STAMINA 35-1442C Water Rower Owner’s Manual

Owner’s Manual

Product May Vary Slightly From Pictured.

CAUTION:The weight of this product should not exceed 300 lbs.

This Product is Distributed Exclusively by

2040 N Alliance Ave, Springfield, MO 65803Customer Care1 (800) 375-7520www.staminaproducts.com

WARNINGExercise can present a health risk. Consult a physician before beginning any exercise program with this equipment. If you feel faint or dizzy,  immediately discontinue use of this equipment. Serious bodily injury can occur if this equipment is not assembled and used correctly. Seriousbodily injury can also occur if all instructions are not followed. Keep others and pets away from equipment when in use. Always make sure all bolts and nuts are securely tightened prior to each use. Follow all safety instructions in this manual.When calling for parts or service, please specify the following numbers :Model#: 35-1442CS/N: _____________

STAMINA PRODUCTSMADE IN CHINA© 2021 Stamina Products, Inc.2021, 05

Quickstart GuideIMPORTANT

Smart Audio Workouts for Your RowerGo to the App Store on your device or scan the QR Code for quick access.

https://link.muuv.fit/qr?id=080&brand=stamina&model=staminaxwaterrower&sku=351442C

Download the app and get moving!Assembly video included in-app.

Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google LLC.

SAFETY INSTRUCTIONS

WARNING-Cancer and Reproductive Harm www.P65Warnings.ca.govWARNING Consult your physician before starting this or any exercise program. This is especially important if you are over the age of 35, have never exercised before, are pregnant, or suffer from any health problem. This product is for home use only. Do not use it in institutional or commercial applications. Failure to follow all warnings and instructions could result in serious injury or death.WARNING The Bungee Cord(51) contains natural rubber latex which may cause allergic reactions.WARNING To reduces the risk of serious injury, read the following Safety Instructions before using the STAMINA│X Water Rower.

  1. Save these instructions and ensure that other exercisers read this manual prior to using the STAMINA│X Water Rower for the first time.
  2. Read all warnings and cautions posted on the STAMINA│X Water Rower.
  3. The STAMINA│X Water Rower should only be used after a thorough review of the Owner’s Manual.Make sure that it is properly assembled and tightened before use.
  4. We recommend that two people be available for the assembly of this product.
  5. Keep children away from the STAMINA│X Water Rower. Do not allow children to use or play on the STAMINA│X Water Rower. Keep children and pets away from the STAMINA│X Water Rower when it is in use.
  6. It is recommended that you place this exercise equipment on an equipment mat.
  7. Set up and operate the STAMINA│X Water Rower on a solid level surface. Do not position theSTAMINA│X Water Rower on loose rugs or uneven surfaces.
  8. Make sure that adequate space is available for access to and around the STAMINA│X Water Rower.
  9. Before using, inspect the STAMINA│X Water Rower for worn or loose components and securely tighten or replace any worn or loose components prior to use.
  10. Consult a physician prior to commencing any exercise program and follow his/her recommendations in developing your fitness program. If at any time during exercise you feel faint, dizzy, or experience pain, stop and consult your physician.
  11. Follow your physician’s recommendations in developing your own personal fitness program.
  12. Always choose the workout which best fits your physical strength and flexibility level. Know your limits and train within them. Always use common sense when exercising.
  13. Do not wear loose or dangling clothing while using the STAMINA│X Water Rower.
  14. Never exercise in bare feet or socks; always wear proper footwear such as running, walking, or cross-training shoes that fit well, provide foot support, and feature non-skid rubber soles.
  15. Be careful to maintain your balance while using, mounting, dismounting, or assembling the STAMINA│X Water Rower, loss of balance may result in a fall and serious bodily injury.
  16. The STAMINA│X Water Rower should not be used by persons weighing over 300 pounds.
  17. The STAMINA│X Water Rower should be used by only one person at a time.
  18. The STAMINA│X Water Rower is for consumer use only. It is not for use in public or semipublic facilities.

EXTEND YOUR PARTS WARRANTY TO 180 DAYS FROM THE DATE OF PURCHASE. REGISTER YOUR PRODUCT.

NEED HELP?CONTACT US FIRST1 (800) 375-7520[email protected]

Hi! From all of us here at Stamina Products, thank you for your purchase. We know that you have big fitness goals in mind and we are here to help you along.Call us, email us, or send us a message on Facebook. Be sure to contact us if you have any questions about your new product. We look forward to hearing from you!

With your body in mind,Stamina Customer Care

To enact your extended warranty and to help us better serve you, please go online and register your new product.register.staminaproducts.comIt is quick and easy to register online, but if you’re a little old school or just need a reason to raise that little flag on your mailbox, fill out the info on the last page of this manual and mail it in.

