OLED TV
Dismantling Information forUse by Professional Recyclers
ORIGINAL MANUAL ISSUE DATE: 2021.04
Model: XR-55A80J XR-55A83J XR-55A84J
XR-65A80JXR-65A83J XR-65A84J
XR-77A80JXR-77A83J XR-77A84J
Conditions of Use: (1) Please use this information only for the purpose of performing repair and recycling Sony products. Using this informationfor any purpose other than the purpose described foregoing is forbidden. (2) Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this information in whole or in partwithout the prior written permission of the author.Revision of Information: This information may be changed or updated at any time without any prior notice. Please confirm that this information is up-todate before using it.
9-888-795-42OLED TVSony EMCS (M) Sdn. Bhd., SHES-M © 2021.04
ModelXR-55A80J XR-55A83J XR-55A84JXR-65A80J XR-65A83J XR-65A84JXR-77A80J XR-77A83J XR-77A84J
RemoteRMF-TX520E RMF-TX520E RMF-TX520ERMF-TX520E RMF-TX520E RMF-TX520ERMF-TX520E RMF-TX520E RMF-TX520E
DestinationCEI , UKA, CEP CEI CEI , UKACEI , UKA, CEP CEI CEI , UKACEI , UKA, CEP CEI CEI , UKA
MODEL LISTSRemote
1 LIST OF ITEMS TO BRING 1. Screwdriver (e.g. #2 Phillips Screwdriver) 2. Multimeter 3. ESD Wrist Straps 4. Metal Washer (Flat) or Coin (for remove Rear Cover) 5. Ruler (for remove Rear Cover) 6. Service Manual (Unique) (for remove & replace details)2 OPTIONAL EQUIPMENT 1. Screwdriver (e.g. #0 Phillips Screwdriver) 2. Parts Tray for loose screws and small items 2. Flashlight 3. Service Manual (Common) (for t/shooting information)For Surface Mounted Parts/Connectors: Hot-Air Type soldering Iron is needed.
TOOLS & EQUIPMENT
Thickness: approx. 1.5mm Diameter: 20~25mm (wrap in tape (L=50mm)) Plastic or Metal Ruler (In case of Metal ruler, wrap in tape (L=50mm) for prevent scratches)3
DISSASSEMBLY AND REMOVAL CAUTION 55″4
XR-55A8*J
· Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
·
and shaded parts are critical for safety. Replace only with part number specified.
·
Parts contain confidential information. Strictly follow the instruction whenever the components are repaired and/or replaced
1-4 EXPLODED VIEW AND PART LIST
25
5
11
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when ordering these components.Picture provided in this section might have slight difference from the actual sets. The reference number beside the part indicates the disassembly sequence. Remove screws before disassembly. Unplug connectors before disassembly* Only on limited region / country / TV model
21
22 4-745-336-01 SLIDE, CLAMP(MINI) 23 2-650-770-21 SLIDE, CLAMP
20 10
19 26
6 43
9
13
12
24 5-009-031-02 CLAMPER,CABLE
2
S(BNN)
18
17
Stand
14
8
7
27 28
16
15 1
3
5
HARNESS/CABLES 55″
4 31 2 56 7
REF. NO PART NO.
1
1-010-633-11
2
1-010-635-11
3
1-010-577-11
4
1-010-578-11
5
1-010-579-11
6
1-010-629-11
7
1-010-631-11
DESCRIPTIONFLEXIBLE FLAT CABLE 41P FLEXIBLE FLAT CABLE 51P CONNECTOR ASSY 20P CONNECTOR ASSY 6PCONNECTOR ASSY 28PFLEXIBLE FLAT CABLE 20P FLEXIBLE FLAT CABLE 25P
REMARKSCN6801(B)-CN7(TCON)(1) CN6800(B)-CN5(TCON)(1) CN6401(PSU)-CN1700(B)(1) CN6613(B)-SP(1) CN6601(PSU)-CN8(TCON)CN6(TCON)(1) CN3803(B)-BT(1) CN1200(B)-CN102(H)(1)
6
REF. NO14 14 19 26
PART NO.A-5026-262-A A-5026-263-A 1-010-549-11 A-5026-952-A 1-912-832-11 1-002-007-11 1-001-115-12
DESCRIPTIONCOMPL SVC BM5S21_AT_EUUK COMPL SVC BM5S21_AT_EUUK_DERI G11B – STATIC CONVERTER(TV) P-MOD (YDBO055UNG01)(SVC) POWER-SUPPLY CORD SET(EU) C17 AC CORD SET(SWISS) POWER-SUPPLY CORD SET(UK)
PART LIST 55″REMARKSCEI, CEP CEI, CEP UKA
Printed Circuit Board, incl. capacitors Printed Circuit Board, incl. capacitors Internal Power Supply OLEDCable
7
DISSASSEMBLY AND REMOVAL CAUTION 65″8
XR-65A8*J
· Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
·
and shaded parts are critical for safety. Replace only with part number specified.
