carpetand elliptical may result. Keep children under the age of 13 away from this machine. There are obvious pinchpoints and other caution areas that can cause harm. Keep hands away from all moving parts. Never operate the elliptical if it has a damaged cord or plug. If the elliptical is not workingproperly, call your dealer. Keep the cord away from heated surfaces. Do not operate where aerosol spray products are being used or where oxygen is beingadministered. Sparks from the motor may ignite a highly gaseous environment. Never drop or insert any object into any openings. Do not use outdoors. To disconnect, turn all controls to the off position and then remove the plug from theoutlet. Do not attempt to use your elliptical for any purpose other than for the purpose it isintended. The hand pulse sensors are not medical devices. Various factors, including the user’smovement, may affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in determining heart rate trends in general. Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your elliptical. Quality athletic shoes are recommended to avoid leg fatigue. This equipment is not intended for use by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the equipment by a person responsible for their safety.SAVE THESE INSTRUCTIONS – THINK SAFETY!

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

IMPORTANT ELECTRICAL INSTRUCTIONSWARNING! NEVER remove any cover without first disconnecting AC power. If voltage varies by ten percent (10%) or more, the performance of your elliptical may be affected. Such conditions are not covered under your warranty. If you suspect the voltage is low, contact your local power company or a licensed electrician for proper testing. NEVER expose this elliptical to rain or moisture. This product is NOT designed for use outdoors, near a pool or spa, or in any other high humidity environment. The operating temperature specification is 40 to 120 degrees Fahrenheit, and humidity is 95% non-condensing (no water drops forming on surfaces).GROUNDING INSTRUCTIONSThis product must be grounded. If the elliptical should malfunction or breakdown, grounding provides a path of least resistance for electric current, reducing the risk of electric shock. This product is equipped with a cord having an equipment-grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER – Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product if it will not fit the outlet; have a proper outlet installed by a qualified electrician. This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug illustrated below. A temporary adapter that looks like the adapter illustrated below may be used to connect this plug to a 2-pole receptacle as shown below if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet (shown below) can be installed by a qualified electrician. The green-coloured rigid ear-lug, or the like, extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

IMPORTANT OPERATION INSTRUCTIONSNEVER operate this elliptical without reading and completely understanding the results of any operational change you request from the computer.Understand that changes in resistance and incline do not occur immediately. Set your desired resistance level on the computer console and release the adjustment key. The computer will obey the command gradually.NEVER use your elliptical during an electrical storm. Surges may occur in your household power supply that could damage elliptical components. Unplug the elliptical during an electrical storm as a precaution.Use caution while participating in other activities while using your elliptical, such as watching television, reading, etc. These distractions may cause you to lose balance, which may result in serious injury.Always hold on to a handlebar while making control changes (incline, level, etc.). Do not use excessive pressure on console control keys. They are precision set to functionproperly with little finger pressure. If you feel the buttons are not functioning properly with normal pressure, contact your dealer.

POWER CONNECTOR – FRONT, LEFT SIDE OF UNITTRANSPORT INSTRUCTIONSThe elliptical is equipped with two transportation wheels which are engaged when the rear of the elliptical is lifted.

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

E25 ASSEMBLY PACK CHECKLIST1 HARDWARE STEP 1

#171. 3/8″ x 19 x 1.5T Flat Washer (6 pcs)

#166. 5/16″ x 20 x 1.5T #128. 3/8″ x 1-1/2″

Flat Washer (4 pcs)

Hex Head Bolt (2 pcs)

#175. 3/8″ x 2T Split Washer (4 pc)

#140. M5 x 10mm Phillips Head Screw (6 pcs)

#158. 3/8″ x 7T Nylon Nut (2 pcs)

#176. 5/16″ x 1.5T Split Washer (4 pcs)

#177. 5/16″ Star Washer (4 pcs)

#129. 3/8″ x 3/4″ Socket Head Cap Bolt (4 pc)

#124. 5/16″ x 2-1/4″ Hex Head Bolt (4 pcs)

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

2 HARDWARE STEP 2

#65. Switch Wire Cap (2 pcs)

#120. 5/16″×18×15L Hex Head Bolt (2 pcs)

#167. 5/16″ x 23x 1.5T Flat Washer (2 pcs)3 HARDWARE STEP3

#122. 5/16″×1-1/4″ Hex Head Bolt (2 pcs)

#166. 5/16″ x 20 x 1.5T Flat Washer (2 pcs)

#155. 5/16″ x 7T Nyloc Nut (2 pcs)

4 HARDWARE STEP 4

#138. M5 x 15mm Phillips Head Screw (20 pcs)

#145. 3.5 x 12mm Sheet Metal Screw (16 pcs)

#146. M6 x 10mm Phillips Head Screw (4 pcs)

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

ASSEMBLY TOOLS

#186. 13/14mm Wrench

#189. 12/14mm Wrench

#187. Short Phillips Head Screwdriver

#188. Phillips Head Screwdriver

#197. L Allen Wrench

E25 ASSEMBLY INSTRUCTIONSPRE-ASSEMBLY1. Use a razor knife or box cutter to cut the outside, bottom, and edge of the box along the dotted line. Lift the box over the unit and unpack.2. Carefully remove all parts from the carton and inspect for any damage or missing parts. If damaged parts are found, or if parts are missing, contact your dealer immediately.3. Locate the hardware package. Remove the tools first. Remove the hardware for each step as needed to avoid confusion. The numbers in the instructions that are in parenthesis (#) are the item number from the assembly drawing for reference.

