XBR55 Semi Recumbent Bike
XBR55 SEMI – RECUMBENT BIKE OWNER’S MANUAL
TABLE OF CONTENTS3 IMPORTANT SAFETY INSTRUCTIONS 4 IMPORTANT ELECTRICAL INSTRUCTIONS 6 IMPORTANT OPERATION INSTRUCTIONS 6 PRODUCT REGISTRATION 7 XBR55 ASSEMBLY INSTRUCTIONS 14 CONSOLE OPERATION 21 PROGRAMMABLE FEATURES 29 USING HEART RATE TRANSMITTER 30 USING THE SPIRIT FIT APP 33 GENERAL MAINTENANCE 34 MANUFACTURER’S LIMITED WARRANTYThank you for purchasing our product, please save these instructions. Please do not perform or attempt any customizing, adjustments, repair or maintenance that is not described in this manual.
Congratulations on your new semi-recumbent bike and welcome to the Spirit Fitness family!Thank you for your purchase of this quality semi-recumbent bike from Spirit Fitness.Your new semi-recumbent bike was manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available.Through your dealer, Spirit Fitness will do all we can to make your ownership experience as pleasant as possible for many years to come. If not purchased direct from Spirit Fitness, the local dealership where you purchased this semi-recumbent bike is your administrator for all Spirit Fitness warranty and service needs.Their responsibility is to provide you with the technical knowledge and service personnel to make your experience more informed and any difficulties easier to remedy.Please take a moment at this time to record the name of the dealer, their telephone number, and the date of purchase below to make any future, needed contact easy.We appreciate your support and we will always remember that you are the reason that we are in business.Yours in Health, Spirit FitnessNAME OF DEALER _________________________________DEALER PHONE # _________________________________PURCHASE DATE _________________________________2
Important Safety InstructionsWARNING
described in this manual. Do not use attachments notrecommended by the manufacturer. · Never operate this appliance if it has a damaged cord
When using an electrical appliance, basic precautionsshould always be followed, including the following:Read all instructions before using this appliance.DANGER – To reduce the risk of electric shock:Always unplug this appliance from the electrical outletimmediately after using and before cleaning. WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons, install the bike on a flat level surface with access to a 115-volt, 15-amp grounded outlet with only the bike plugged into the circuit.
· · ··
or plug, if it is not working properly, if it has beendropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair.Do not carry this appliance by supply cord or usecord as a handle.Keep the cord away from heated surfaces. Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, andthe like. Never drop or insert any object into any opening.
DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER,WITH ONLY ONE OUTLET ON THE END:
· Do not use outdoors. · Do not operate where aerosol (spray) products are
· To reduce the risk of burns, fire electric shock, orinjury to persons: · An appliance should never be left unattended whenplugged in. Unplug from outlet when not in use, andbefore putting on or taking off parts. · Do not operate under blanket or pillow. Excessiveheating can occur and cause fire, electric shock, orinjury to persons. · Close super vision is necessary when this applianceis used by, on, or near children, invalids, or disabledpersons.
being use or where oxygen is being administered. · Connect this appliance to a properly grounded outletonly. · The appliance is intended for household use. · This exercise equipment is not intended for use bypersons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge. · Keep children under the age of 13 away from this machine. SAVE THESE INSTRUCTIONS – THINK SAFETY!
· Use this appliance only for its intended use as
3
Fitness Equipment Safety Instructions To disconnect turn all controls to the off position, then remove the plug from the outlet. · Do not operate equipment on deeply padded, plush or shag carpet. Damage to both carpet and equipment mayresult. · Before beginning this or any exercise program, consult a physician.This is especially important for persons over theage of 35 or persons with pre-existing health conditions. · Do not attempt to use your equipment for any purpose other than for the purpose it is intended. · Keep hands away from all moving parts. · The pulse sensors are not medical devices.Their purpose is to provide you with an approximate measurementin relation to your target heart rate. Use of a chest transmitter strap (sold separately) is a much more accurate method of heart rate analysis .Various factors, including the user’s movement, may affect the accuracy of heart rate readings.The pulse sensors are intended only as exercise aids in determining heart rate trends in general. · Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your equipment. Quality athletic shoes are recommended to avoid leg fatigue.Failure to follow all guidelines may compromise the effectiveness of the exercise experience, expose yourself (and possibly others) to injury, and reduce the longevity of the equipment.
Important Electrical InstructionsWARNING
NEVER remove any cover without first disconnecting D.C. power. If voltage varies by ten percent (10%) or more, the performance of your fitness bike may be affected. Such conditions are not covered under your warranty. If you suspect the voltage is low, contact your local power company or a licensed electrician for proper testing.
NEVER expose this Semi-Recumbent Bike to rain or moisture.This product is NOT designed for use outdoors, near
a pool or spa, or in any other high humidity environment.The operating temperature specification is 40 to 120 degrees
4
Fahrenheit, and humidity is 95% non-condensing (no water drops forming on surfaces).