[email protected]www.staminaproducts.com

1 (800) 375-7520

FAX (417) 889-8064

MAILStamina Products, Inc.ATTN: Customer Care 2040 N Alliance Ave Springfield, MO 65803

facebook.com/StaminaProductsfacebook.com/AeroPilates

CUSTOMER CARE HOURS:Monday-Thursday, 7:30 AM-5:00 PM, Central TimeFriday, 8:00 AM-3:00 PM, Central Time

BEFORE YOU BEGIN

Thank you for choosing the STAMINA│X Water Rower. We take great pride in this quality product and hope it will provide many hours of quality exercise to make you feel better, look better, and enjoy life to its fullest.It’s a proven fact that a regular exercise program can improve your physical and mental health.Too often, our busy lifestyles limit our time and opportunity to exercise. The STAMINA│X Water Rower provides a convenient and simple methodto begin your journey of getting your body in shape and achieving a happier and healthier lifestyle.Before reading further, please review the drawing below and familiarize yourself with the parts that are labeled. Locate the serial decal on the product and write the serial number on the cover of the manual in the space provided. See the next page for an image of the serial decal.The model number and serial number are required when calling for assistance.Read this manual carefully before using the STAMINA│X Water Rower.Providing you with a quality product is Stamina’s top priority. However, sometimes there could be a missing or incorrectly sized part. If you have any questions or problems with the parts included with your STAMINA│X Water Rower, please do not return the product. Contact us FIRST!If a part is missing or defective, please contact Customer Care for assistance. Call us toll-free at 1-800-375-7520 (in the U.S.) or live chat on staminaproducts.com. Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M.(Central Time) Monday through Thursday and 8:00A.M. to 3:00 P.M. (Central Time) on Friday.Be sure to have the name and model number of the product available when you contact us.

THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY :

EQUIPMENT WARNING, CAUTION & NOTICE LABELS

This chart is provided to help identify the warning, caution, and notice labels on the STAMINA│X Water Rower. Please take a moment to familiarize yourself with all of the warnings, caution, and notice labels.

CAUTION LABEL(96)CAUTIONFor consumer use only. Failure to follow all warnings and instructions could result in injury or property damage. Before assembling or using this product, read and follow the Owner’s Manual and all other warnings and instructions that accompany this product. Replace this caution label if damaged, illegible, or removed.Keep others including children & pets away from equipment when in use.Consult your physician before starting this or any exercise program. This is especially important if you are over the age of 35 or have any pre-existing health condition.Always make sure all nuts and bolts are securely tightened before using this product. This product should not be used by a person weighing more than 250 lbs. unless otherwise stated in your Owner’s Manual.

SERIAL DECAL(97)GUARANTEED PERFORMANCECustomer Care1 (800) 375-7520Mon-Thurs • 7:30am – 5pm, Fri • 8am – 3pmCST FAX: (417) 889-8064www.staminaproducts.comMADE IN CHINAModel #Serial #051 442C

To best serve you, our Customer Care Representatives will need your serial number. For quick access, write in your serial number on the cover of the manual.

HARDWARE IDENTIFICATION CHART

This chart is provided to help identify the hardware used in the assembly process. Place the washers or the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to check the length of the bolts and screws.

NOTICE: The length of all bolts and screws, except those with flat heads, is measured from below the head to the end of the bolt or screw.Flathead bolts and screws are measured from the top of the head to the end of the bolt or screw.After unpacking the unit, open the hardware bag and make sure that you have all the following items.Some hardware may be already attached to the part.

Part Number and Description  Qty
63 Bolt, Button Head (M10 x 1.5 x 115mm) 1
65 Bolt, Button Head (M10 x 1.5 x 55mm) 2
75 Bolt, Button Head (M6 x 1 x 15mm) 6
76 Bolt, Round Head (M5 x 0.8 x 10mm) 2
81 Lock Washer (M10) 2
82 Washer (M10) 3
86 Acorn Nut (M10 x 1.5) 2
87 Nylock Nut (M10 x 1.5) 1

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part, please go to staminaproducts.com under the Customer Care section and order the part needed, e-mail us at [email protected], or call us toll-free at 1-800-375-7520 (in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.Some product parts are fit tested at the factory to ensure proper fit and alignment. Marks in the paint may be noticeable but are not an indication of damage.STEP 1Refer to illustration A. Unfold the FRONT SUPPORT(2) away from the MAIN FRAME(1). Unfold the UPRIGHT(4) away from the RAIL(3).NOTE: Refer to the detailed view of illustration A. When unfolding the UPRIGHT(4), ensure the STRAP(50) is centered on IDLE ROLLER(32) and pulls smoothly after assembly.STEP 2Refer to illustration B. Bolt the FRONT SUPPORT(2) to the MAIN FRAME(1) with BUTTON HEAD BOLT(M10x1.5x115mm)(63), WASHER(M10)(82), and NYLOCK NUT(M10x1.5)(87). Attach theUPRIGHT(4) to the FRONT SUPPORT(2) with BUTTON HEAD BOLT(M10x1.5x55mm)(65).

STEP 3There is an “L” decal on the left PEDAL CAP(43L), and an “R” decal on the right PEDAL CAP(43R).Insert the PEDAL SHAFT(12) through the tube located on the FRONT SUPPORT(2). Slide the right PEDAL CAP(43R) onto the right side of the PEDAL SHAFT(12) and make it ride on the Rack on the FRONT SUPPORT(2). Slide the left PEDAL CAP(43L) onto the left side of the PEDAL SHAFT(12) and make it ride on the Rack on the FRONT SUPPORT(2). Then secure the PEDAL CAPS(43R, 43L) with WASHERS(M10)(82), LOCK WASHERS(M10)(81), and ACORN NUTS(M10x1.5)(86) at both ends of the PEDAL SHAFT(12). You need to use two Combination Wrenches to tighten the ACORN NUTS(M10x1.5) (86) at both ends of the PEDAL SHAFT(12) at the same time.