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

1 INCLINE RAIL & CONSOLE MAST See Page 10 for Illustration1. Install the Incline Rail Assembly (2) into the U-channel bracket of the Main Frame (1). Secure with the six bolts & associated hardware as follows: From the sides, install two Hex Head Bolts (128) with two Flat Washers (171) and two Nylon Nuts (158). From the top install four Hex Head Bolts (124), 4pcs Split Washers (176), four Flat Washers (166), and four Star Washers (177), as shown in figure1. Tighten with the Wrenches provided (186 & 189).2. Connect the 3-wire harness: Incline Motor Power Cord (43) to the female receiver cable coming from the Incline Rail Assembly (2). Connect the Three pin position Sensor connector: Incline Motor Connecting Wire (44) to the female receiver coming from the Incline Rail Assembly (2).3. Run the Computer Cable (45) through the Console Mast (12), and pull the opposite end of this twist, tied up on the Console Mast (12), until the cable exits the top. Install the Console Mast (12) into the receiving bracket on the top of the Main Frame (1). Install four Socket Head Cap Bolts (129) with four Split Washer (175) and four Flat Washers (171). Tighten with the provided L Allen Wrench (197). Pull slightly on the computer cable at the top of the mast while installing. This will ensure the cable does not get pinched and shorted during console mast assembly.4. Install the Bottle Holder (105) to the Console Mast (12) with two Phillips Head Screws (140) and tighten with the provided Phillips Head Screwdriver (188). *Please note that the bottle holder must be assembled before console assembly.5. Plug all of the connectors into the back of the console, including the Computer Cable (45), two Hand pulse Cables (52, 53), Resistance Switch Wire (55) and the Incline Switch Wire (56). Secure the Console (40) on the console mounting plate with 4pcs Phillips Head Screws (140).2 LOWER HANDLEBAR ARMS See Page 10 for Illustration 1. Slide the Left (10) and Right (11) Handlebars onto the appropriate side of the axle. The handlebars have a small sticker on them indicating L (left) and R (right). Make sure the handlebars are facing the correct direction see illustration. 2. In the threaded holes in the ends of the axle, install and tighten two Flat Washers (167) onto the two Hex Head Bolts (120). 3. Connect the Upper Resistance Handle Wire (55) with the Lower Resistance/Incline Handle Wire (57) and store it in the frame tube. Snap in the Switch Wire Cap (65) on the console mast. Again, connect the Upper Incline Handle Wire (56) with the Lower Resistance/Incline Handle Wire (57) and store it in the frame tube. Snap in the Switch Wire Cap (65) on the console mast.

Hardware Step 1#129. 3/8″ x 3/4″ Socket Head Cap Bolt (4 pcs) #128. 3/8″ x 1-1/2″ Hex Head Bolt (2 pcs) #124. 5/16″ x 2-1/4″ Hex Head Bolt (4 pcs) #140. M5 x 10mm Phillips Screw (6 pcs) #158. 3/8″ x 7T Nylon Nut (2 pcs) #171. 3/8″ x 19 x 1.5T Flat Washer (6 pcs) #166. 5/16″ x 20 x 1.5T Flat Washer (4 pcs) #175. 3/8″ x 2T Split Washer (4 pc) #176. 5/16″ x 1.5T Split Washer (4 pcs) #177. 5/16″ Star Washer (4 pcs)Hardware Step 2#65. Switch Wire Cap (2 pcs) #120. 5/16″×18×15L Hex Head Bolt (2 pcs) #167. 5/16″ x 23x 1.5T Flat Washer (2 pcs)

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

1 ASSEMBLY STEP 1

2 ASSEMBLY STEP 2

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

3 UPPER HANDLEBAR ARMS See Page 12 for Illustration1. Untie the rod end bearing on the left Connecting Arm (8). Insert the Hex Head bolt (122) through the rod end bearing bracket on the Handlebar (10). Tighten them together in the rod end bearing bracket on the Handlebar with a flat washer (166) and a nyloc nut (155). Use the wrench (186) and the wrench (189) to tighten. Assemble the right Handlebar (11) and the right Connecting Arm (9) with the same procedure and hardware.

Hardware Step 3#122. 5/16″×1-1/4″ Hex Head Bolt (2 pcs) #166. 5/16″ x 20 x 1.5T Flat Washer (2 pcs) #155. 5/16″ x 7T Nyloc Nut (2 pcs)

PLASTIC PARTSSee Page 12 for IllustrationUse either screwdriver (187 or 188) to secure the following plastic parts.1. Match the Connecting Arm Covers (L) and (R), (92) and (93), on the Connecting Arm (L) (8) and secure two Phillips Head Screws (138) and a Sheet Metal Screw (145) using the Short Phillips Head Screwdriver (187). Repeat on the other side.2. Install Slide Wheel Covers (94) above each side of the Slide Wheel, and secure four Phillips Head Screws (138) by using the Phillips Head Screwdriver (188).3. Use two Phillips Head Screws (138) to secure the left and right Middle Stabilizer Covers (115 and 116) on the stabilizer in the middle. Tighten with the Phillips Head Screwdriver (188).4. Use two Phillips Head Screws (138) to secure the Front Stabilizer Cover (110) on the front stabilizer with the Phillips Head Screwdriver (188).5. Install the Cover Holders (21), with the hole for mounting the plastic cover on the bent tab facing rearward and secure them on the Incline Rail Assembly (2) with four Phillips Head Screws (146). Install the Inclinable Rail Cover (113) on the rail base with two Phillips Head Screws (138).6. Secure the Rear Bar Cover (114) on the Rear Stabilizer and the Cover Holders (21) with four Phillips Head Screws (138) using the Phillips Head Screwdriver (188).7. Raise the incline by 3~8 levels by operating the console. Secure the Incline Bottom Cover (111) on both sides of the Incline Rail Assembly with two Phillips Head Screws (138), using the Phillips Head Screwdriver (188).8. Match the right and left Console Mast Covers (95 &95~1). Install the covers with four Sheet Metal Screws (145) to the Console Mast (12).9. Install the Handlebar Covers (106 & 107, 108 & 109) over the Handlebar axle connections and secure with six Sheet Metal Screws (145), using the Phillips Head Screwdriver (188).10. Install the Tablet Holder (104) to the back of the console with four Sheet Metal Screws (145).