Circuit Breakers: Some circuit breakers used in homes are not rated for high inrush currents that can occur when a equipment is first turned on or even during use. If your equipment is tripping the house circuit breaker (even though it is the proper current rating) but the circuit breaker on the equipment itself does not trip, you will need to replace the home breaker with a high inrush type.This is not a warranty defect. This is a condition we as a manufacture have no ability to control.This part is available through most electrical supply stores. Examples: Grainger part # 1D237, or available online at www.squared.com part #QO120HM.The electrical outlet used should have a dedicated 15 amp circuit breaker.WARNINGThis product can expose you to chemicals including Toluene and Acrylamide which are known to the State of California to cause Cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov5
Important Operation Instructions
· NEVER operate this Semi-Recumbent Bike without reading and completely understanding the results of any
operational change you request from the computer. · Understand that changes in resistance do not occur immediately. Set your desired resistance level on the computer
console and release the adjustment key.The computer will obey the command gradually.· NEVER use your fitness bike during an electrical storm. Surges may occur in your household power supply that could damage fitness bike components. Unplug the fitness bike during an electrical storm as a precaution.
· Use caution while participating in other activities while pedaling on your Semi-Recumbent Bike; such as watching television, reading, etc.These distractions may cause you to lose balance which may result in serious injury.
· Do not use excessive pressure on console control keys.They are precision set to function properly with little finger
pressure.
Serial Number Location
Record Your Serial NumberPlease record the serial number of this fitness product in the space provided below.
Serial Number:
Register Your PurchaseThe self-addressed product registration card must be completed in full and returned to Spirit Fitness.You can also go to http://www.spiritfitness.com/warranty under the Support tab to register online. 6
XBR55 PRE ASSEMBLY
UNPACKING 1. Cut the straps, then along the dotted line on the bottom of the box;lift the box over the unit and unpack.2. Locate the hardware package.The hardware is separated into four steps. Remove the tools first. Remove the hardware for each step as needed to avoid confusion.The numbers in the instructions that arein parenthesis (#) are the item number from the assembly drawing forreference.
TOOLS INCLUDED: 12/14mm Wrench 13/15mm Wrench Phillips Screwdriver 13/14mm WrenchPARTS INCLUDED: 1 Main Frame 1 Console Mast 1 Rear Stabilizer 1 Seat Back Frame 1 Front Handle Bar 1 Handle Bar 1 Seat Back Cover 1 Console Mast Cover 1 Front Stabilizer Cover 1 Rear Stabilizer Cover 1 Console 1 Seat Cushion 2 Cup Holders 2 Pedals1 Hardware Kit
7
CONSOLECONSOLE FAN CONSOLE MAST COVER CRANK ARMSFRONT STABILIZER MAIN FRAME8
FRONT HANDLEBARSCONSOLE MAST PEDALSSEAT BACK SEATPULSE GRIPS CUP HOLDERREAR STABILIZER
XBR55 STEP ONE
PART 65 67 84 89 191
HARDWARE FOR STEP 1
TYPE
DESCRIPTION
BOLT
3/8″X53mm
BOLT FLAT WASHER
3/8″XUNC16X4″ Ø3/8″ × Ø25 × 2T
NYLOC NUT CAP NUT
3/8″X7T 3/8″XUNC16X12.5T
QTY 2 2 2 2 2
1. Gather HARDWARE FOR STEP 1.2. Attach the REAR STABILIZER (7) to the MAIN FRAME (1) with the 2 BOLTS (65) and 2 FLAT WASHERS (84) and 2 CAP NUTS (191).Tighten completely with the WRENCH (112).3. Attach the SEAT BACK (5) to the SEAT CARRIAGE (4) of the main frame. Slide 1 BOLT (67) through each side, then attach a NYLOC NUT (89) to each bolt.Tighten the bolts just enough so there is no side to side play, but freedom of movement front to back. Use the WRENCHES provided (112 & 130).4. Insert an END CAP (32) into each opening of the Front Stabilizer Tube.You may need to tap them in with a rubber mallet if they are tight..
9
XBR55 STEP TWO10
HARDWARE FOR STEP 2
PART
TYPE
DESCRIPTION QTY
68
BOLT
5/16″XUNC18X5/8″ 8
76
FLAT WASHER
Ø5/16″ × Ø18 × 1.5T 6
82
SPLIT WASHER
5/16″X1.5T
2
83
CURVED WASHER
Ø5/16″ × 19 × 1.5T
2
99 PHILLIPS HEAD SCREW
M5 × 12mm
4
1. Gather HARDWARE FOR STEP 2.2. Slide the COMPUTER CABLE (44), HANDLEBAR RESISTANCE CONTROL CABLE (148), and HAND PULSE CABLE (45) through the bottom of the CONSOLE MAST COVER (31) and then the bottom of the CONSOLE MAST (2). Make sure the Console Mast Cover is correctly oriented (see illustration).3. Install the CONSOLE MAST (2) into the receiving tube (make sure not to pinch cables; damage to the electronics could occur) of the MAIN FRAME (1). Insert 2 BOLTS (68) and 2 FLAT WASHERS (76) on each side. Insert 2 BOLTS and 2 CURVED WASHERS (83) on the front.Tighten all 6 bolts firmly with the WRENCH (112).