STEP 4Attach the SEAT(39) to the SEAT CARRIAGE(10) with BUTTON HEAD BOLTS(M6x1x15mm)(75).STEP 5Attach the HANDLEBAR HOLDER(45) to the UPRIGHT(4) with BUTTON HEAD BOLTS(M6x1x15mm)(75). Place the HANDLEBAR(5) onto the HANDLEBAR HOLDER(45).STEP 6Install two AAA batteries into the METER(54), the batteries are not included. See page 14 for detailed battery installation instructions. Attach the METER(54) to the METER PLATE(6) with ROUND HEAD BOLTS(M5x0.8x10mm)(76). Plug the SENSOR WIRES(55) into the connecting wires of the METER(54), and push the excess wires back into the UPRIGHT(4).

OPERATIONAL INSTRUCTIONS

HEART RATE TRANSMITTERThe STAMINA│X Water Rower can measure how hard you are exercising by monitoring your heart rate with the HEART RATE TRANSMITTER(98). Your heart rate reading gives you a snapshot of how hard your heart is working at that point in your workout by measuring the number of heartbeats per minute.The HEART RATE TRANSMITTER(98) worn around your chest sends your heart rate information to a receiver inside the METER(54) so your heart rate is tracked while you exercise. This is the most reliable way to measure your heart rate to make sure you are exercising within your target heart rate zone so you get the most out of your workout time.Using the Heart Rate Transmitter Chest StrapThe HEART RATE TRANSMITTER(98) worn around the chest is powered by a BUTTON BATTERY (CR2032)(102) located in the back of the HEART RATE TRANSMITTER(98). Two electrodes on ELASTIC SENSOR STRAP(99) monitor your heartbeat, and the adjustable ELASTIC SENSOR STRAP(99) holds the transmitter in place. The receiver built into the STAMINA│X Water Rower picks up your heart rate from the HEART RATE TRANSMITTER(98) and displays it on the monitor during your workout.

To assemble the HEART RATE TRANSMITTER(98), insert the BUTTON BATTERY(CR2032)(102) as shown in the illustration. Place the BATTERY RUBBER RING(100) on the edge of the opening and place the BATTERY COVER(101) over the BUTTON BATTERY(CR2032)(102). Using a coin or similar object, press down on the BATTERY COVER(101) and turn to securely close the cover.NOTE:

  1. Make sure to close the BATTERY COVER (101) very tightly as illustrated to prevent sweat and moisture from damaging the battery.
  2. The HEART RATE TRANSMITTER(98) is latex-free and its material is appropriate for human contact.

Refer to the illustration. Press the HEART RATE TRANSMITTER(98) onto the buttons on the ELASTIC SENSOR STRAP(99).To wear the HEART RATE TRANSMITTER(98) around the chest, hook the hook end of the ELASTIC SENSOR STRAP(99) to the other end of the ELASTIC SENSOR STRAP(99). Adjust the ELASTIC SENSOR STRAP(99) to fit your chest snugly as shown in the illustration below. Apply water or conductive gel to moisten the heart rate sensor electrodes. These heart rate sensor electrodes must be wet and in contact with your chest skin to properly detect your heart rate.

NOTE: If your heart rate is inconsistent or not tracking on your workout monitor, do the following:

  • The HEART RATE TRANSMITTER(98) will connect to the monitor while using the unit and within close proximity of the unit. If you are too far from the unit the connection will be lost.
  • Moisten the heart rate sensor electrodes on the back of the ELASTIC SENSOR STRAP(99) and make sure they are in contact with the skin. Your skin may be dry when you begin your workout and moisture is necessary to ensure contact. As you sweat, contact will improve.
  • Tighten the elastic strap so it remains in place as you exercise. Movement of the heart rate sensor electrodes will result in inaccurate or erratic signals and readings.
  • Clean the heart rate sensor electrodes as dirt can interfere with transmission. Use a mild soap and water and dry with a soft towel.

Transmitter Care and Maintenance

  • Wash regularly with mild soap and water solution and dry with a soft towel being careful not to scratch the heart rate sensor electrodes.
  • Store in a cool, dry place. Make sure the heart rate sensor electrodes aren’t stored with any wet material and never store a wet transmitter in non-breathable material like a plastic bag or sports bag.
  • Do not stretch the heart rate sensor electrodes.

NOTE: The frequency of the receiver built into the STAMINA│X Water Rower is 5 kHz. All compatible heart rate transmitters from other companies will work with the STAMINA│X Water Rower.