Hardware Step 4#138. M5 x 15mm Phillips Head Screw (20 pcs) #145. 3.5 x 12mm Sheet Metal Screw (16 pcs) #146. M6 x 10mm Phillips Head Screw (4 pcs)

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

3 ASSEMBLY STEP 3 4 ASSEMBLY STEP 4

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

OPERATION OF YOUR ELLIPTICALGETTING FAMILIAR WITH THE CONTROL PANELE25 CONSOLE

SPEAKER

COOLING FANCHARGE PORTABLE DEVICES WITH USB PORT

PROGRAM BUTTONS (Manual, Hill, Fat Burn, Strength, HIIT, 2 User, 2HR)DISPLAYAUDIO IN JACK (MP3, CD, ORSMARTPHONE)

FAN POWER SWITCH HEADPHONE JACK

POWER UP When power is connected to the elliptical, the console will automatically power up. This model is connected directly to 120 VAC, and there is a power switch located where the line cord plugs into the unit on the left side near the front (See page 5 for location).When it is first powered on, the console will perform an internal self-test. During this time, all the lights will turn on, the Message Window display will show a software version (i.e., VER 1.0), and the Distance Window will display an odometer reading. The odometer shows how many virtual miles the elliptical has gone. The Time Window shows how many total hours the elliptical has been used.The odometer and time will remain displayed for only a few seconds then the console will go to the startup display. The dot matrix display will be scrolling through different workout profiles, and the Message Window will be scrolling the startup message. You may now begin to use the console.

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

CONSOLE OPERATIONSTART KEY This is the quickest way to start a workout. After the console powers up, just press the Start key to begin. This will initiate the Start key mode. In Start key, the time will count up from zero. The resistance level and incline can be adjusted manually by pressing the Level / & incline / buttons. The dot matrix display will be showing a track with a blinking dot indicating your progress as it travels around the track.BASIC INFORMATION The Message Window will initially display Laps completed for the elliptical. Each time the Display button is pressed, the next set of information will appear. The order of information displayed will be Speed (in MPH), RPM, Level, Watts, Segment Time and Data Scan mode. In Data Scan mode, the displayed information will change every 4 seconds in the Message Window.The elliptical has a built-in heart rate monitoring system. Simply grasp the Contact Heart Rate Sensors on the stationary handlebars or wear the chest strap transmitter, and the heart icon will start blinking (this may take a few seconds). The Pulse Window will display your heart rate in beats per minute, and the HR bar graph will show your current % in relation to the projected heart rate maximum. The chest strap is a more accurate and reliable method of heart rate reading. The hand pulse sensors are subject to false readings depending on user physiology and workout habits, including how one grips the sensors or how sweaty their hands are.The Stop button actually has several functions. Pressing the Stop key once during a program will Pause the program for 5 minutes. If you need to get a drink, answer the phone or any of the many things that could interrupt your workout, this is a great feature. To resume your workout during Pause, just press the Start key. If the Stop button is pressed twice during a workout, the program will end, and a Workout Summary will be displayed.If the Stop key is held down for 3 seconds, the console will perform a complete Reset. During data entry for a program, the Stop key performs a Previous Screen function. This allows you to go back one step in the programming each time you press the Stop key.There is an Audio In Jack ( ) at the front of the console and built-in speakers. You may plug any low-level audio source signal into this port. Audio sources include MP3, iPod, portable radio, CD player, a TV or even a computer audio signal. There is also a Headphone Jack ( ) for private listening.

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

PROGRAMMING THE CONSOLE Each of the programs can be customized with your personal information and changed to suit your needs. Some of the information asked for is necessary to ensure the readouts are correct. You will be asked for your Age and Weight. Entering your Age is necessary during the Heart Rate control program to ensure the correct settings are entered in the program; entering your Weight aides in calculating a correct Calorie reading. Although we cannot provide an exact calorie count, we do want to be as close as possible. A message about Calories: Calorie readings on every piece of exercise equipment, whether it is in a gym or at home, are not accurate and tend to vary widely. They are meant only as a guide to monitor your progress from workout to workout. The only way to accurately measure your calorie burn is in a clinical setting connected to a host of machines. This is because every person is different and burns calories at a different rate. ENTERING A PROGRAM AND CHANGING SETTINGS Press each program button to scroll through the program selections. The profile for each program will be displayed in the dot matrix window. This model will also show the incline profile when the Display key is pressed. Press the Enter key to select a program and begin customizing the settings. If you want to work out without entering new settings, just press the Start key. This will bypass the programming of data and take you directly to the start of your workout. If you want to change the personal settings, then just follow the instructions in the Message Window. If you start a program without changing the settings, the default settings will be used.Note: Age and Weight default settings will change when you enter a new number. So the last Age and Weight entered will be saved as the new default settings. If you enter Age and Weight for the first time, you will not have to enter it every time you work out unless either Age or Weight has changed or if someone else enters a different Age and Weight.Charge Portable Devices with USB portUSB Port Charging function: Charge your personal device during your workout using the fitness equipment’s on-console USB port. To charge your mobile electronics make sure the fitness equipment power is on.Step 1: Connect your USB charging cable (not included) to the USB Power Port and to your device.Step 2: Check to make sure your device icon indicates it is charging.NOTE * USB charging cable is not included; make sure compatible USB charging cable is being used. ** Your device “charging” icon may or may not indicate it is charging. Depending on the amount of current your particular device requires for charging, the icon may not be on, but your device is still charging, but possibly at a lower charge rate. ***The USB port on the console is capable of powering USB devices. It provides up to 5Vdc/0.5 amp of power and meets USB 2.0 regulations. You will not be able to save your workout data to a USB via this port; it is used for charging purposes only.

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

Sole App to be used in conjunction with select Apple & Android devices!In order to help you achieve your exercise goals, Sole has added an exciting new feature to this product. Your new exercise machine comes equipped with a Bluetooth® transceiver that will allow it to interact with selected phones or tablet computers via the Sole Fitness App.Just download the free Sole Fitness App from the Apple Store or Google Play, and follow the instructions in the App to sync with your exercise machine. This allows you to view current workout data on three different Display screens on your device. You can easily switch back and forth from the workout display view to the internet/social media/email sites via icons on the display screen. When your workout is finished, the data is automatically saved to the built-in personal calendar for future reference.Our new Sole Fitness App also allows you to sync your workout data to one of many fitness cloud sites we support: iHealth, MapMyFitness, Record or Fitbit.Syncing the App with your exercise machine:After downloading the App, make sure Bluetooth® is enabled on your device, then tap the icon in the top left corner to search for Sole equipment.

After the equipment is detected, tap Connect. When the App and equipment are synced, the Bluetooth® icon on the equipment’s console will light up. You may now start using your new Sole product!If the elliptical is not connected to the app, the console will display “SYNC” when the workout is over. You can then connect using your phone or tablet to store workout data in the App. The console can only store the last workout data. When the elliptical returns to IDLE MODE, workout data will be erased.*Note: Your device will need to run on a minimum operating system of iOS 7 or Android 4.4 or above for the Sole Fitness App to operate properly.

