Sonoff Dual R2 2-Gang Wi-Fi Smart Switch Instruction Manual

DIY DUALR2User manual V1.0

2-Gang Wi-Fi Smart Switch

Operating Instruction

1. Power off
2. Wiring InstructionMake sure the neutral wire and live wire connection is correct. 
3. Download APPhttp://app.coolkit.cc/dl.html
4. Power onAfter powering on, the device will enter the quick pairing mode (Touch) during the first use. The Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.The device will exit the quick pairing mode (Touch) if not paired within 3mins. If you want to enter this mode, please long press the manual button for about Ss until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.
5. Add the device

Tap “+” and select “Quick Pairing”, then operate following the prompt on the APP.

Compatible Pairing Mode

If you fail to enter Quick Pairing Mode (Touch), please try “Compatible Pairing Mode” to pair.1) Long press the Pairing button for 5s until the Wi-Fi LED Indicator changes in a cycle of two short flashes and one long flash and release. Long press the Pairing button for 5s again until the Wi-Fi LED indicator flashes quickly. Then, the device enters Compatible Pairing Mode.

2) Tap “+” and select” Compatible Pairing Mode” on APP. Select Wi-Fi SSID with ITEAD-****** and enter the password 12345678, and then go back to eWeLink APP and tap “Next”. Be patient until pairing completes.

Specifications

Product Introduction

The device weight is less than t kg. The installation height of less than 2 m is recommended.

Wi-Fi LED indicator status instruction

Features

	Remote Control		Interlock
	Single/Countdown Timing		Inching Mode
	Voice Control		Camera Linking
	Share Control		Power-on State
	Smart Scene		LAN Control

Switch Network

If you need to change the network, long-press the pairing button for Ss until the Wi-H LED indicator changes in a cycle of two short and one long flash and release, then the device enters quick pairing mode and you can pair again.

Factory Reset

Deleting the device on the eWeLink app indicates you restore it to the factory setting.

Common Problems

Q: Why does my device stay “Offline”? A: The newly added device needs 1 – 2mins to connect to Wi-Fi and network. If it stays offline for a long time, please judge these problems by the blue Wi-Fi indicator status:

1. The blue Wi-Fi Indicator quickly flashes once per second, which means that the switch failed to connect your Wi-Fi:1) Maybe you have entered the wrong Wi-Fi password.2) Maybe there’s too much distance between the switch your router or the environment causes interference, consider getting close to the router. If failed, please add it again.3)The SG Wi-Fi network is not supported and only supports the 2.46Hz wireless network.4) Maybe the MAC address filtering is open. Please turn it off. If none of the above methods solved the problem, you can open the mobile data network on your phone to create a Wi-Fi hotspot, then add the device again.
2. Blue indicator quickly flashes twice per second, which means your device has connected to Wi-Fi but failed to connect to the server. Ensure a steady enough network. If double flash occurs frequently, which means you access an unsteady network, not a product problem. If the network is normal, try to turn off the power to restart the switch.

FCC Warning

Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:— Reorient or relocate the receiving antenna.— Increase the separation between the equipment and receiver.— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.— Consult the dealer or an experienced radio/TV technician for help.

report this ad

SONOFF TECHNOLOGIES CO., LTD.

Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type DUALR2 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:https://sonoff.tech/usermanuals

Shenzhen Sonoff Technologies Co., Ltd.1001, BLDG8, Lianhua Industrial Park, Shenzhen, GD, ChinaZIP code: 518000 Website: sonoff.tech MADE IN CHINA