USING THE FITNESS METER

POWER ON: Move the handlebar or press any button.POWER OFF: Automatically shuts off after 4 minutes of inactivity.FUNCTION BUTTONS :

MODE: In the setting mode, press and release to select each function for preset target values for COUNT, DISTANCE, TIME, and CALORIES.Press and release to select functions for display for COUNT, DISTANCE, RPM, TIME, CALORIES, and PULSE.In the setting mode, press to set target values. Press the button and hold it down for two seconds, the meter willSET: continue to add the values, release the button to stop.RESET: In the setting mode, press the button to reset the setting values to zero.Press the button and hold it down for two seconds to reset all functions to zero.FUNCTIONS:SCAN: Automatically scans COUNT, DISTANCE, RPM, TIME, CALORIES, and PULSE in sequence with a change every six seconds. Press and release the MODE button until “SCAN” appears on display.COUNT: Displays the total number of strokes you have taken from zero to 9999 strokes. Counts down from preset value.DISTANCE: Displays distance from zero to 9999 meters. Counts down from preset value.RPM: Displays the rotation per minute from zero to 9999.TIME: Displays the time from 1 sec. up to 99:59 minutes. Counts down from preset value.CALORIES: Displays the calories burned from zero to 9999 Kcal. Counts down from preset value.The calorie readout is an estimate for an average user. It should be used only as a comparison between workouts on this unit.PULSE: Displays the heart rate, from 40 to 240 beats per minute.To use this function, you must wear the HEART RATE TRANSMITTER(95) around your chest so the receiver which is built into the rower registers your heart rate from the HEART RATE TRANSMITTER(95) for displaying. Each heart rate signal will be accompanied byone “ ♥“ symbol flash.NOTE: The HEART RATE TRANSMITTER(95) is not a medical device. Maintaining a consistent signal can be difficult due to the varying distances experienced during the rowing stroke.The pulse function is a great tool to optimize your workout but should be used as a reference only.

PRESET VALUES OPERATION:You can pull on the HANDLEBAR(5) to power on the meter and work out with the meter directly. Or, you can preset the function values for counting down. Press and release the MODE button until “SCAN” does not appear on display, the meter will enter setting mode. Use SET and RESET buttons to input the values, and press the MODE button to confirm. Or, just press the MODE button to skip the setting and move on to the next function. After all the desired settings are chosen, begin pulling on the HANDLEBAR(5) to start the workout.Count (10 to 9990)→Distance (100 to 9900 meter)→Time (1:00 to 99:00)→Calories (10 to 9990 Kcal)NOTE:

  1. You may preset values for several functions. The preset function values will start to count down. When you complete one of the preset functions, the value of this completed function will start to count up, while the other preset functions will continue to count down.
  2. The Meter will shut off automatically after 4 minutes of inactivity. All function values will be kept. You can continue to work out with these function values. Or, press the RESET or MODE button and hold it down for two seconds to reset all functions to zero.

HOW TO INSTALL AND REPLACE BATTERIES:

  1. Open the Battery Door on the back of the meter.
  2. The meter operates with two AAA batteries (1.5V each), the batteries are not included. Refer to the illustration to install or replace the batteries.

NOTE:

  1. Do not mix a new battery with an old battery.
  2. Use the same type of battery. Do not mix an alkaline battery with another type of battery.
  3. Rechargeable batteries are not recommended.
  4. Ultimate disposal of batteries should be handled according to all state and federal laws and regulations.
  5. Do not dispose of batteries in a fire.

HOW TO FILL AND EMPTY THE TANK

  1. Remove the FILL PLUG(21) from the UPPER TANK(18).
  2. To fill with water, refer to illustration C. Place the FUNNEL(95) into the tank. Use a water cup, or the SYPHON PUMP(94), and a bucket to fill the tank. Use Water Level Gauge on the side of the tank to measure the volume of water in the tank to the desired level.
  3. To empty the tank, refer to illustration D. Place a bucket next to the rower. Use the SYPHON PUMP(94) to pump out the water from the tank into the bucket.
  4. Once completed, insert the FILL PLUG(21) into the UPPER TANK(18). Please wipe excess water from the frames after filling.

NOTE:

  1. Fill the tank with municipal water, do not use well water. If municipal water is unavailable, use distilled water. Refer to the Maintenance section for recommendations on water treatment.
  2. The water in the tank is not for human or animal consumption. Please dispose of the water properly after removal from the tank.

WATER LEVELRefer to the detailed view of illustration C. The Water Level Gauge is positioned on the side of the tank.The maximum level to fill the tank is Level 7. DO NOT fill above the Maximum Level – this could void the warranty. The standard calibration level is Level 6.The amount of resistance is dictated by the amount of water in the tank. For example, Level 2 of water offer light resistance, Level 6 offers the heaviest resistance.

STORAGE

  1. To store the STAMINA│X Water Rower, simply keep it in a clean dry place.
  2. To avoid damage to the electronics, remove the batteries before storing the STAMINA│X Water Rower for one year or more.
  3. Move the STAMINA│X Water Rower with the moving wheels on the back of the MAIN FRAME(1).Grasp the stabilizer of the FRONT SUPPORT(2) to move the STAMINA│X Water Rower. Do not use the SEAT(39) to move the STAMINA│X Water Rower. The SEAT(39) will move and the SEAT CARRIAGE(10) may pinch your hand or fingers.
  4. Remove water from the tank if storing the rower for more than a month without use.

