Sonicmodell Twin Multirole FPV Platform Assembly Instruction Manual
Specifications:
Wingspan: 1200mm (47.24″)Length: 953mm (37.52″)Meterail: High Quality EPORecommended Optimized Power ComboMotor: 2212-1100KV * 2Servos: 9g metal gear * 6Prop: 3-blade 8*4.5*2Recommended Battery: 4S 3000-540mAh
Installation
Install the servos for the Ailerons and (optional) Flaps.All the accessories for that matter are provided with the KIT. In case you have purchased the DUSK LED System, this is a good time also to install the wing lights.Once you’re done, close the motor housing and glue the light protection in place.
Install the servos for the Elevator and Rudder. You can dry-fit all the distances placing your Vertical and Horizontal Stabilizer without glue. Once you’re happy, screw your servos in place and glue the plastic servo protection like is shown in the picture.
Glue your Vertical and Horizontal Stabilizers in place. Be sure they’re aligned 90 degrees from each other. This is a good time to install the Tail light in case you have the DUSK LED System.Connect your pushrods to the servo horns, checking that every thing is nice and tight.
Finally, you can attach your wings to the fuselage, and install the rest of your equipment as you please, along the fuselage or on the main wings: FPV gear, Battery, Receivers, etc.
Optimized Power Combo
DUSK LED Lighting System
Modular Landing Gear
Plastic Belly Protection
Servo Pack (9g x 2)
3-Blade 8*4.5 Prop x 2
Mapping Camera Bay (camera is not included)
CHECKING YOUR CONTROL SURFACES:
FLAPS: We recommend you to use a 3-position switch for the Flaps. Check your radio MIXES documentation for this matter.
Sonicmodell Twin Multirole FPV Platform Assembly Instruction Manual – Sonicmodell Twin Multirole FPV Platform Assembly Instruction Manual –
[xyz-ips snippet=”download-snippet”]