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

The exercise equipment’s Bluetooth device (BLE 4.0) can also be connected to the Bluetooth wireless heart rate chest strap transmitter (BLE 4.0). The chest strap transmitter can receive signals even when the App is already in use. In order to do such a functional switch, you need to use the heart rate key on the keyboard. Take the following steps to achieve this:1. In idle mode, the heart rate Bluetooth LED on the keypad will not be lit if the Bluetooth function is currently connected with the App.2. In idle mode, press the heart rate key on the keyboard. The Bluetooth LED will light on. This shows that the Bluetooth function is now switched to connect to the Bluetooth wireless heart rate chest strap. You can wear the Bluetooth wireless heart rate chest strap first, then commence connection. While in connection, the console will show heart rate value via Bluetooth.3. When the workout is over, the console will automatically switch its Bluetooth connection back to the previously connected App.The exercise equipment can also play music wirelessly via Bluetooth. Turn on your mobile phone or tablet’s Bluetooth function. Search for the name “Bt-speaker” in your device’s Bluetooth menu. Tap to connect. Now your device can transmit music to the exercise equipment.

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

PROGRAMMABLE FEATURESMANUAL PROGRAM The Manual program works, as the name implies, manually. This means that you control the workload yourself and not the computer.1. Press the Manual program button, then press the Enter key. 2. The Message Window will ask you to enter your Age. You mayadjust the age setting using the Level / keys, then press the Enter key to accept the new number and proceed on to the next screen. 3. You are now asked to enter your Weight. You may adjust your weight setting using the Level / keys; then press Enter to continue. 4. Next is the Time. You may adjust the length of Time by pressing the keys, then press Enter to continue. 5. Now you are finished editing the settings and can begin your workout by pressing the Start key. You can also go back and modify your settings by pressing the Stop key to go back to one level of the programming screen. 6. Once the program starts, the elliptical will be set to level one. This is the easiest level, and it is a good idea to stay at level one for a while to warm up. If you want to increase the workload at any time, press the Level key; the Level key will decrease the workload. 7. During the Manual program, you will be able to scroll through the data in the Message Window by pressing the Display key. 8. When the program ends, the Message Window will show a summary of your workout. The summary will be displayed for a short time then the console will return to the startup display.

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

PRESET PROGRAMS

These ellipticals have five different programs that have been designed for a variety of workouts. These five

programs have factory preset work level profiles for achieving different goals.

Hill

The Hill program simulates going up and down a hill. The resistance in the pedals will steadily increase and

then decrease during the program.

WORK

INCLINE

Fat Burn

The Fat Burn program is designed, as the name implies, to maximize the burning of fat. There are many

schools of thought on the best way to burn fat, but most experts agree that a lower exertion level that stays

at a steady workload is the best. The absolute best way to burn fat is to keep your heart rate at around 60%

to 70% of its maximum potential. This program does not use heart rate but simulates a lower, steady

exertion workout.

WORK

INCLINE

Cardio

The Cardio program is designed to increase your cardiovascular function and endurance. This is an exercise

for your heart and lungs. It will build up your heart muscle and increase blood flow and lung capacity. This is

achieved by incorporating a higher level of exertion with slight fluctuations in work.

WORK

INCLINE

Strength

The Strength program is designed to increase muscular strength in your lower body. This program will

steadily increase in resistance to a high level and forces you to sustain it. This is designed to strengthen and

tone your legs and glutes (muscles of the butt).

WORK

INCLINE

HIIT

The HIIT program takes you through high levels of intensity followed by periods of low intensity. This

program increases your endurance by depleting your oxygen level, followed by periods of recovery to

replenish oxygen. Your cardiovascular system gets programmed to use oxygen more efficiently this way.

This program also forces your body to become more efficient due to spikes in heart rate between recovery

periods. This aids in heart rate recovery from intense activities.

WORK

INCLINE

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

PROGRAMMING PRESET WORKOUTS1. Press the desired program button, then press the Enter key. 2. The Message Window will ask you to enter your Age. You may adjust theage setting using the Level / keys, then press the Enter key to accept the new number and proceed on to the next screen. 3. You are now asked to enter your Weight. You may adjust the weight number using the Level / keys; then press Enter to continue. 4. Next is Time. You may adjust the Time and press Enter to continue. 5. Now you are asked to adjust the Max Level. This is the peak exertion level you will experience during the program (the highest coloured segment/box of the program profile). Adjust the level and then press Enter. 6. Now you are finished editing the settings and can begin your workout by pressing the Start key. You can also go back and modify your settings by pressing the Stop key to go back one level or screen. 7. If you want to increase or decrease the resistance or incline at any time during the program, press the Level / keys. 8. During the program, you will be able to scroll through the data in the Message Window by pressing the Display key. Press the Enter key to switch Dot Matrix from work to incline profile. 9. When the program ends, the Message Window will show a summary of your workout. The summary will be displayed for a short time then the console will return to the start-up display.CUSTOM USER DEFINED PROGRAMS The customizable User programs allow you to build and save your own workout. You can build your own custom program by following the instructions below. 1. Select the User program (U1 or U2), then press Enter. If you have already saved a program to either U1 or U2, itwill be displayed, and you are ready to begin. If not, you will have the option of inputting a username. In the Message Window, the letter “A” will be blinking. Use the /Level buttons to select the appropriate first letter of your name (pressing the Level / button will switch to the letter “B”; pressing the Down button will switch to the letter “Z”). Press Enter when the desired letter is displayed. Repeat this process until all of the characters of your name have been programmed (maximum 7 characters). When finished, press Stop. 2. If there is a program already stored in User, when you press the key, you will have an option to run the program as it is or delete the program and build a new one. At the welcome message screen, when pressing Start or Enter, you will be prompted: Run Program? Use the Level / to select Yes or No. If you select No, you will then be asked if you want to delete the currently saved program. It is necessary to delete the current program if you want to build a new one. 3. The Message Window will ask you to enter your Age. You may enter your age using the Level /keys, then press the Enter key to accept the new number and proceed on to the next screen. 4. You are now asked to enter your Weight. You may adjust the weight number using the Level / keys; then press Enter to continue. 5. Next is Time. You may adjust the Time using the Level /keys and press Enter to continue. 6. Now the first column will be blinking, and you are asked to adjust the level for the first segment of the workout. When you finish adjusting the first segment, or if you don’t want to change, then press Enter to continue to the next segment. The next segment will show the same level as the previously adjusted segment. Repeat the same process as the last segment, then press Enter. Continue this process until eighteen all segments have been set. 7. Now the first column will be blinking again, and you are asked to adjust the Incline level for the first segment of the workout. Follow the same procedure for building the Incline profile as you did for the resistance profile. 8. The Message Window will then tell you to start to begin (and save the program) or Enter to modify the program. Pressing Stop to go back one level. 9. If you want to increase or decrease the workload at any time during the program, press the Incline or Level /key. This will only affect the Incline or Level for the present column in the profile. When the profile changes to the next column, it will return to the preset work level. 10. During the User 1 or User 2 program, you will be able to scroll through the data in the Message Window by pressing the Display key. Press the Enter key to switch Dot Matrix from work to incline profile. 11. When the program ends, the Message Window will show a summary of your workout. The summary will be displayed for a short time then the console will return to the start-up display.

