Soundcore Life Dot 2 User Manual

Charging

Open or close the charging case to activate the LED battery indicator.

  • Fully charge both the earbuds and the charging case before the first use.
  • To prevent damage, use the provided USB-C cable.
  • Fully dry off the earbuds and the USB port before charging.

LED indicator

Powering On/Off

  • To manually power on, press and hold the multi-function button on both earbuds for 1 second until the LED indicator turns white for 1 second.
  • To manually power off, press and hold the multi-function button on either earbud for 8 seconds until the LED indicator turns red for 1 second.

PairingTrue Wireless Stereo ConnectionThe right earbud will automatically connect with the left earbud when taken out ofthe charging case

LED indicator (Earbuds)

  • The right earbud is the primary earbud by default. In TWS mode, place eitherone of the earbuds into the charging case, the other one will switch to be the primary earbud.
  • When powered on and connected, if either one of the earbuds is out of battery and powered off, you can keep using the other one.

Bluetooth Pairing with your Device

  1. Take the earbuds out of the charging case or manually power on the earbuds, theearbuds enter the Bluetooth pairing mode successfully when the LED indicator on either earbud flashes white.
  2. Turn on Bluetooth on your device and click “Soundcore Life Dot 2”. The LED indicator on either earbud will turn white for 1 second when Bluetooth connected.

LED indicator (Earbuds)

  • When earbuds are out of the charging case and powered off, to manually enter Bluetooth pairing mode, press and hold the multi-function button on both earbuds for 3 seconds.
  • Each time you power on your Soundcore earphones, it will automatically connect to your last successfully connected device if available within the Bluetooth range.

Wearing

  1. Choose the EarTips and EarWings that fit your ears best.
  2. Insert the earbuds into the inner canal of your ears.
  3. Turn and find the most comfortable position.

Button Controls

Reset

    1. Place the earbuds into the charging case and make sure they are being charged.
    2. Press and hold the button on both earbuds for 8 seconds until the LED indicators on earbuds flash red for 3 times.

All the memory data will be cleared.

SpecificationsSpecifications are subject to change without notice.

Soundcore Life Dot 2 User Manual – Soundcore Life Dot 2 User Manual –

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,