SPARTAN Bluetooth Wireless Sport Headphones User Manual

Bluetooth Wireless Sport Headphones

Preface

Dear Customer

Congratulations on purchasing the new Spartan Bluetooth wireless sport headphones! Your new headphones are especially ideal for listening to your favorite music playlist or podcasts while you are working out. To make the best use out of your Spartan headphones, please completely read this user manual before you start using them.

Product Description

• Please keep or use it at normal temperatures.
• Do not throw it.
• Do not disassemble, repair or modify it.
• Do not clean it with any chemical solvents.
• Use provided USB cable to charge it.
• Do not throw in or keep close to fire to avoid any danger.

Features

Power on: press and hold the MFB button for 3 seconds (the LED indicator light will flash in blue) Power off: press and hold the MFB button 3 for seconds (the LED  indicator light will flash in red)Answering a call: short press the MFB button once Ending a call: short press the MFB button once Rejecting a call: Press the – button for 2 seconds Redial the last called number: double press the MFB button while the headset is in standby mode Voice dialing: with the headset in standby mode, long press the MFB button for 1 second and release (your phone must support this function) Pause/play: short press the MFB button to pause and play while headset is in standby mode Previous/next song: press the – button for 1 second to switch to the previous track, press the + button for 1 second to switch to the next track Volume control: short press the + or – button to control the volume

Tip: not all mobile phones or brands support these functions, please read your phone’s manual carefully

Voice prompts

• When the headset is turned on, you will hear: “Power on”
• When the headset is turned off, you will hear: “Power off”
• After succesful pairing, you will hear: “Connected”
• When battery is low, you will hear: “Battery low”
• After succesful pairing, you will hear: “Connected”
• When you receive an incoming call, you will hear the callers’ phone number

Pair to your mobile phone

• It is adviced to keep less than 1 meter distance between the headset and your phone during the first time pairing
• Hold and press the MFB button for 5 seconds with the headset turned off, after which a red and blue light will flash rapidly, indicating that the device has entered pairing mode
• After your phone detects the headset, confirm by choosing “Spartan” from your phone screen. Enter the code “0000” if your phone asks for a code (some phones require a code)
• A blue light will flash after succesfully pairing your device
• Repeat the above steps if pairing does not succeed

Power alarm: when the battery is low, you will hear the voice prompt “Battery low”. The headset will automatically turn off if the battery level is too low.

Connect two mobile phones at the same time

• Pair with the first mobile phone, and after that turn off the bluetooth function of the first one; then pair with the second mobile phone
• Turn on the bluetooth function of the first mobile phone, and connect with the headset by choosing “Spartan” from the list

Note: Not all mobile phones support this function

Charging the headsetThe headset has a rechargeable battery, please fully charge it before you start using it for the first time

• Plug the charging cable into the USB socket to start charging
• The red LED indicator light remains on while charging
• A full charge takes about 2 hours
• A blue LED indicator light will show when charged fully

Tips

Notes:

1. When using the headset, always try to keep it as close as possibleto your mobile phone in order to enjoy the best connection.
2. Metal or other objects between the headset and your mobile phone will influence the wireless signal.

Warning:

1. The headset uses a built-in rechargeable battery which is nonremovable. Do not attempt to remove the battery from the headset, to avoid danger or damaging the headset.
2. Please use the original charging cable which is provided with the headset for charging, and choose the USB port of a computer or mobile phone charger with 5V voltage, 100MAH-LA, or less than 100MAH-1A current to charge. You will damage the headset if you use a higher voltage or current to charge.
3. Please stick to the instructions in this user manual, improper use can cause damage to the headset or danger to the user.

Handling of waste

At the end of its working life, this product should not be disposed of with other household waste.To prevent possible harm to the environment or human health, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.