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

HEART RATE PROGRAMSBefore we get started, a word about Heart Rate: The old motto, “no pain, no gain,”is a myth that has been overpowered by the benefits of exercising comfortably. A great deal of this success has been promoted by the use of heart rate monitors. With the proper use of a heart rate monitor, many people find that their usual choice of exercise intensity was either too high or too low, and exercise is much more enjoyable by maintaining their heart rate in the desired benefit range.To determine the benefits range in which you wish to train, you must first determine your Maximum Heart Rate. This can be accomplished by using the following formula: 220 minus your age. This will give you the Maximum Heart Rate (MHR)for someone of your age. To determine the effective heart rate range for specific goals, you simply calculate a percentage of your MHR. Your Heart rate training zone is 50% to 90% of your maximum heart rate. 60% of your MHR is the zone that burns fat, while 80% is for strengthening the cardiovascular system. This 60% to 80% is the zone to stay in for maximum benefit.For someone who is 40 years old their target heart rate zone is calculated:220 40 = 180 (maximum heart rate) 180 x .6 = 108 beats per minute(60% of maximum) 180 X .8 = 144 beats per minute(80% of maximum)So for a 40-year-old, the training zone would be 108 to 144 beats per minute.If you enter your age during programming, the console will perform this calculation automatically. Entering your age is used for the Heart Rate programs. After calculating your MHR, you can decide upon which goal you would like to pursue.The two most popular reasons for, or goals, of exercise, are cardiovascular fitness (training for the heart and lungs) and weight control. The black columns on the chart above represent the MHR for a person whose age is listed at the bottom of each column. The training heart rate, for either cardiovascular fitness or weight loss, is represented by two different lines that cut diagonally through the chart. A definition of the lines’ goal is in the bottom left-hand corner of the chart. If your goal is cardiovascular fitness or if it is weight loss, it can be achieved by training at 80% or 60%, respectively, of your MHR on a schedule approved by your physician. Consult your physician before participating in any exercise program.With all SOLE Heart Rate ellipticals, you may use the heart rate monitor feature without using the Heart Rate program. This function can be used during manual mode or during any of the nine different programs. The Heart Rate program automatically controls resistance at the pedals.

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

RATE OF PERCEIVED EXERTIONHeart rate is important but listening to your body also has a lot of advantages. There are more variables involved in how hard you should workout than just heart rate. Your stress level, physical health, emotional health, temperature, humidity, the time of day, the last time you ate and what you ate all contribute to the intensity at which you should workout. If you listen to your body, it will tell you all of these things. The rate of perceived exertion (RPE), also known as the Borg scale, was developed by Swedish physiologist G.A.V. Borg. This scale rates exercise intensity from 6 to 20 depending upon how you feel or the perception of your effort.The scale is as follows: RatingPerception of Effort6 Minimal 7 Very, very light 8 Very, very light + 9 Very light 10 Very light + 11 Fairly light 12 Comfortable 13 Somewhat hard 14 Somewhat hard + 15 Hard 16 Hard + 17 Very hard 18 Very hard + 19 Very, very hard 20 MaximalYou can get an approximate heart rate level for each rating by simply adding a zero to each rating. For example, a rating of 12 will result in an approximate heart rate of 120 beats per minute. Your RPE will vary depending on the factors discussed earlier. That is the major benefit of this type of training. If your body is strong and rested, you will feel strong, and your pace will feel easier. When your body is in this condition, you are able to train harder, and the RPE will support this. If you are feeling tired and sluggish, it is because your body needs a break. In this condition, your pace will feel harder. Again, this will show up in your RPE, and you will train at the proper level for that day.

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

USING HEART RATE TRANSMITTERHow to wear your wireless chest strap transmitter:1. Attach the transmitter to the elastic strap using the locking parts. 2. Adjust the strap as tightly as possible as long as the strap is not too tight toremain comfortable. 3. Position the transmitter with the SOLE logo centred in the middle of your bodyfacing away from your chest (some people must position the transmitter slightly left of center). Attach the final end of the elastic strap by inserting the round end and, using the locking parts, secure the transmitter and strap around your chest. 4. Position the transmitter immediately below the pectoral muscles.5. Sweat is the best conductor to measure very minute heartbeat electrical signals. However, plain water can also be used to pre-wet the electrodes (2 ribbed oval areas on the reverse side of the belt and both sides of the transmitter). It’s also recommended that you wear the transmitter strap a few minutes before your workout. Some users, because of body chemistry, have a more difficult time in achieving a strong, steady signal at the beginning. After “warming up,”this problem lessens. As noted, wearing clothing over the transmitter/strap doesn’t affect performance.6. Your workout must be within range – the distance between transmitter/receiver to achieve a strong, steady signal. The length of the range may vary somewhat but generally stay close enough to the console to maintain good, strong, reliable readings. Wearing the transmitter immediately against bare skin assures you of proper operation. If you wish, you may wear the transmitter over a shirt. To do so, moisten the areas of the shirt that the electrodes will rest upon.Note: The transmitter is automatically activated when it detects activity from the user’s heart. Additionally, it automatically deactivates when it does not receive any activity. Although the transmitter is water resistant, moisture can have the effect of creating false signals, so you should take precautions to completely dry the transmitter after use to prolong battery life (estimated transmitter battery life is 2500 hours). The replacement battery is Panasonic CR2032.ERRATIC OPERATIONCaution! Do not use this elliptical for Heart Rate unless a steady, solid Actual Heart Rate value is being displayed. High, wild, random numbers being displayed indicate a problem.Areas to look for interference that may cause erratic heart rate:1. Microwave ovens, TVs, small appliances, etc. 2. Fluorescent lights. 3. Some household security systems. 4. Perimeter fence for a pet. 5. Some people have problems with the transmitter picking up a signal from their skin. Ifyou have problems, try wearing the transmitter upside down. Normally the transmitter will be oriented, so the SOLE logo is right side up. 6. The antenna that picks up your heart rate is very sensitive. If there is an outside noise source, turning the whole machine 90 degrees may de-tune the interference. 7. Another Individual wearing a transmitter within 3′ of your machine’s console.If you continue to experience problems, contact your dealer.