MAINTENANCE

The safety and integrity designed into the STAMINA│X Water Rower can only be maintained when the STAMINA│X Water Rower is regularly examined for damage and wear. Special attention should be given to the following:

  1. Sit on the SEAT(39) and pull on the HANDLEBAR(5) to verify that the Water System provides resistance and the seat travel is smooth and stable.
  2. Periodic maintenance is recommended to maintain the proper condition of the water in the tank. It is suggested to drain and clean the water tank every 4-6 months or refresh the water by adding a water purification tablet or granules. Water purification tablets or granules are commonly found at home centers or pool/ spa supply stores. These products must be Sodium Dichlor (Sodium Dichloroisocyanurate around 60%) and are sometimes called “Shock Treatment” – follow all manufacturer’s recommended instructions for use. NEVER USE POOL CHLORINE (TRICHLOR 90% CHLORINE) OR CHLORINE BLEACH. The use of these products will void the warranty and damage the product.
  3. Clean the tank periodically. The water in the tank is not for human or animal consumption. Please dispose of the water properly after removal from the tank. DO NOT use methylated spirits, chlorates, bleach, or ammonia-based fluids. It is recommended that a 50/50 solution of vinegar and water (or similar) be used to clean the tank. The use of improper cleaning products will void the warranty and damage the product.
  4. Clean the roller tracks on the RAIL(3) with an absorbent cloth.
  5. Verify that the CAUTION LABEL(96) is in place and easy to read. Call Stamina Products immediately at 1-800-375-7520 for a replacement CAUTION LABEL(96) if it is missing or damaged.
  6. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
  7. Worn or damaged components shall be replaced immediately or the STAMINA│X Water Rower removed from service until the repair is made.
  8. Only Stamina Products supplied components shall be used to maintain/repair the STAMINA│X Water Rower.
  9. Keep your STAMINA│X Water Rower clean by wiping it off with an absorbent cloth after use.

TROUBLESHOOTING GUIDE

STRAP REPLACEMENTOver time, the STRAP(50) may become frayed or worn. If your STAMINA│X Water Rower is within the 90-day warranty, a replacement STRAP(50) is available by contacting Stamina Customer Care at [email protected]. If your STAMINA│X Water Rower is not under warranty, you can purchase a replacement STRAP(50).The following are instructions for removing the current STRAP(50) and installing the new STRAP(50).Please take a moment to read the caution posted on the rower inside the covers.CAUTIONRemove tension by detaching the bungee cord from the bottom of the unit prior to working with the strap bungee pulley.See manual or call Customer Care for more information.

Unhook the Bungee Cord(51) from the hook located at the bottom of the rower. Cut off the Bungee Cord(51) as close as possible to the Bungee Cord Tie. Remove the Rail(3) and Upright(4) from the Frame by removing the Bolts(70, 72, and 65).
Remove the Bolts(62) and remove the Mounting Bracket(7) from the Tank Brace(8). Unscrew the Bolt(118) to release the Strap(50) from the Strap/Bungee Pulley(27).

Slowly pull out the current Strap(50). Carefully rotate the Strap/Bungee Pulley(27) to release the Strap(50).

Run the new Strap(50) through the Upright(4) and Main Frame(1), turn it 90 degrees on the Idler Roller(32), then attach to the Strap/Bungee Pulley(27) with Bolt(118).

Place the Upright(4) on the Main Frame(1) as illustrated. Rotate the Strap/Bungee Pulley(27) enough to place the Handlebar(5) up against the Strap Pulley(31).
Run the Bungee Cord(51) through the Bungee Pulleys(37) as illustrated. Attach the Mounting Bracket(7) back to the Tank Brace(8) with Bolts(62).
Attach the Rail(3) and Upright(4) back the theFrame with Bolts(70, 72, and 65). Run the Bungee Cord(51) through the Bungee Pulleys(37). Secure the Bungee Cord(51) to the Frame with the Cable Ties as illustrated.

–

–

BUNGEE CORD REPLACEMENTOver time, the BUNGEE CORD(51) may become frayed or worn. If your STAMINA│X Water Rower is within the 90-day warranty, a replacement BUNGEE CORD(51) is available by contacting Stamina Customer Care at [email protected]. If your STAMINA│X Water Rower is not under warranty, you can purchase a replacement BUNGEE CORD(51).The following are instructions for removing the current BUNGEE CORD(51) and installing the new BUNGEE CORD(51).Please take a moment to read the caution posted on the rower inside the covers.CAUTIONRemove tension by detaching the bungee cord from the bottom of the unit prior to working with the strap bungee pulley.See manual or call Customer Care for more information.

Unhook the Bungee Cord(51) from the hook located at the bottom of the rower. Cut off the Bungee Cord(51) as close as possible to the Bungee Cord Tie. Remove the Rail(3) and Upright(4) from the Frame by removing the Bolts(70, 72, and 65).
Remove the Bolts(62) and remove the MountingBracket(7) from the Tank Brace(8). Use a Pliers to pull out the current BungeeCord(51).
Run the new Bungee Cord(51) through the Strap/Bungee  Pulley(27), and pull the Bungee Cord(51) to the end. Place the Upright(4) on the Main Frame(1) as illustrated. Rotate the Strap/Bungee Pulley(27) enough to place the Handlebar(5) up against theStrap Pulley(31).
Run the Bungee Cord(51) through the BungeePulleys(37) as illustrated.