Continued on next page…
4. Remove the white Styrofoam pad (factory installed to prevent bolts from being accidentally dropped into the Console Mast Tube).5. Attach the HANDLE BAR ASSEMBLY (3) onto the CONSOLE MAST (2) bracket with the 2 BOLTS (68), 2 SPLIT WASHERS (82), and 2 FLAT WASHERS (76). Completely tighten with the WRENCH (112). Insert the COMPUTER CABLE (44), HANDLEBAR RESISTANCE CONTROL CABLE (148), and HAND PULSE CABLE (45) into their respective connectors in the back of the CONSOLE ASSEMBLY (19). Attach the console onto the mounting plate with 4 PHILLIPS HEAD SCREWS (99). Tighten with the PHILLIPS HEAD SCREW DRIVER (114).11
XBR55 STEP THREE
HARDWARE FOR STEP 3
PART
TYPE
DESCRIPTION QTY
71
BOLT
3/8″ X 1-3/4″
4
77
FLAT WASHER
Ø3/8″ X Ø19 X 1.5T 4
89
NYLOC NUT
3/8″X7T
4
98 PHILLIPS HEAD SCREW
M6X15MM
4
1. Gather HARDWARE FOR STEP 3.2. Install the SEAT (61) on the SEAT CARRIAGE (4) with 4 PHILLIPS HEAD SCREWS (98).Tighten with the PHILLIPS HEAD SCREW DRIVER (114).3. Attach the SEAT HANDLE BAR (6) to the SEAT CARRIAGE (4) with the 4 Hex Head Bolts (71), 4 FLAT WASHERS (77), and 4 Nyloc Nuts (89).Tighten with the WRENCHES provided (112 & 130).4. Plug the HAND PULSE SENSOR CABLES (27) into the rear two holes on the left side of the rear plastic cover. Plug the HANDLEBAR RESISTANCE CABLES (150) into the remaining front hole..
12
XBR55 STEP FOUR
PART 70 76 91 105
HARDWARE FOR STEP 4
TYPE
DESCRIPTION QTY
BOLT
5/16″XUNC18X1-1/4″ 1
FLAT WASHER
Ø5/16″ × Ø18 × 1.5T 1
NYLOC NUT
5/16″X6T
1
SHEET METAL SCREW
4X16MM
4
1. Gather HARDWARE FOR STEP 4.
2. Install the GAS CYLINDER (57) on the SEAT BACK FRAME (5) with 1 BOLT (70), 1 FLATWASHER (76) and 1 NYLOC NUT (91) by using the WRENCHES provided (112 & 113).
3. Attach the PEDALS (116L, 117R) to the CRANK ARMS (51L, 51R). Tighten with the WRENCH (113). Remember that the LEFT PEDAL has a reverse thread and will be threaded onto the Crank arm in a COUNTERCLOCKWISE motion.There is an “L” stamped in the end of the threaded post of the left pedal and an “R” in the right. Make sure to tighten the pedals as firmly as you can. It may be necessary to re-tighten the pedals if you feel a thumping while pedaling the bike.A thumping or clicking noise is usually caused by loose pedals.
4. Attach the DRINK BOTTLE HOLDERS (39L
& 38R) to the sides of the SEAT HANDLE
BAR (6) with 4 SHEET METAL SCREWS
(105).Tighten with the PHILLIPS HEAD
SCREW DRIVER (114)
13
XBR55 CONSOLE OPERATION
Large Blue-LED Matrix Window Message CenterConvenient cargo compartment forkeys, phone, or MP3 player14
Heart Rate % ProfileFan to keep you coolTen innovative programs offer a variety of work-outs Easy-Touch Control Buttons
POWERWhen the power cord is connected to the equipment, the console will automatically power up. When initially powered on the console will perform an internal self-test. During this time all the lights will turn on.When the lights go off, the Message Center will show the software version (i.e.: VER 1.0).The distance window shows the distance in miles and the time window shows the total hours of use. The odometer will remain displayed for only a few seconds then the console will go to the start up display.The dot matrix display will be scrolling through the different profiles of the programs and the Message Center will be scrolling the start up message.You may now begin to use the console.Dot Matrix Center DisplayTwenty columns of boxes (10 high) indicate each segment of a workout.The boxes only show an approximate level (resistance) of effort.They do not necessarily indicate a specific value – only an approximate percent to compare levels of intensity. In Manual Operation the resistance dot matrix window will build a profile “picture” as values are changed during a workout.15
1/4 Mile TrackThe 1/4-mile track (one lap) will be displayed around the dot matrix window.The flashing segment indicates your progress. Once the 1/4-mile (Metric – 0.4k) is complete this feature will begin again. The Lap track will move in a counterclockwise direction.There is a lap counter in the Message Center for monitoring your distance.
Pulse Grip FeatureThe Pulse (Heart Rate) console window will display your current heart rate in beats per minute during the workout.You must use both stainless steel sensors on the front cross bar or the heart rate transmitter chest strap to display your pulse. Pulse value displays anytime the upper display is receiving a Pulse signal.You may not use the Grip Pulse feature while in Heart Rate Programs.Note: Refer to Important Safety Instructions (page 3) concerning Pulse Grip operation.
Calorie DisplayDisplays the cumulative calories burned at any given time during your workout. Note:This is only a rough guide used for comparison of different exercise sessions, which cannot be used for medical purposes.
Speakers
The console has built-in Speakers.You may plug an Audio Source (CD player, MP3, Computer, etc.)
16
into the jack on the right side of console.There is no volume control on the console.The volume
must be controlled on the Audio Source.
