soundcore Flare+ Portable Bluetooth Speaker User Manual
Safety Instructions
- Avoid dropping
- Do not disassemble
- Soundcore Flare+ can be immersed in water up to 1m for up to 30
- Avoid extreme
- Do not use the device outdoors during
- Use original or certified
- Do not use any corrosive cleaner/oil to
What’s Included
At a Glance
- Volume Buttons for Volume Control 6 Power Button
- Bass Up Button 7 USB port
- Multi-function Button 8 micro USB Port
- Light Effects Button 9 3.5mm Audio Input Port
- Bluetooth Button
Using Your Soundcore Flare+
1. Turn on / off
a. Bluetooth mode
| Flashing White | Bluetooth Pairing Mode |
| Solid White | Connected to a device |
| Enter True Wireless Stereo Group Mode / Disconnect True Wireless Stereo | |
| Double Flashing White | True Wireless Stereo Group Mode |
| Solid White | Connected to True Wireless Stereo |
With True Wireless Stereo technology, you can pair your Soundcore EN Flare+ with another Soundcore Flare+ to explore the best sound effectswith left and right sound channels separated on both speakers.
| Play / Pause |
| Play Next Song |
| Play Previous Song |
| Press to turn Bass Up on and off |
| Press and hold for 2 seconds to reset Equalizer settings |
| Answer Call / End Call |
| Reject Call / Switch between a call on hold and an active call |
| End current call and answer incoming call / End current call and switch to call on hold |
| Switch audio source between Speaker and Phone |
| Put current call on hold and answer incoming call |
| Activate Siri / Other Voice Control Software |
| Volume Up / Down |
| Solid White | On a Call |
| Flashing White | Incoming Call |
| Press and hold for 2 seconds to turn Light Effects Of f |
| Press to turn Light Effects On |
| Press once to switch between Light Effects modes |
Check available Light Effects modes on Soundcore App.
When turned on, Soundcore Flare+ will automatically connect to the last connected device if available. If not, press the Bluetooth pairing button to activate pairing mode. To pair a different device, press the Bluetooth button to re-enter pairing mode. Then repeat the pairing steps. Having connection problems? Remove Soundcore Flare+ from your device’s Bluetooth history and ensure it’s less than 3 feet away. Then try pairing again. To get the best sound quality, make sure there is aclear line of sight between the connected device and your speaker.
b. AUX-In mode
* SoundLine AUX cable sold separately.
Plugging in an audio cable will automatically switch to AUX mode. When using AUX mode, control audio playback via the connected device.
Plugging in an audio cable will automatically switch to AUX mode.When using AUX mode, control audio playback via the connected device.
Charging your Soundcore Flare+
| Slow Flashing Red | Low Battery |
| Solid Red | Charging |
| Off | Fully Charged |
Use the included USB cable to charge your Soundcore Flare+ and make sure it is fully charged before its first use.Disconnect your speaker from the charger when fully charged. Do not charge your speaker for extended periods. When not in use, store your speaker in a cool place
.Specifications
Specifications are subject to change without notice.
Input: 5 V 2 ACharge out: 5 V 1 AAudio output: 25 WCharging time: 4.0 hoursPlay time (varies by volume level and music content): 20 hoursSize: 100 x 100 x 182 mmWeight (without packaging): 853 g / 30.1 ozBluetooth version: V5.0Bluetooth range: 20 m / 66 ft
Soundcore App
Soundcore App– Light effect– Update firmware– Wave Equalizer– Stereo or Boost mode– Rename– More
Apple and the Apple logo are Google Play and the Google Playtrademarks of Apple Inc logo are trademarks of Google Inc.
Read More About This Manual & Download PDF:
[xyz-ips snippet=”download-snippet”]