·
Parts contain confidential information. Strictly follow the instruction whenever the components are repaired and/or replaced
2-4 EXPLODED VIEW AND PART LIST
11 5
26 22
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when ordering these components.Picture provided in this section might have slight difference from the actual sets. The reference number beside the part indicates the disassembly sequence. Remove screws before disassembly. Unplug connectors before disassembly* Only on limited region / country / TV model23 4-745-336-01 SLIDE, CLAMP(MINI) 24 2-650-770-21 SLIDE, CLAMP
21
10
20
19 6 943 1
13 12
18 14
17
8
16
15
27 2 7
25 5-009-031-02 CLAMPER,CABLE S(BNN)Stand28 29
3 9
HARNESS /CABLES 65″
4 5
6 7
31 2
REF. NO PART NO.
DESCRIPTION
1
1-010-633-11 FLEXIBLE FLAT CABLE 41P
2
1-010-635-11 FLEXIBLE FLAT CABLE 51P
3
1-010-577-11 CONNECTOR ASSY 20P
4
1-010-578-11 CONNECTOR ASSY 6P
5
1-010-579-11 CONNECTOR ASSY 28P
6
1-010-629-11 FLEXIBLE FLAT CABLE 20P
7
1-010-631-11 FLEXIBLE FLAT CABLE 25P
REMARKSCN6801(B)-CN7(TCON)(1) CN6800(B)-CN5(TCON)(1) CN6401(PSU)-CN1700(B)(1) CN6613(B)-SP(1) CN6601(PSU)-CN8(TCON)CN6(TCON)(1) CN3803(B)-BT(1) CN1200(B)-CN102(H)(1)
10
REF. NO14 14 20 27
PART NO.A-5026-262-A A-5026-263-A 1-010-550-11 A-5026-953-A 1-912-832-11 1-002-007-11 1-001-115-12
DESCRIPTIONCOMPL SVC BM5S21_AT_EUUK COMPL SVC BM5S21_AT_EUUK_DERI G11 – STATIC CONVERTER(TV) P-MOD (YDBO065UNG01)(SVC) POWER-SUPPLY CORD SET(EU) C17 AC CORD SET(SWISS) POWER-SUPPLY CORD SET(UK)
PART LIST 65″REMARKSCEI, CEP CEI, CEP UKA
Printed Circuit Board, incl. capacitors Printed Circuit Board, incl. capacitors Internal Power Supply OLEDCable
11
DISSASSEMBLY AND REMOVAL CAUTION 77″12
XR-77A8*J
· Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
·
and shaded parts are critical for safety. Replace only with part number specified.
·
Parts contain confidential information. Strictly follow the instruction whenever the components are repaired and/or replaced
3-4 EXPLODED VIEW
AND PART LIST
5
11
29
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when ordering these components.Picture provided in this section might have slight difference from the actual sets. The reference number beside the part indicates the disassembly sequence. Remove screws before disassembly. Unplug connectors before disassembly* Only on limited region / country / TV model
27
28 265077021 SLIDE, CLAMP (5pcs)
10
25
26
30
6
4 3
14
9
13
24
16 1523
12
22
2
Stand
17
8 21
24
31 32
18
20
7
1
19
3 13
HARNESS/CABLES 77″
4 3
12 5
6
7
REF. NO1 2 3 4 56 7
PART NO.1-010-642-11 1-010-644-11 1-010-580-11 1-010-581-111-010-582-111-010-637-11 1-010-639-11
DESCRIPTION
REMARKS
FLEXIBLE FLAT CABLE 41P CN6801(B)-CN7(TCON)(1)
FLEXIBLE FLAT CABLE 51P CN6800(B)-CN5(TCON)(1)
CONNECTOR ASSY 20P
CN6401(PSU)-CN1700(B)(1)
CONNECTOR ASSY 8P CONNECTOR ASSY 30P FLEXIBLE FLAT CABLE 20P
CN6612(B)-SP(1)CN6601(PSU)-CN8(TCON)-CN6(TCON)CN14(TCON)(1) CN3803(B)-BT(1)
FLEXIBLE FLAT CABLE 25P CN1200(B)-CN102(H)(1)
14
PART LIST 77″
REF. NO18 18 25 30
PART NO.A-5026-285-A A-5026-286-A 1-010-551-11 1-011-883-11 1-912-832-11 1-002-007-11 1-001-115-12
DESCRIPTIONCOMPL SVC BM5S21_AT77_EUUK COMPL SVC BM5S21_AT77_EUUK_DER G12 – STATIC CONVERTER(TV) OLED PANEL(L77APA1) POWER-SUPPLY CORD SET(EU) C17 AC CORD SET(SWISS) POWER-SUPPLY CORD SET(UK)
REMARKSCEI, CEP CEI, CEP UKA
Printed Circuit Board, incl. capacitors Printed Circuit Board, incl. capacitors Internal Power Supply OLEDCable
15
9-888-795-42
Sony EMCS (M) Sdn. Bhd. SHES-M
English © 2021.04
[xyz-ips snippet=”download-snippet”]