Muscle Activation FigureThere is an anatomical figure located at the top of the console.This figure will light all areas that are activated when using the bike.These will light up during any of the programs.You can control which muscles are activated by customizing the resistance profile during the set up phase of console programming. If you accept the default program profile, the selected program will determine which muscles will be activated by automatically adjusting the resistance. Generally the following guidelines hold true:The upper body LED’s will not light The lower body lights will activate in three degrees of engagement: Green represents minimal muscle involvement,yellow represents medium involvement, and red represents full or heavy activation. These are the different scenarios for lower body muscle activation: Levels 1-10: Green Hamstrings & Gluteals light up;Amber Quadriceps & Calves light up Levels 11-20:Amber Hamstrings & Gluteals light up; Red Quadriceps & Calves light upHeart Rate % ProfileThe console LCD screen will display your current heart rate anytime a pulse is detected.The Bar Graph, located to the right of the LCD screen, will show your current heart rate % in relation to your projected maximum heart rate, which is determined by your age that you entered during the programming phase of any of the 10 programs.The significance of the bar graph colors are as follows:50-60% of maximum is Amber 65-80% of maximum is Amber and Green 85-90% or more is Amber, Green, and Red17
Quick StartThis is the quickest way to start a workout.After the console powers up you just press the Start key to begin, this will initiate the Quick Start mode. In Quick Start the Time will count up from zero and the workload may be adjusted manually by pressing the Level Up/Down buttons. The dot matrix display will have only the bottom row lit at first. As you increase the work load more rows will light indicating a harder workout.The fitness bike will get harder to pedal as the rows increase.There are 20 levels of resistance available for plenty of variety.The first 5 levels are very easy workloads and the changes between levels are set to a good progression for de-conditioned users. Levels 6-10 are more challenging, but the increases in resistance from one level to the next remain small. Levels 11-15 start getting tough as the levels jump more dramatically. Levels 16-20 are extremely hard and are good for short interval peaks and elite athletic training.Basic InformationThe Message Center will initially be displaying the Program name.When in scan mode during a program, speed will be displayed for four seconds, then move on and display Watts (indication of workload). If 100 watts is displayed, you are doing enough work to keep a 100-watt light bulb lit.The data changes to Laps completed, Segment time, Max level. Pressing the Enter button again will bring you back to the beginning.The Stop button actually has several functions. Pressing the Stop key once during a program will pause the program for 5 minutes. If you need to get a drink, answer the phone or any of the many things that could interrupt your workout, this is a great feature.To resume your workout during 18
Pause, just press the Start key. If the Stop button is pressed twice during a workout, the program will end and the console will display your Workout Summary (Total time,Avg. Speed,Avg.Watts,Avg.HR, total Laps). If the Stop key is held down for 3 seconds or a third time during the program, theconsole will perform a complete Reset. During data entry for a program the Stop key performs a previous screen or segment function.This allows you to go back to change programming data.
Program KeysThe Program Keys are used to preview each program.When you first turn the console on you may press each program key to preview what the program profile looks like. If you decide that you want to try a program, press the corresponding program key and then press the Enter key to select the program and enter into the data-setting mode.The fitness bike has a built in heart rate monitoring system. Simply grasping the hand pulse sensors on the stationary handle bars or wearing the heart rate transmitter (see Using Heart Rate Transmitter section) will start the Heart Icon blinking (this may take a few seconds).The Pulse Display Window will display your heart rate, or Pulse in beats per minute.The console includes a built-in fan to help keep you cool.To turn the fan on, press the button on the left side of the console
Programming The Console
Each of the programs can be customized with your personal information and changed to suit your
needs. Some of the information asked for is necessary to ensure the readouts are correct.You will
19
be asked for your Age and Weight. Entering your Age is necessary during the Heart Rate programsto ensure the correct settings are in the program for your Age. Otherwise the work settings couldbe too high or low for you. Entering your Weight aides in calculating a more correct Calorie reading. Although we cannot provide an exact calorie count, we do want to be as close as possible.
CALORIE NOTE: Calorie readings on every piece of exercise equipment, whether it is in a gym or at home, are not accurate and tend to vary widely.They are meant only as a guide to monitor yourprogress from workout to workout.The only way to measure your calorie burn accurately is in a clinical setting connected to a host of machines.This is because every person is different andburns calories at a different rate. Some good news is that you will continue to burn calories at an accelerated rate for at least an hour after you have finished exercising!
Entering A Program & Changing SettingsWhen you enter a program, by pressing a program key, then Enter key, you have the option of entering your own personal settings. If you want to workout without entering new settings, then just press the Start key.This will bypass the programming of data and take you directly to the start of your workout. If you want to change the personal settings then just follow the instructions in the Message Center. If you start a program without changing the settings, the default or saved settings will be used.
NOTE: Age and Weight default settings will change when you enter a new number. So the last Age and Weight entered will be saved as the new default settings. If you enter your Age and Weight the first
time you use the fitness bike, you will not have to enter it every time you work out unless either
20
your Age or Weight changes or someone else enters a different Age and Weight.
