Note: If your Squegg doesn’t vibrate after a few seconds, you may need to charge it. See page 5 for more instructions.
How to start Squegging
How to use the phone holder
You can:
1. Insert your finger inside the slot to secure your hold on your mobile while you Squegg;2. Turn your phone around in landscape orientation and use the holder as a stand!
To charge your SQUEGG:Connect the jack to the charging port of your Squegg – located on the side, marked DC.Push the jack into the port.Make sure the jack is inserted securely and properly.Your Squegg will vibrate once charging has started.Charge for a minimum of 2 hours to 100%.Standby time: 100 daysContinuous working hours: 80 hours
Troubleshooting guidelines:
– Make sure your mobile’s bluetooth function is switched on.– Check if app is updated to the newest version.– Charge your Squegg as it might be lacking battery charge. Upon connecting it to the charger, squeeze the Squegg ball for 3 seconds and wait for it to vibrate.– While charging, if your battery is not showing charge, squeeze the Squegg for 3 seconds and wait for it to vibrate.– Everytime you open the app, squeeze your Squegg for 3 seconds and wait for it to vibrate, or check if the Bluetooth symbol on the upper right side of the app no longer has the rotating arrows around it.– If you’re unable to connect, reset your Bluetooth by switching it off and then turning it back on.
If none of the above works, please reach out to [email protected] and provide the following details:
Built: iOS or AndroidApplication version:Phone name:Contact info:If possible, share a video for the team to deep dive on the issue.More videos:bitly.mySOUEGG
#StartSqueggingNowmysquegg.cominstagram.com/mysqueggfacebook.com/mysqueggtwitter.com/mysqueggFor any concerns, please email us at [email protected]
[xyz-ips snippet=”download-snippet”]