Attach the Mounting Bracket(7) back to the TankBrace(8) with Bolts(62).
Attach the Rail(3) and Upright(4) back the theFrame with Bolts(70, 72, and 65). Run the Bungee Cord(51) through the BungeePulleys(37). Secure the Bungee Cord(51) to theFrame with the Cable Ties as illustrated.

CONDITIONING GUIDELINES

How you begin your exercise program depends on your physical condition.If you have been inactive for several years or are severely overweight, start slowly and increase your workout time gradually. Increaseyour workout intensity gradually by monitoring your heart rate while you exercise.Remember to follow these essentials:

  • Have your doctor review your training and diet programs.
  • Begin your training program slowly with realistic goals that have been set by you and your physician.
  • Warm up before you exercise and cool down after you work out.
  • Take your pulse periodically during your workout and strive to stay within a range of 60% (lower intensity) to 90% (higher intensity) of your maximum heart rate zone. Start at the lower intensity, and build up to higher intensity as you become more aerobically fit.
  • If you feel dizzy or lightheaded you should slow down or stop exercising.

Initially, you may only be able to exercise within your target zone for a few minutes; however, your aerobic capacity will improve over the next six to eight weeks. It is important to pace yourself while you exercise so you don’t tire too quickly.To determine if you are working out at the correct intensity, use a heart rate monitor or use the table below. For effective aerobic exercise, your heart rate should be maintained at a level between 60% and 90% of your maximum heart rate. If just starting an exercise program, work out at the low end ofyour target heart rate zone. As your aerobic capacity improves, gradually increase the intensity of your workout by increasing your heart rate.

Measure your heart rate periodically during your workout by stopping the exercise but continuing to move your legs or walk around. Place two or three fingers on your wrist and take a six-second heartbeat count. Multiply the results by ten to find your heart rate. For example, if your six-second heartbeat count is 14, your heart rate is 140 beats per minute.A six-second count is used because your heart rate will drop rapidly when you stop exercising.  Adjust the intensity of your exercise until your heart rate is at the proper level.Target Heart Rate Zone Estimated by Age*

Age Target Heart Rate Zone (55%-90% of Maximum Heart Rate) Average MaximumHeart Rate 100%
20 years 110-180 beats per minute 200 beats per minute
25 years 107-175 beats per minute 195 beats per minute
30 years 105-171 beats per minute 190 beats per minute
35 years 102-166 beats per minute 185 beats per minute
40 years 99-162 beats per minute 180 beats per minute
45 years 97-157 beats per minute 175 beats per minute
50 years 94-153 beats per minute 170 beats per minute
55 years 91-148 beats per minute 165 beats per minute
60 years 88-144 beats per minute 160 beats per minute
65 years 85-139 beats per minute 155 beats per minute
70 years 83-135 beats per minute 150 beats per minute

* For cardiorespiratory training benefits, the American College of Sports Medicine recommends working out within a heart rate range of 55% to 90% of maximum heart rate. To predict the maximum heart rate, the following formula was used: 220 – Age = predicted maximum heart rate

WARM-UP and COOL-DOWN

Warm-Up The purpose of warming up is to prepare your body for exercise and to minimize injuries.Warm up for two to five minutes before strength training or aerobic exercising. Perform activities that raise your heart rate and warm the working muscles. Activities may include brisk walking, jogging, jumping jacks, jump rope, and running in placeStretching while your muscles are warm after a proper warm-up and again after your strength or aerobic training session is very important. Muscles stretch more easily at these times because of their elevated temperature, which greatly reduces the risk of injury. Stretches should be held for 15 to 30 seconds. Do not bounce.Suggested Stretching Exercises

Place feet shoulder-width apart and lean forward.Keep this position for 30 seconds using the body as a natural weight to stretch the backs of the legs.DO NOT BOUNCE!When the pull on the back of the legs lessens, gradually try a lower position.Bent Torso Pulls

While sitting on the floor, have legs apart, one leg straight, and one knee bent.Pull the chest down to touch the thigh on the leg that is bent, and twist at the waist. Hold this position for at least 10 seconds. Repeat 10 times on each side.Floor StretchWhile sitting on the floor, open the legs as wide as possible. Stretch the upper body toward the knee on the right leg by using your arms to pull your chest to your thighs. Hold this stretch 10 to 30 seconds.DO NOT BOUNCE!Do this stretch 10 times.Repeat the stretch with the left leg.Bent Over Leg Stretch

Stand with feet shoulder-width apart and lean forward as illustrated. Using the arms, gently pull the upper body towards the right leg.Let the head hang down.DO NOT BOUNCE!Hold the position for a minimum of 10 seconds. Repeat pulling the upper body to the left leg. Do this stretch several times slowly.Remember to always check with your physician before starting any exercise program.Cool-Down The purpose of cooling down is to return the body to its normal, or near-normal, resting state at the end of each exercise session. A proper cool-down slowly lowers your heart rate and allows blood to return to the heart.Your cool-down should include the stretches listed above and should be completed after each strength training session.