Programmable FeaturesMANUALThe Manual program works as the name implies, manually.This means that you control the workload and not the computer.To start the Manual program, follow the instructions below or just press the Manual button, then the Enter button and follow the directions in the Message Center.1. Press the Manual key, then press the Enter key. 2. The Message Center will ask you to enter your Age.You may enter your age, using the Level Up/Down keys,then press the Enter key to accept the new value and proceed on to the next screen. 3. You are now asked to enter your Weight.You may adjust the Weight value using the Level Up/Down keys, thenpress Enter to continue. 4. Next is Time.You may adjust the Time and press Enter to continue. 5. Now you are finished editing the settings and can begin your workout by pressing the Start key.You can also goback and modify your settings by pressing the Enter key. 6. Once the program starts you will be at level one.This is the easiest level and it is a good idea to stay at level one fora while to warm up. If you want to increase the work load at any time press the Level Up key; the Level Down key will decrease the work-load. 7. During the Manual program you will be able to scroll through the data in the Message Center by pressing the Enter key. 8. When the program ends you may press Start to begin the same program again or Stop to exit the program or you can save the program you just completed as a custom user program by pressing a User key and following the instructions in the Message Center21
Preset ProgramsThe Semi – Recumbent Bike has five different programs that have been designed for a variety of workouts.These five programs have factory preset work level profiles for achieving different goals.
HILLThis program follows a triangle or pyramid type of gradual progression from approximately 10% of maximum effort (the level that you chose before starting this program) up to a maximum effort which lasts for 10% of the total workout time, then a gradual regression of resistance back to approximately 10% ofmaximum effort
FAT BURNThis program follows a quick progression up to the maximum resistance level (default or user input level) that is sustained for 2/3 of the workout. This program will challenge your ability to sustain your energy output for an extended period of time.
CARDIO
This program presents a quick progression up to near maximum resistance level
(default or user input level). It has slight fluctuations up and down to allow your
heart rate to elevate, and then recover repeatedly, before beginning a quick cool
down.This will build up your heart muscle and increase blood flow and lung
22
capacity
STRENGTHResistance:This program has a gradual progression of resistance up to 100% of maximum effort that is sustained for 25% of workout duration.This will help build strength and muscular endurance in the lower body and glutes. A brief cool down follows.INTERVALThis program takes you through high levels of intensity followed by recovery periods of low intensity.This program utilizes and develops your “Fast Twitch” muscle fibers which are used when performing tasks that are intense and short in duration. These deplete your oxygen level and spike your heart rate, followed by periods of recovery and heart rate drop to replenish oxygen.Your cardiovascular system gets programmed to use oxygen more efficiently.Programming Preset Programs1. Select the desired program button then press the Enter key. 2. The Message Center will ask you to enter your Age.You may adjust the age setting, using the Up and Downkeys, then press the Enter key to accept the new number and proceed on to the next screen. 3. You are now asked to enter your Weight.You may adjust the weight number using the Up and Down keys, thenpress Enter to continue. 4. Next is Time. You may adjust the Time and press Enter to continue. 5. Now you are asked to adjust the Max Resistance Level.This is the peak exertion level you willexperience during the program (at the top of the hill). Adjust the level and then press Enter. 6. Now you are finished editing the settings and can begin your workout by pressing the Start key.You can also go23
back and modify your settings by pressing the Enter key to go back one level, or screen.7. If you want to increase or decrease the workload at any time during the program press the Up or Down key.This will change the resistance settings of the entire profile, although the profile picture on the screen will not change. The reason for this is so that you can see the entire profile at all times. If the profile picture is changed, it also would be distorted and not a true representation of the actual profile.When you make a change to the resistance, the Message Center will show the current column and program maximum levels of work.8. During the program you will be able to scroll through the data in the Message Center the message Center bypressing the Enter key.9. When the program ends the Message Center will show a summary of your workout.The summary will bedisplayed for a short time then the console will return to the start-up display
Custom User Defined ProgramsThere are two customizable User programs that allow you to build and save your own workout.The two programs, User 1 and User 2, operate exactly the same way so there is no reason to describe them separately.You can build your own custom program by following the instructions below or you can save any other preset program you complete as a custom program. Both programs allow you to further personalize it by adding your name.
1. Select the User program (U1 or U2) then press Enter. If you have already saved a program to either U1 or U2, it
will be displayed and you are ready to begin. If not, you will have the option of inputing a username. In the Message
Center, the letter “A” will be blinking. Use the Level Up/Down buttons to select the appropriate first letter of
your name (pressing the Level Up/Down button will switch to the letter “B”; pressing the Down button will switch
to letter “Z”). Press Enter when the desired letter is displayed. Repeat this process until all of the characters of
your name have been programmed (maximum 7 characters).When finished press Stop.