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

HEART RATE PROGRAM OPERATIONBoth programs operate the same; the only difference is that the default for HR1 is set to 60%, and HR2 is set to 80% of the maximum heart rate. They both are programmed the same way.To start an HR program, follow the instructions below or just select the HR1 or HR2 program, then press the Enter button and follow the directions in the Message Window.1. Press the HR1 or HR2 key, then press the Enter key. 2. The Message Window will ask you to enter your Age. You may enter your Age, using theLevel / keys, then press the Enter key to accept the new number and proceed on to the next screen. 3. You are now asked to enter your Weight. You may adjust the Weight number using the Level / keys or the numeric keypad; then press Enter to continue. 4. Next is Time. You may adjust the Time and press Enter to continue. 5. Now you are asked to adjust your Target Heart Rate. This is the heart rate level you will strive to reach and maintain during the program. Adjust the level and then press Enter. 6. Now you are finished editing the settings and can begin your workout by pressing the Start key. You can also go back and modify your settings by pressing the Enter key. Note: At any time during the editing of Data, you can press the Stop key to go back one level or screen. 7. If you want to increase or decrease the workload at any time during the program, press the Level / keys. This will allow you to change your Target Heart Rate at any time during the program. 8. During the HR1 or HR2 programs, you will be able to scroll through the data in the Message Window by pressing the adjacent Display key. 9. When the program ends, you may press Start to begin the same program again or Stop to exit the program

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

GENERAL MAINTENANCE1. Wipe down all areas in the sweat path with a damp cloth after each workout. 2. If a squeak, thump, clicking, or rough feeling develops, the main cause is most likely one of two reasons:I. The hardware was not sufficiently tightened during assembly. All bolts that were installed during assembly need to be tightened as much as possible. It may be necessary to use a larger wrench than the one provided if you cannot tighten the bolts sufficiently. I cannot stress this point enough; 90% of calls to the service department for noise issues can be traced to loose hardware or the rear rails being dirty.II. Dirt build-up on the rear rails and polyurethane wheels are also a source of the noise. Noise from buildup on the rails can cause a thumping sound that you would swear is coming from inside the main body of the machine because noise travels and is amplified in the tubing of the frame. Clean the rails and wheels with a lint-free cloth and rubbing alcohol. Stubborn build-up can be removed with your thumbnail or a non-metallic scraper, like the back edge of a plastic knife. After cleaning, apply a small amount of lubricant on the rails with your fingers or a lint-free cloth. You only need a thin coat of lubrication; wipe off any excess.3. If squeaks or other noises persist, check that the unit is properly levelled before calling the service department.MAINTENANCE MENU IN CONSOLE SOFTWARE The console has built-in maintenance/diagnostic software. The software will allow you to change the console settings from English to Metric and turn off the beeping of the speaker when a key is pressed, for example. To enter the Maintenance Menu (may be called Engineering Mode, depending on the version), press and hold down the Start, Stop and Enter keys; keep holding the keys down for about 5 seconds, and the Message Window will display”Engineering Mode.”Press the Enter button to access the menu below. Press the Level / keys to navigate the menu.A. Key Test – Will allow you to test all the keys to make sure they are functioning B. Display Test – Automatically tests all LCD’s C. Functions – Press Enter to access settings, use Level / keys to scrollI. ODO Reset – Resets the odometer II. Units – Choose from English (Imperial) or Metric display readings III. Display Mode – Turn off to have the console power down automatically after 30 minutes of inactivity IV. Motor Test – Continually runs the tensioning gear motor V. Manual – Allows stepping of the gear motor VI. Pause Mode – Turn on to allow 5 minutes of pause, turn off to have console pause indefinitely VII. Key Tone – Turn on or off the beep sound when a key is pressedD. Security – Allows you to lock the keypad, so no unauthorized use of the machine is allowed. When the child lock is enabled, the console will not allow the keypad to operate unless you press and hold the Start and Enter buttons for 3 seconds to unlock the console.E. Factory Set F. Exit – Select to exit Maintenance MenuIncline Calibration: If there is a problem with the incline, try running the calibration. Press the Incline key and the Start key at the same time. Hold them down for 5 seconds and then press Start to begin the calibration. If theproblem persists, contact the service department.

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

EXPLODED VIEW DIAGRAM

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

PARTS LIST

Key

Part

Part Description

Q’ty

9002501 Main Frame

9002502 Incline Rail Assembly

9002503 Console Holder Assembly

9002504 Cross Bar

9002505 Bushing Housing, Pedal Arm

9002506 Pedal Arm(L)

9002507 Pedal Arm(R)

9002508 Connecting Arm (L)

9002509 Connecting Arm (R)

9002510 Handlebar (L)

9002511 Handlebar (R)

9002512 Console Mast

9002513 Idler Bracket

9002514 Crank Axle

9002517 Rear Rail Assembly

9002518 Locking Tube Assembly

9002521 Cover Holder

9002522 Controller Back Plate

9002524 Rod End Sleeve

9002525 Axle for Pedal

9002527 Aluminum Rail

9002528 6005_Bearing

28-1

9002528-1 6005-2RS_Bearing

9002529 6003_Bearing

9002530 6203_Bearing

9002531 Rod End Bearing

9002532 Belt

9002533 Flywheel

9002534 Magnet

9002535 360m/m_Steel Cable

9002536 INCLINE_Handgrip Resistance Label

9002537 LEVEL_Handgrip Resistance Label

9002539 Handgrip Foam

9002540 Console Assembly

9002541 300m/m_Connecting Wire (Red)