PRODUCT PARTS DRAWING

PARTS LIST

PART#  PART NAME  QTY PART#  PART NAME  QTY
1 Main Frame 1 61 Bearing (608zz) 10
2 Front Support 1 62 Bolt, Flat Socket Head (M6 x 1 x 10mm) 2
3 Rail 1 63 Bolt, Button Head (M10 x 1.5 x 115mm) 2
4 Upright 1 64 Bolt, Button Head (M10 x 1.5 x 105mm) 1
5 Handlebar 1 65 Bolt, Button Head (M10 x 1.5 x 55mm) 4
6 Meter Plate 1 66 Bearing Spacer 1
7 Mounting Bracket 1 67 Bolt, Button Head (M8 x 1.25 x 135mm) 2
8 Tank Brace 1 68 Bolt, Button Head (M8 x 1.25 x 110mm) 2
9 Impeller 1 69 Bolt, Button Head (M8 x 1.25 x 70mm) 1
10 Seat Carriage 1 70 Bolt, Button Head (M8 x 1.25 x 50mm) 4
11 Sensor Bracket 1 71 Bolt, Button Head (M8 x 1.25 x 30mm) 4
12 Pedal Shaft 1 72 Bolt, Button Head (M8 x 1.25 x 15mm) 10
13 Rail Shaft 1 73 Bolt, Button Head (M6 x 1 x 45mm) 2
14 Idle Roller Spacer 2 75 Bolt, Button Head (M6 x 1 x 15mm) 10
15 Roller Long Spacer 2 76 Bolt, Round Head (M5 x 0.8 x 10mm) 2
16 Roller Short Spacer 4 77 Stainless Screw, Round Head (M3 x 0.5 x 20mm) 12
17 Strap Pulley Spacer 2 78 Screw, Round Head (M4 x 16mm) 2
18 Upper Tank 1 79 Screw, Round Head (M4 x 12mm) 1
19 Lower Tank 1 81 Lock Washer (M10) 2
20 Rubber Ring Seal 1 82 Washer (M10) 5
21 Fill Plug 1 83 Washer (M8) 12
22 Fill Plug Seal 1 84 Washer (M6) 2
23 Lower Pad 4 85 Washer (M3) 24
24 Strap/Bungee Pulley Bushing 2 86 Acorn Nut (M10 x 1.5) 2
25 Plastic Washer (ø20.5 x ø40 x 2mm thick) 2 87 Nylock Nut (M10 x 1.5) 5
26 Shaft Retainer 1 88 Nylock Nut (M8 x 1.25) 11
27 Strap/Bungee Pulley 1 89 Nylock Nut (M6 x 1) 2
29 One-way Bearing (HF2016) 1 90 Stainless Nylock Nut (M3 x 0.5) 12
30 Spring Pin (ø6 x 40mm) 1 91 Large Washer (M8 x ø20mm) 2
31 Strap Pulley 1 92 Upper Pad (25mm x 25mm) 4
32 Idle Roller 3 93 Impeller Seal 1
33 Round Plug (ø20mm) 1 94 Siphon Pump 1
34 Seat Roller 4 95 Funnel 1
35 Lower Seat Roller 2 96 Caution Label 1
36 Moving Wheel 2 97 Serial Decal 1
37 Bungee Pulley 4 98 Heart Rate Transmitter 1
39 Seat 1 99 Elastic Sensor Strap 1
40 Rail Bushing (ø16 x ø31.8 x 12.5mm) 2 100 Battery Rubber Ring 1
41 Meter Plate Bushing (ø8.2 x ø27 x 10mm) 2 101 Battery Cover 1
42 Stopper 4 102 Button Battery (CR2032) 1
43 Pedal Cap 2 103 Allen Wrench (4mm) 1
44 Pedal Strap 2 104 Allen Wrench (6mm) 1
45 Handlebar Holder 1 105 Combination Wrench 2
46 Endcap (30mm x 70mm) 4 106 Manual 1
47 Rectangular Plug (40mm x 100mm) 2 107 Roller Spacer (ø8.1 x ø10 x 13mm) 2
48 Rectangular Plug (30mm x 60mm) 2 108 Tank Seal 1
49 Round Plug (ø28.6mm) 2 109 Foam Spacer 1
50 Strap 1 110 Bungee Pulley Spacer (ø8.1 x ø12 x 6.5mm) 8
51 Bungee Cord 1 111 Bolt, Button Head (M8 x 1.25 x 28mm) 2
52 Needle Roller Bearing (HK2010) 2 112 Rubber Strap 1
53 Hand Grip 2 113 Bumper 2
54 Meter 1 114 EVA Pad 1
55 Sensor Wire 1 115 Screw, Round Head (M5 x 15mm) 6
56 Sensor Holder 1 116 Screw, Round Head (M5.5 x 15mm) 2
57 Magnet 1 117 Stainless Washer 1
58 Grommet 1 118 Bolt, Round Head (M5 x 0.8 x 30mm) 1
59 Stand 4
60 Bearing (6000zz) 6