2. If there is a program already stored in User when you press the key, you will have an option to run the program as
it is or delete the program and build a new one.At the welcome message screen, when pressing Start or Enter
24
you will be prompted: Run Program? Use the Level Up/Down to select Yes or No. If you select No, you will then
be asked if you want to delete the currently saved program. It is necessary to delete the current program if you want to build a new one.The Message Center will ask you to enter your Age.You may enter your age, using the Level Up/Down keys, then press the Enter key to accept the new value and proceed on to the next screen. 3. The Message Center will ask you to enter your Age.You may enter your age, using the Level Up/Down keys, then press the Enter key to accept the new value and proceed on to the next screen. 4. You are now asked to enter your Weight.You may adjust the weight value using the Level Up/Down keys or the numeric key pad, then press Enter to continue. 5. Next is Time.You may adjust the time and press Enter to continue. 6. Now you are asked to adjust the Max Resistance Level of the program, press Enter when resistance has been selected. 7. Now the first column will be blinking and you are asked to adjust the resistance level for the first segment (SEGMENT > 1) of the workout by using the Level Up/Down key. When you finish adjusting the first segment, or if you don’t want to change, then press Enter to continue to the next segment. 8. The next segment will show the same workload resistance level as the previously adjusted segment. Repeat the same process as the last segment then press Enter. Continue this process until all twenty segments have been set. 9. The Message Center will then tell you to press Enter to save the program. After saving the program the Message Center says “program saved” then will give you the option to start or modify the program. Pressing Stop will exit to the start up screen.25
Heart Rate ProgramsThe old motto, “no pain, no gain”, is a myth that has been overpowered by the benefits of exercising comfortably.A great deal of this success has been promoted by the use of heart rate monitors.With the proper use of a heart rate monitor, many people find that their usual choice of exercise intensity was either too high or too low and exercise is much more enjoyable by maintaining their heart rate in the desired benefit range.To determine the benefit range in which you wish to train, you must first determine your Maximum Heart Rate.This can be accomplished by using the following formula: 220 minus your age.This will give you the Maximum Heart Rate (MHR)for someone of your age.To determine the effective heart rate range for specific goals you simply calculate a percentage of your MHR.Your Heart rate training zone is 50% to 90% of your maximum heart rate. 60% of your MHR is the recommended for burning fat while 80% is recommended for strengthening the cardio vascular system.This 60% to 80% is the zone to stay in for maximum benefit.For someone who is 40 years old their target heart rate zone is calculated:220 40 = 180 (maximum heart rate) 180 x .6 = 108 beats per minute (60% of maximum) 180 X .8 = 144 beats per minute (80% of maximum)So for a 40 year old the training zone would be 108 to 144 beats per minute.26
If you enter your age during programming the console will perform this calculation automatically. Entering your age is used for the Heart Rate programs.After calculating your MHR you can decide upon which goal you would like to pursue. The two most popular reasons for, or goals, of exercise are cardiovascular fitness (training for the heart and lungs) and weight control.The black columns on the chart above represent the MHR for a person whose age is listed at the bottom of each column.The training heart rate, for either cardiovascular fitness or weight loss, is represented by two different lines that cut diagonally through the chart.A definition of the lines’ goal is in the bottom left-hand corner of the chart. If your goal is cardiovascular fitness or if it is weight loss, it can be achieved by training at 80% or 60%, respectively, of your MHR on a schedule approved by your physician. Consult your physician before participating in any exercise program. With all Spirit Fitness Heart Rate programs you may use the heart rate monitor feature without using the Heart Rate program.This function can be used during manual mode or during any of the nine different programs.The Heart Rate program automatically controls resistance at the pedals.27
Rate of Perceived ExertionHeart rate is important but listening to your body also has a lot of advantages.There are more variables involved in how hard you should workout than just heart rate.Your stress level, physical health, emotional health, temperature, humidity, the time of day, the last time you ate and what you ate, all contribute to the intensity at which you should workout. If you listen to your body, it will tell you all of these things.The rate of perceived exertion (RPE), also know as the Borg scale, was developed by Swedish physiologist G.A.V. Borg.This scale rates exercise intensity from 6 to 20 depending upon how you feel or the perception of your effort.
The scale is as follows:
Rating Perception of Effort
6 Minimal7 Very,very light 8 Very,very light +
10 Very light +11 Fairly light 12 Comfortable
9 Very light
13 Somewhat hard
14 Somewhat hard +15 Hard 16 Hard +17 Very hard
18 Very hard + 19 Very,very hard 20 Maximal
You can get an approximate heart rate level for each rating by simply adding a zero to each rating. For example a rating of 12 will result in an approximate heart rate of 120 beats per minute.Your RPE will vary depending up the factors discussed earlier.That is the major benefit of this type of training. If your body is strong and rested, you willfeel strong and your pace will feel easier.When your body is in this condition, you are able to train harder and theRPE will support this. If you are feeling tired and sluggish, it is because your body needs a break. In this condition, your pace will feel harder. Again, this will show up in your RPE and you will train at the proper level for that day.28
Wearing The Chest Strap1. Attach the transmitter to the elastic strap using the interlocking key. 2. Adjust the strap as tightly as possible as long as the strap is not too tight to remaincomfortable. 3. Position the transmitter with the logo centered in the middle of your torso facing awayfrom your chest (some people must position the transmitter slightly left of center). Attach the final end of the elastic strap by inserting the round end and, using the locking parts, secure the transmitter and strap around your chest. 4. Position the transmitter directly below the pectoral muscles. 5. Sweat is the best conductor to measure very minute heart beat electrical signals. However, plain water can also be used to pre-wet the electrodes (2 ribbed oval areas on the reverse side of the belt and both sides of the transmitter). It’s also recommended that you wear the transmitter strap a few minutes before your work out. Some users, because of body chemistry, have a more difficult time in achieving a strong, steady signal at the beginning. After “warming up”, this problem lessens. 6. Your workout must be within range – distance between transmitter/receiver to achieve a strong steady signal.The length of range may vary somewhat but generally stay close enough to the console to maintain good, strong, reliable readings.Wearing the transmitter directly on bare skin assures you of proper operation. If you wish, you may wear the transmitter over a shirt.To do so, wet the areas of the shirt that the electrodes will rest upon. Note:The transmitter is automatically activated when it detects activity from the user’s heart.Additionally, it automatically deactivates when it does not receive any activity.Although the transmitter is water resistant, moisture can have the effect of creating false signals, so you should take precautions to completely dry the transmitter after use to prolong battery life (estimated transmitter battery life is 2500 hours).The replacement battery is Panasonic CR2032.29
Using the Spirit F IT AppIn order to help you achieve your exercise goals, your new exercise machine comes equipped with a Bluetooth® transceiver that will allow it to interact with selected phones or tablet computers via theSpirit Fit App.
