Staples UN59460 FlexFit Hyken Mesh Chair Installation Guide

Hyken ChairUN59460 | UN59462 | UN59464UN59460V | UN59462V | UN59464V


Hyker chair

Easy assembly.

Union & ScaleTM is leading the way in taking some of the stress and frustration out of furniture assembly.

More logical instructions. No more “huh?” moments — we develop our instructions to have the right amount of detail you’ll need for easy assembly.

We’re here to help. If you’re confused during any step of the process, just call the number located at the bottom of the instructions pages. You’ll get help from a friendly representative.

Need help with assembly?Questions?Call our Product Support experts8:00 am­8:00 pm, Eastern Time1-800-270-9557

Furniture that works for you.Your business has its own unique personality.

At Union & ScaleTM, we’ll help bring it to life through furniture and décor that looks great and connects perfectly with you and your team.

Union & ScaleTM provides solutions that enable people and organizations to perform at their best.

We stand behind our products and materials. If for any reason a Union & ScaleTM product does not meet the performance expectations, please contact us at 1-800-270-9557.

Sit down on the job in custom comfort.No two people are alike. But no matter what your body is built like, there’s one chair that’s built for everyone’s comfort – a Union & Scale chair! Take a look at the diagram below. It’s packed with features that make it easy to fine-tune the comfort to meet your unique needs.

Product Features

Seat Height AdjustmentSeat height adjusts to  assure correct posture and relieves stress on back, thighs and legs. Lumbar Support AdjustmentAdded cushioning in chair back provides maximum support to lower back.
Upright Seat Tilt LockSimple locking mechanism fixes seat in upright position to assure healthy posture. Arm Height AdjustmentArms adjust up and down or swivel to ease pressure on neck and support shoulders.
Tilt TensionEasy adjustment of chair flexibility avoids heavy pushing and relaxes muscles.

Features Instructions

Seat Height Adjustment• To raise the seat: lean slightly forward while seated to relieve the pressure on the tilt mechanism.• Reach under the right side of the chair and locate the handle.Raise yourself up slightly to allow the chair to reach your desired height.• To lower the seat: remain seated and lift the handle upwards until the chair lowers to your desired height.
Variable Position Tilt Lock• Pull up on the handle located underneath the left side of the seat.• Adjust the back to your desired angel, then push the handle down• to lock the back into position.
Tilt Tension• Grasp the round cylinder knob under the front center of the seat.• For firmer/stiffer-turn chockwise.• For softer/looser – turn counter clockwise.
Lumbar Support Adjustment• Slide the lumbar support up or down to the desired location.
Headrest Angle Adjustment• The headrest rotates forward and back by 15 degrees.• Hold the headrest and rotate forward or back to desired angle.• The headrest raises and lowers hold the back of the chair and lift the headrest up to raise; push down to lower.
Arm Height Adjustment• Press the buttons on the chair arms to allow the arms to move up  or down freely.• Release the buttons once the desired height is reached.

Included Parts

Tools ProvidedChair bolts, screws and knobs may loosen during use. Please tighten your chair’s hardware each month.

Each piece of hardware needed for each step is located in the corresponding segment in your Easy Parts Pack.

6 To secure seat into base, sit down on chair. See easy adjustment instructions to ensure custom comfort.

Behold, the finished product.


Worklife Brands warrants to the original purchaser of this Union & ScaleTM Chair against defects in design, assembly, material, or workmanship for 7 years from the original date of purchase. In the event of a defect in the design, assembly, materials or workmanship of this product within 7 years from the original date of purchase, Worklife Brands will replace any such defective part. Parts included under this warranty are non-moving metal components, chair frame, pneumatic cylinder, upholstery and all other parts. To claim your replacement parts, contact product support at 1-800-270-9557. Original receipt or proof of purchase is required to obtain replacement parts. This warranty is based on up to 3-5 hours of continual use within a 24-hour period for users weighing up to 275 lbs. (124 kgs).Claims under this limited warranty or any implied warranty shall be limited to replacement of 100% of the chair or refund of purchase price at Worklife Brands’ sole option.This warranty does not apply to normal wear or damage from misuse, abuse, improper storage or handling, installation, accident, repair or alteration or other circumstances not directly attributable to manufacturing or material defects.THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED. STAPLES SPECIFICALLY DISCLAIM ANY AND ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL STAPLES BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES (SUCH AS BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) RELATED TO THIS PRODUCT.This warranty gives you specific legal rights, and you may also have other rights that vary depending upon the state, province, territory or country. Some states, provinces and territories do not allow the exclusion or limitation of incidental or consequential damages or limitation on how long an implied warranty lasts.Except as stated herein, no other warranties shall apply.

Product Support 1-800-270-9557

report this ad


[xyz-ips snippet=”download-snippet”]