LIMITED WARRANTY

MODEL 35-1442C

WARRANTY

Stamina Products, Inc. (“Stamina”) warrants to the original purchaser that this product will be free from defects in materials and workmanship that arise under normal use, service, proper assembly, and proper operation in accordance with product warnings/instructions for a period of 90 days on the parts and three years on the frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL NOT APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE, ABUSE, MISUSE, ALTERATION OF ANY KIND, OR TO ANY DEFECT OR CHANGE CAUSED BY IMPROPER ASSEMBLY, REPAIR, REPLACEMENT, SUBSTITUTION, OR USE WITH PARTS NOT PROVIDED BY STAMINA. Commercial use includes the use of products in athletic clubs, health clubs, spas, gyms, and all other public or semipublic facilities whether or not the product’s use is in furtherance of a profit-making enterprise and all other use which is not for personal purposes.To implement this limited warranty, send a written notice stating your name, date, and place of purchase and a brief description of the defect along with your receipt to Stamina Products, Inc. 2040 N Alliance Ave, Springfield, Missouri, USA, MO 65803, or email us at [email protected], or call us at 1-800-375-7520. If the defect is covered under this limited warranty, you will be requested to returnthe product or part to us for free repair or replacement at our option.NO ACTION FOR BREACH OF THIS LIMITED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER THE DATE THE ALLEGED BREACH WAS OR SHOULD HAVE BEEN DISCOVERED. NO ACTION FOR BREACH OF ANY IMPLIED WARRANTY (INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER DELIVERY OF THE PRODUCT TO THE PURCHASER. These warranties are not transferable. IF ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED WARRANTY OR ANY IMPLIED WARRANTY, THE REMEDY OF REPAIR OR REPLACEMENT IS THE EXCLUSIVE REMEDY. If any claim is made under this limited warranty or any implied warranty, Stamina reserves the right to require the product to be returned for inspection, at the purchaser’s expense, to Stamina’s premises in Springfield, Missouri. Return of the enclosed warranty registration card is not required for warranty coverage but is merely a way of establishing the date and place of purchase.Stamina SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS OR ANY OTHER INDIRECT, CONSEQUENTIAL, SPECIAL OR INCIDENTAL DAMAGES DUE TO BREACH OF THE ABOVE WARRANTY OR ANY IMPLIED WARRANTY.THIS LIMITED WARRANTY IS THE ONLY EXPRESS WARRANTY. NO ORAL OR WRITTEN INFORMATION GIVEN BY STAMINA, ITS AGENTS OR EMPLOYEES, SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY. This warranty gives you specific legal rights, and you may also have other legal rights which vary from state to state. ANY OTHER RIGHT WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.The laws in some states affect the disclaimer or limitation of implied warranties and consequential and incidental damages. If any such law is found applicable, the foregoing disclaimers and limitations of and on implied warranties and consequential and incidental damages shall be deemed to be modified to the extent necessary to comply with applicable law.

NOTES

TO CONTACT CUSTOMER CARE For your convenience, Stamina’s customer care representatives can be reached by email at [email protected] or by phone at 1-800-375-7520 (in the U.S.). Our customer care representatives are available Monday through Thursday from 7:30 a.m. until 5:00 p.m., and Friday 8:00 a.m. until 3 p.m. Central Time.

ONLINECUSTOMER CARE[email protected]www.staminaproducts.com

TELEPHONECUSTOMER CARETel: 1 (800) 375-7520

FAXCUSTOMER CAREFax: (417) 889-8064

MAILSTAMINA PRODUCTS, INC.ATTN: Customer Care2040 N Alliance Ave, Springfield, MO 65803

Would you like to receive email information or special offers from Stamina Products?Register at contact.staminaproducts.com TO REGISTER YOUR PRODUCTTo enact your warranty, please register your product by going to register.staminaproducts.com. Please have your product model number (printed on the cover of this owner’s manual) and the serial number (printed on the black and white sticker on your product) ready.If you don’t have internet access, you can call customer care at 1-800-375-7520, or fill out and mail the product registration form below to Stamina Products, Inc.; 2040 N Alliance Ave, Springfield, MO 65803.

PRODUCT REGISTRATION FORM

Stamina Products, Inc.2040 N Alliance Ave, Springfield, MO 65803

Model Number: ……….Product Name: …………Place Purchased: ……….Date of Purchase: ……..First Name: ……………….Purchase Price: …………..Last Name: …………………City: ……………………………State: …………………………Zip Code: …………………..Email Address: …………..Phone #: ( ) ………………..

Would you like to receive email information or special offers from Stamina Products?* ____Yes ____No *If yes, be sure your email address is included above.

Detach and Mail or Fax the Form Above

TO ORDER PARTSIf there are missing or damaged parts, you can go to parts.staminaproducts.com and order those parts. If you have questions, please contact customer care. Do not return the product. To order parts by mail, fill out the sheet below and fax it to 417-889-8064. The part will be mailed to your address.

Detach and Mail or Fax the Form Below

PARTS ORDER FORM

Stamina Products, Inc.2040 N Alliance Ave, Springfield, MO 65803

Mr./Ms: ……………..Address: …………….City: ……………………Apt. #:…………………State: …………………..Zip Code: …………….IMPORTANT: We require your phone number to process the order!Phone #: ( ) ………..Work Phone #: ( ) ….Date of Purchase:Model #: ………………Purchased From: …..IMPORTANT: Before filling out the portion below, make sure you have the correct information.Refer to the parts list to make sure you’re ordering the right parts!

PART # DESCRIPTION

QUANTITY

EXAMPLE:1

 Rear Unit Assembly

1

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,