Just download the free Spirit Fit App from the Apple Store or Google Play, and then follow the instructions in the App to sync with your exercise machine. Now you can view current workout data in three different Display screens on your device.You can also easily switch back and forth from the workout display view to internet/social media/email sites via icons on the display screen.When your workout is finished, the data is automatically saved to the built-in personal calendar for futurereference.
The Spirit Fit App also allows you to sync your workout data with one of many fitness cloud sites we
support:
Syncing the App with your exercise machine:1. Download the App. 2. Open the App on your device (phone or tablet) and make sure Bluetooth® is enabled on your device
(phone or tablet).3. In the App click the icon in the top left corner to search for your Spirit equipment (shown right). 4. After the equipment is detected, click Connect.When the App and equipment are synced, the Bluetooth® icon on the
equipment’s console display will light up.You may now start using your new Spirit Fitness product.5. When you workout is finished, the data is automatically saved and you will be prompted to sync your data with eachavailable fitness cloud site. Please note you will have to download the applicable compatible fitness App,in order for the icon to be active and available.
30
*Note:Your device will need to be running on a minimum operating system of iOs 7 or Android 4.4 for the Spirit Fit App to operate
properly.
Erratic OperationCaution! Do not use this Semi – Recumbent Bike for Heart Rate programs unless a steady, solid Actual Heart Rate value is being displayed. High, wild, random numbers being displayed indicate a problem.Areas to look for interference which may cause erratic heart rate:1. Treadmill not properly grounded – Proper grounding is a must! 2. Microwave ovens,TV’s, small appliances, etc. 3. Fluorescent lights. 4. Some household security systems. 5. Perimeter fence for a pet. 6. Some people have problems with the transmitter picking up a signal from their skin. If you have problems trywearing the transmitter upside down. Normally the transmitter will be oriented so the Spirit Fitness logo is right side up. 7. The antenna that picks up your heart rate is very sensitive. If there is an outside noise source, turning the whole machine 90 degrees may de-tune the interference. 8. Another Individual wearing a transmitter within 3′ of your machine’s console.If you continue to experience problems contact your dealer.Heart Rate Program OperationNote:You must wear a heart rate transmitter strap (sold separately) for this program.Both programs operate the same, the only difference is that HR1 is set to 60% and HR2 is set to 80% of the maximum heart rate.They both are programmed the same way.31
To start the program follow the instructions below or just press the HR key, then press the Enter button and follow the directions in the Message Center.After selecting your heart rate target, the program will attempt to keep you at or within 3-5 heart beats per minute of this value. Follow the prompts in the Message Center to maintain your selected heart rate value.1. Press the HR 1 or HR 2 key then press the Enter key. 2. The Message Center will ask you to enter your Age.You may enter your age, using the Level Up/Down keys,then press the Enter key to accept the new value and proceed on to the next screen. 3. You are now asked to enter your Weight.You may adjust the weight value using the Level Up/Down keys, thenpress Enter to continue. 4. Next is Time.You may adjust the time and press Enter to continue. 5. Now you are asked to adjust the Heart Rate Target.This is the heart rate level you will strive to maintain duringthe program.Adjust the level using the Level Up/Down keys, then press Enter. Note:The heart rate that appears is based on the % you accepted in Step 1. If you change this number it will either increase or decrease the % from Step 1. 6. Now you are finished editing the settings and can begin your workout by pressing the Start key.You can also go back and modify your settings by pressing the Enter key. 7. If you want to increase or decrease the workload at any time during the program press the Level Up/Down key. This will allow you to change your target heart rate at any time during the program. 8. During the HR program you will be able to scroll through the data in the Message Center by pressing the Enter key. 9. When the program ends you may press Start to begin the same program again or Stop to exit the program.32
GENERAL MAINTENANCE1. Wipe down all areas in the sweat path with a damp cloth after each workout. 2. If a squeak, thump, clicking or rough feeling develops the main cause is most likely one of two reasons:I. The hardware was not sufficiently tightened during assembly. All bolts that were installedduring assembly need to be tightened as much as possible. It may be necessary to use a larger wrench than the one provided if you cannot tighten the bolts sufficiently. I cannot stress this point enough; 90% of calls to the service department for noise issues can be traced to loose hardware.II. The crank arm nut needs to be retightened III. If squeaks or other noises persist, check that the unit is properly leveled.There are 2 leveling pads on thebottom of the rear stabilizer, use a 14mm wrench (or adjustable wrench) to adjust the levelers.