9002542 550m/m__Computer Cable

9002543 900m/m_Connecing Wire, Incline Motor Power Cord

9002544 850m/m_Connecting Wire, Incline Motor

9002545 1550m/m_Computer Cable

9002546 AC Electronic Module

9002547 80m/m_Connecting Wire (White)

9002548 200m/m_Ground Wire

9002549 Gear Motor

9002550 500m/m_Sensor W/Cable

9002551 Incline Motor

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

Key52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 72 73 74 77 78 79 81 82 83 84 86 88 90 91 92 93 94 95 95-1 96 97 98 99 102 103 104 104-1

Part 9002552 9002553 9002554 9002555 9002556 9002557 9002558 9002559 9002560 9002561 9002562 9002563 9002564 9002565 9002566 9002567 9002568 9002569 9002570 9002572 9002573 9002574 9002577 9002578 9002579 9002581 9002582 9002583 9002584 9002586 9002588 9002590 9002591 9002592 9002593 9002594 9002595 9002595-1 9002596 9002597 9002598 9002599 90025102 90025103 90025104 90025104-1

Part Description 850m/m_Handpulse Assembly (Red) 850m/m_Handpulse Assembly (White) Handgrip Resistance Button W/Cable 450m/m_Handle Wire (Upper), Resistance 450m/m_Handle Wire (Upper), Incline 900m/m_Handle Wire, Resistance/Incline Power Cord Incline Controller Incline Adaptor 400m/m_Audio Cable Chest Strap 250m/m_Ground Wire Oval End Cap Switch Wire Cap Round Cap(32×2.5T) Round Cap(Ø32×1.8T) Ø62_Transportation Wheel Ø78_Slide Wheel , Urethane WFM252821_Bushing Ø38 × Ø34 × Ø26 × 4+16T_Bushing Upright Bushing Drive Pulley Ø25 × Ø25 ×15T_Rubber Foot Pad Button Head Plug Ø35 × 10_Rubber Foot Spacer Bushing 3/8” × Ø35 × 5T_Nylon Washer Ø5/16″ × 25 × 3T_Nylon Washer Ø25 × 25_Rubber Foot Pad Ø25.5 × 33.5 × 1.5T_Nylon Wave Washer Handle Switch Bracket Pedal Arm Cover (L) Pedal Arm Cover (R) Connecting Arm Cover (L) Connecting Arm Cover (R) Slide Wheel Cover Console Mast Cover (L) Console Mast Cover (R) Side Case (L) Side Case (R) Round Disk Round Disk Cover Pedal (L) Pedal (R) Tablet Holder (Bottom) Tablet Holder Adjustable Clip

Customer service 1-888-707-1880

Email:

Q’ty1 1 2 1 1 2 1 1 1 1 1 1 2 2 6 2 2 4 4 2 2 1 3 4 4 1 2 2 1 2 2 1 1 2 2 2 1 1 1 1 2 2 1 1 1 1E25 ELLIPTICAL

Key104-2 105 106 107 108 109 110 111 112 113 114 115 116 119 120 121 122 124 125 128 129 130 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 153 154 155 156

Part 90025104-2 90025105 90025106 90025107 90025108 90025109 90025110 90025111 90025112 90025113 90025114 90025115 90025116 90025119 90025120 90025121 90025122 90025124 90025125 90025128 90025129 90025130 90025132 90025133 90025134 90025135 90025136 90025137 90025138 90025139 90025140 90025141 90025142 90025143 90025144 90025145 90025146 90025147 90025148 90025149 90025150 90025151 90025153 90025154 90025155 90025156

Part Description Tablet Holder (Front) Bottle Holder Front Handlebar Cover (L) Rear Handlebar Cover (L) Front Handlebar Cover (R) Rear Handlebar Cover (R) Front Stabilizer Cover Incline Bottom Cover Incline Cover Inclinable Rail Cover Rear Bar Cover Middle Stabilizer Cover (L) Middle Stabilizer Cover (R) 1/4″ × UNC20 × 3/4″_Hex Head Bolt 5/16″ × UNC18 × 15m/m_Hex Head Bolt 5/16″ × 1″_Hex Head Bolt 5/16″ × 1-1/4″_Hex Head Bolt 5/16″ × 2-1/4″_Hex Head Bolt 5/16″ × 2-1/2″_Hex Head Bolt 3/8″ × UNC16 × 1-1/2″_Hex Head Bolt 3/8″ × 3/4″_Socket Head Cap Bolt 3/8″ × 2-1/2″_Hex Head Bolt M10 × 130m/m_Hex Head Bolt 3/8″ × 2-1/4″_Socket Head Cap Bolt M8 × 1.25 × 40m/m_Socket Head Cap Bolt 3/8″ × 2″_Flat Head Socket Bolt 5/16″ × 2″_Button Head Socket Bolt M4 × 12m/m_Phillips Head Screw M5 × 15m/m_Phillips Head Screw M5 × 10m/m_Phillips Head Screw M5 × 10m/m Phillips Head Screw 5 × 16m/m_Tapping Screw 5 × 19m/m_Tapping Screw 5 × 16m/m_Tapping Screw 3.5 × 16m/m_Sheet Metal Screw 3.5 × 12m/m_Sheet Metal Screw M6 × 10m/m_Phillips Head Screw 3 × 20m/m_Tapping Screw M5 × 15m/m_Flat Head Socket Screw 3.5 × 16m/m_Tapping Screw Ø25_C Ring Ø17_C Ring M4 × P0.7 × 5T_Nylon Nut 1/4″ × 8T_Nylon Nut 5/16″ × 7T_Nylon Nut M8 × 7T_Nylon Nut

Customer service 1-888-707-1880

Email:

Q’ty1 1 1 1 1 1 1 1 1 1 1 1 1 4 10 2 2 4 1 2 4 1 1 2 2 4 2 2 20 8 22 16 11 10 10 20 4 4 4 1 2 5 2 4 5 1E25 ELLIPTICAL

Key

Part

Part Description

Q’ty

157

90025157 M8 × 9T_Nylon Nut

158

90025158 3/8″ × 7T_Nylon Nut

159

90025159 3/8″ × 11T_Nylon Nut

160

90025160 M10 × 8T_Nylon Nut

161

90025161 3/8″ × UNF26 × 4T_Luck Nut

162

90025162 3/8″ × UNF26 × 11T_Nut

163

90025163 3/8″ × 7T_Luck Nut

164

90025164 M8 × 6.3T_Luck Nut

165

90025165 Ø1/4″ × 19_Flat Washer

166

90025166 Ø5/16″ × Ø20 × 1.5T_Flat Washer

167

90025167 Ø5/16″ × Ø23 × 1.5T_Flat Washer

169

90025169 Ø5/16″ × Ø35 × 2.0T_Flat Washer

171

90025171 Ø3/8″ × Ø19 × 1.5T_Flat Washer

172

90025172 Ø17 × Ø23.5 × 1.0T_Flat Washer

174

90025174 Ø25_Wave Washer

175

90025175 Ø10 × 2T_Split Washer

176

90025176 Ø8 × 1.5T_Split Washer

177

90025177 Ø5/16″_Star Washer

180

90025180 M8 × 170m/m_J Bolt

181

90025181 M8 × 20m/m_Carriage Bolt

182

90025182 7 × 7 × 25m/m_Woodruff Key

186

90025186 13/14m/m_Wrench

187

90025187 Short Phillips Head Screwdriver

188

90025188 Phillips Head Screwdriver

189

90025189 12/14m/m_Wrench

190

90025190 Ø17× 0.5T_Wave Washer

194

90025194 Ø38 × Ø8.5 × 4T_Flat Washer

196

90025196 Ø5/16″ × Ø23 × 3T_Flat Washer

197

90025197 L Allen Wrench

198

90025198 Ø17 × Ø23 × 1.1T_Spacer Bushing

219

90025219 Protection Cap

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

MANUFACTURER’S LIMITED WARRANTY

ELLIPTICAL WARRANTY

Dyaco Canada Inc. warrants all its Sole elliptical parts, for a period of time listed below, from the date of retail sale. Dyaco Canada Inc.’s

responsibilities include providing new or remanufactured parts at Dyaco Canada Inc.’s option and technical support to our independent

dealers and servicing organizations. In the absence of a dealer or service organization, these warranties will be administered by Dyaco

Canada Inc. directly to a consumer. The warranty period applies to the following components:

Labour / Frame Weldments / Brake

1 Year / Lifetime / 3 Years

Cosmetic Items*

90 Days

All Other Components

3 Years

* Cosmetic items including, but not limited to the following: grips, console overlays, and labels/decals.

NORMAL RESPONSIBILITIES OF THE CONSUMER

This warranty applies only to products in ordinary household use, and the consumer is responsible for the items listed below:

1. The warranty registration can be completed online: Go to www.dyaco.ca/warranty.html and complete the online warranty registration 2. Proper use of the elliptical in accordance with the instructions provided in this manual. 3. Proper installation in accordance with instructions provided with the elliptical and with all local electric codes.

4. Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose connections or

defects in house wiring.

5. Expenses for making the elliptical accessible for servicing, including any item that was not part of the elliptical at the time it was

shipped from the factory.

6. Damages to the elliptical finish during shipping, installation or following installation. 7. Routine maintenance of this unit as specified in this manual.

EXCLUSIONSThis warranty does not cover the following: 1. CONSEQUENTIAL, COLLATERAL, OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTINGFROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY. Note: Some areas do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you. 2. Service call reimbursement to the consumer. Service call reimbursement to the dealer that does not involve malfunction or defects in workmanship or material, for units that are beyond the warranty period, for units that are beyond the service call reimbursement period, for elliptical not requiring component replacement, or elliptical not in ordinary household use. 3. Damages caused by services performed by persons other than authorized Dyaco Canada Inc. service companies; use of parts other than original Dyaco Canada Inc. parts; or external causes such as corrosion, discoloration of paint or plastic, alterations, modifications, abuse, misuse, accident, improper maintenance, inadequate power supply, or acts of God. 4. Products with original serial numbers that have been removed or altered. 5. Products that have been: sold, transferred, bartered, or given to a third party. 6. Products that do not have a warranty registration card on file at Dyaco Canada Inc. Dyaco Canada Inc. reserves the right to request proof of purchase if no warranty record exists for the product. 7. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE. 8. Product used in any environment other than a residential setting. 9. Warranties outside of North America may vary. Please contact your local dealer for details.

SERVICEKeep your bill of sale. The labour warranty period is twelve (12) months from the date on the bill of sale. If service is performed, it is in your best interest to obtain and keep all receipts. This written warranty gives you specific legal rights. You may also have other rights that vary in different areas. Service under this warranty must be obtained by following these steps, order: 1. Contact your selling authorized SOLE dealer. 2. If you have any questions about your new product or questions about the warranty, contact Dyaco Canada Inc. at 1-888-707-1880. 3. If no local service is available, Dyaco Canada Inc. will repair or replace the parts, at Dyaco Canada Inc.’s option, within the warrantyperiod at no charge for parts. All transportation costs, both to our factory and upon return to the owner, are the responsibility of the owner. The owner is responsible for adequate packaging upon return to Dyaco Canada Inc. Dyaco Canada Inc. is not responsible for damages that occur during shipping. Make all freight damage claims with the appropriate freight carrier. DO NOT SHIP ANY UNIT TO OUR FACTORY WITHOUT A RETURN AUTHORIZATION NUMBER. All units arriving without a return authorization number will be refused. 4. For any further information, or to contact our service department by mail, send your correspondence to:

Dyaco Canada Inc. 5955 Don Murie Street Niagara Falls, ON L2G 0A9 Product features or specifications as described or illustrated are subject to change without notice. All warranties are made by Dyaco Canada Inc.

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

Customer service 1-888-707-1880

Email:

E25 ELLIPTICAL

References

Warranty Registration through Dyaco Canada Inc.

[xyz-ips snippet=”download-snippet”]

Posted

2023-01-20

Sole

admin

Tags:

_pdf, 16608900250, E25 ELLIPTICAL, Sole