Star Echo PT0148C2S 10 ft. W x 13 ft. D Steel Patio Gazebo Installation Guide

Star Echo PT0148C2S 10 ft. W x 13 ft. D Steel Patio Gazebo

Thank you for your purchase!

We are pleased that you have chosen StarEcho for your outdoor gazebo purchase. We hope that you enjoy the unmatched quality, comfort, and style of your new patio item. Every piece is meticulously considered all the way down to the smallest details, exclusively for you, by our world class design team. We know you have a choice when it comes to your patio gazebo needs, so from our team to yours, thank you for letting us be a part of your outdoors.

SAFE INFORMATIONS

WARNING:

• When assembling and using this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Please read all instructions before assembly and usage.
• Some parts may contain sharp edges, wear protective gloves if necessary.
• This unit is heavy! Do not assemble this item alone. At least two or more people are recommended for safe assembly.
• Keep all children and pets away from assembly area.
• Begin assembly not less than 6 feet from any obstruction such as fence, garage, house, overhanging branches, laundry line or electrical wires.
• Install on level ground. This gazebo cannot be permanently staked or attached to concrete floor or platform. The provided stakes are for soft ground use only. If assembling on a hard surface like a deck or concrete, other forms of attachment must be used such as expansion bolts that can be purchased locally.
• This gazebo is intended for decorative and sunshade purposes only and is not meant to withstand inclement weather including high winds, rain and snow. Gazebo fabric is water resistant, not water proof and may leak during exposure to precipitation.
• Please lay out all parts before assembling, checking to make sure all parts are there. If any parts are missing, please email and parts will be expedited to you.
• Do not leave the gazebo where there is a risk of high wind, as possible damage will occur to the structure. Remove all excess snow from the roof.
• Do not climb on top of the gazebo. Falling off the gazebo can result in serious injury.
• KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS GAZEBO FABRIC. This Gazebo is made with fabric that meets CPAI-84 specifications for flame resistance. It is not fire proof. The fabric will burn if left in continuous contact with any flame source. The application of any foreign substance to the gazebo fabric may render the flame-resistant properties ineffective

Parts List

Parts Nam	Item No	Parts Images	Qty
Top Leg Post	A1		4
Lower Leg Post	A2		4
Short Side Beam 1	C1		2
Short Side Beam 2	C2		2
Long Side Beam	D1		4
Long Side Middle Beam	D3		2
Upper Slant Ba	G1		4
Lower Slant Bar	G2		4
Upper Top Bar	H1		4
Lower Top Bar	H2		4
Long Extension Tube	K5		4
Short Extension Tube	K4		4
Side Netting Rod	E1		4
Middle Netting Rod	E2		2
Top Connector	J		2
Top Connect Bar	T1		1
Big Roof Connector	T2		1
Big Canopy	O1		1
Small Canopy	O2		1
Netting	P1		4
Bolt M6x15mm	AA		2
Bolt M6x18mm	BB		22
Stake	II		8
Ring	LL		36

Needed for assembly: (The following tools are not included)

Step 1: Connect two Long Side Beams (D1) to Long Side Middle Beam (D3) by Bolt (BB).

Step 2: Connect Upper Leg Post (A1) to assembled Long Side Beam (D1) by Bolt (BB).

Step 3: Connect Short Side Beam 1/2 (C1/C2) to assembled Top Leg Post (A1) by Bolt (BB).

Step 4: Connect assembled Short Side Beam 1/2 (C1/C2).

Step 5: Insert Side Netting Rod (E1) into Middle Netting Rod (E2); Attach assembled Netting Rod to Long Side Beam (D1) by Bolt (BB).

Step 6: Connect Top Connector (J) and Top Connect Bar (T1); Attach Big Roof Connector (T2), locking by Bolt (AA).

Step 7: Insert Upper Slant Bar (G1) into Lower Slant Bar (G2); Insert Upper Top Bar (H1) into Lower Top Bar (H2).

Step 8: Attach Upper Top Bar (H1) to Top Connector ( J); Attach Lower Top Bar (H2) to assembled Short Side Beam 1/2 (C1/C2) by Bolt (BB). (Attention: Assemble this step requires 2 persons, one of person fix top connector position.)

Step 9: Attach Upper Top Bar (H1) to Big Roof Connector (T2); attach Lower Top Bar (H2) to assembled Long Side Middle Beam (D3) and Middle Netting Rod (E2) together by Bolt (BB)

Step 10: If assembled Middle Netting Bar (E2) are in wrong direction, attach Middle Netting Rod (E2) to Long Side Middle Beam (D3) by one Bolt (BB).

Step 11: Insert Upper Slant Bar (G1) into Top Connector (J); connect Lower Slant Bar (G2) and Top Leg Post (A1).

Step 12: Put Big Canopy (O1) on frame.

Step 13: Insert Upper Slant Bar (G1) into Short Extension Tube (K4); Insert Lower Slant Bar (G2) into Long Extension Tube (K5).

Step 14: Put Small Canopy (O2) on top frame, fix four corners to Short Extension Tube (K4), then adjust tube to suitable length.

Step 15: Insert Lower Top Bar (H2) into edge pocket on Big Canopy (O1); Insert Long Extension Tube (K5) into Big Canopy (O1), fix four corners and adjust tube to suitable length

Step 16: Connect Lower Leg Post (A2) and Top Leg Post (A1). (Attention: this step require two persons).

Step 17: Hang Netting (P1) on Side and Middle Netting Rod (E1/E2) by Ring (LL).

Step 18: Fix assembled gazebo Lower Leg Post (A2) on the ground by Stake (II).

CARE AND MAINTENANCE

• Our steel components for garden accessories and furniture are treated with rust inhibiting paint that protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once these protective coatings are scratched. This is not a defect and thus not covered by the warranty.
• To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint. Should any scratching or damage occur, we recommend immediate touch‐up with rust inhibiting paint.
• Surface rust can also be easily removed with a very light application of common cooking oil. If surface oxidation (rusting) occurs and if no measure is taken to prevent this, the oxidation may start dripping on to deck or patio and caused damaging stains which may be difficult to remove.
• This can be prevented if the above-mentioned measures are taken to keep the product from oxidizing.
• Use damp cloth to wipe off the stains as quickly as possible.
• If necessary, wash with a mild solution of soap and water; rinse thoroughly and dry completely.
• Periodically check and ensure that all bolts are well‐tighten during use.

LIMITED MANUFACTURER’S WARRANTY

The item is warranted to be free from defects in workmanship and materials for a period of (1) year from the date of purchase, provided the item was factory-sealed at the time of purchase and is maintained with care and used only for personal, residential purposes. Should any manufacturing defect arise within this warranty period, Star Echo will replace (at our option) any defective merchandise or parts upon proof of purchase; however, transportation and delivery costs, as well as payments to a third party for assembly or disassembly of the item, remain the responsibility of the purchaser. A purchaser of an “open box,” previously-returned, or “clearance” item, as well as original purchasers outside of the warranty period, may obtain replacement parts from Star Echo for products in current production, at nominal cost.

EXCLUSIONS: Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof of purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser and is nontransferable. Any replacement of warranted items will be in the original style and color, or a similar style and color if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific rights, and you may also have other rights, which vary from state to state.