Engineering Mode MenuThe console has built in maintenance/diagnostic software.The software will allow you to change the console settings from English to Metric and turn off the beeping of the speaker when a key is pressed for example.To enter the Engineering Mode Menu, press and hold down the Start, Stop and Enter keys. Keep holding the keys down for about 5 seconds and the Message Center will display Engineering Mode Menu. Press the Enter key to access the menu below:
1. Key Test (Will allow you to test all the keys to make sure they are functioning)
2. LCD Test (Tests all the display functions)
3. Functions (Press Enter to access settings and Up arrow to scroll)
I. Display Mode (Turn off to have the console power down automatically after 20 minutes of inactivity)
II. Pause Mode (Turn on allow 5 minutes of pause, turn off to have the console pause indefinitely)
III. ODO Reset (Resets the odometer)
IV. Units (Sets the display to readout in English or Metric display measurements)
V. Beep (Turns off the speaker so no beeping sound is heard)
VI. Motor Test
VII. Safety 4. Security (Allows the keypad to be locked to prevent unauthorized use)
33
Semi – Recumbent Bike Warranty – Effective February 4, 2021Spirit Fitness warrants all its Semi – Recumbent Bike parts for a period of time listed below from the date of retail sale, as determined by sale receipt, or in the absence of a sales receipt eighteen (18) months from the original factory shipping date. Spirit Fitness’ responsibilities include providing new or remanufactured parts, at Spirit Fitness’ option, and technical support to our independent dealers and servicing organizations. In the absence of a dealer or service organization, these warranties will be administered by Spirit Fitness directly to a consumer.The warranty period applies to the followingcomponents:
Warranty Residential
Frame Lifetime
Brake Lifetime
Parts 10 Years
Labor 1 Year
NORMAL RESPONSIBILITIES OF THE CONSUMERThis warranty applies only to products in ordinary household use, and the consumer is responsible for the items listed below: 1. The warranty registration card must be completed and returned to the address listed on the card within 10 days of the original purchase tovalidate the manufacturer’s limited warranty. 2. Proper use of the fitness bike in accordance with the instructions provided in this manual 3. Proper installation in accordance with instructions provided with the fitness bike and with all local electric codes. 4. Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose connections or defects in housewiring. 5. Expenses for making the fitness bike accessible for servicing, including any item that was not part of the fitness bike at the time it was shippedfrom the factory. 6. Damages to the fitness bike finish during shipping, installation or following installation. 7. Routine maintenance of this unit as specified in this manual.EXCLUSIONS This warranty does not cover the following:CONSEQUENTIAL, COLLATERAL, OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTINGFROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY.Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not apply toyou. 1. Service call reimbursement to the consumer. Service call reimbursement to the dealer that does not involve malfunction or defects inworkmanship or material, for units that are beyond the warranty period, for units that are beyond the service call reimbursement period, for fitness bike not requiring component replacement, or fitness bike not in ordinary household use. 2. Damages caused by services performed by persons other than authorized Spirit Fitness service companies; use of parts other than original Spirit Fitness parts; or external causes such as corrosion, discoloration of paint or plastic, alterations, modifications, abuse, misuse, accident, impropermaintenance, inadequate power supply, or acts of God.34
3. Products with original serial numbers that have been removed or altered. 4. Products that have been: sold, transferred, bartered, or given to a third party. 5. Products that do not have a warranty registration card on file at Spirit Fitness. Spirit Fitness reserves the right to request proof of purchase if nowarranty record exists for the product. 6. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OFMERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE. 7. Product use in any environment other than a residential setting. 8. Warranties outside of North America may vary. Please contact your local dealer for details.SERVICE Keep your bill of sale.Twelve (12) months from the date on the bill of sale or eighteen (18) months from the date of factory shipping as determined by the serial number establishes the labor warranty period should service be required. If service is performed, it is in your best interest to obtain and keep all receipts.This written warranty gives you specific legal rights.You may also have other rights that vary from state to state. Service under this warranty must be obtained by following these steps, in order: 9. Contact your selling authorized Spirit Fitness dealer. OR 10. Contact your local authorized Spirit Fitness service organization. 11. If there is a question as to where to obtain service, contact our service department at (870) 935-1107. 12. Spirit Fitness’ obligation under this warranty is limited to repairing or replacing, at Spirit Fitness’ option, the product through one of ourauthorized service centers.All repairs must be preauthorized by Spirit Fitness. If the product is shipped to a service center freight charges to and from the service center will be the customer’s responsibility. For replacement parts shipped while the product is under warranty, the customer will be responsible for shipping and handling charges. For in-home service, the customer will be responsible for a trip charge.There will be an additional trip charge if the customer is located over 100 miles from the nearest service center. 13. The owner is responsible for adequate packaging upon return to Spirit Fitness. Spirit Fitness is not responsible for damages in shipping. Make all freight damage claims with the appropriate freight carrier. DO NOT SHIP ANY UNIT TO OUR FACTORY WITHOUT A RETURN AUTHORIZATION NUMBER. All units arriving without a return authorization number will be refused. 14. For any further information, or to contact our service department by mail, send your correspondence to:Spirit Fitness, Inc. P. O. Box 2037 Jonesboro, AR 72402-2037Product features or specifications as described or illustrated are subject to change without notice.All warranties are made by Spirit Fitness, Inc.This warranty applies only in the 48 contiguous United States. NOTE:This does not apply to Alaska or Hawaii.35
NOTES36
37
800.258.4555 www.spiritfitness.com
Spirit Fitness 3000 Nestle Road Jonesboro,AR 72401XBR55 Owners Manual © 2021 All Rights Reserved Revision: 02.04.2021
References
[xyz-ips snippet=”download-snippet”]