StarTech DK31C3HDPD USB-C 10Gbps and USB-A Triple 4K Monitor Hybrid Dock User Guide

Quick-Start Guide

USB-C™ 10Gbps & USB-A Triple 4K Monitor Hybrid Dock – DP and/or HDMI – 85W PD

Product Diagram (DK31C3HDPD and DK31C3HDPDUE)

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Requirements

Depending on your Host Laptop’s operating system, the required drivers will automatically be installed when the Docking Station is connected and powered on. For the latest drivers, requirements, instructions, and to view the full manual please visit: www.startech.com/DK31C3HDPD or www.startech.com/DK31C3HDPDUENote: If the drivers do not automatically install, navigate to the Support tab to locate the driver installation instructions and downloads.• (Optional) Screw Locking USB-C Cable x 1

Installation

Front Ports

1. Connect a USB-C Cable to your USB-C Mobile Device for charging. Connect the other end of the USB-C cable to the USB-C Charge Port on the Docking Station.
2. Connect a USB-A Cable to your USB-A Mobile Device for charging. Connect the other end of the USB-A Cable to the USB-A Charge Port on the Docking Station.
3. Connect a 3.5 mm Stereo Audio Cable to your Speakers or Headset. Connect the other end of the 3.5 mm Stereo Audio Cable to the Audio Input/Output Port on the Docking Station.

Rear Ports

1. Connect the USB-C Cable (with Attached USB-C to USB-A Adapter) to your Host Laptop’s USB-A or USB-C Port. Connect the other end of the USB-C Cable to the USB-C Host Port on the Docking Station.Note: If using a USB-A Connection from the Host Laptop, the Video 1 Ports will not work as they require DP Alt Mode.
2. Connect a DisplayPort or HDMI Cable to your DisplayPort or HDMI Enabled Display Device. Connect the other end of the DisplayPort or HDMI Cable to the Video 1 DisplayPort Port or Video 1 HDMI Port on the Docking Station.
3. Repeat step 2 to add additional DisplayPort or HDMI Enabled Display Device to the Video 2 and Video 3 Ports.
4. Connect a CAT 5e/CAT 6 Cable to your Network Device (e.g. Router, Switch, Modem, etc.) and to the RJ45 Port on the Docking Station.

For USB 3.1 Gen 2 Peripherals

1. Connect a USB-C Peripheral to the USB-C Peripheral Port on the Docking
2. Connect a USB-A Peripheral and to the USB-A Peripheral Port on the Docking

For USB 3.1 Gen 1 Peripherals

1. Connect a USB-A Cable to your USB-A Peripheral and to the USB-A Peripheral Port on the Docking Station.
2. Repeat step 1 to add a second USB–A Peripheral. Side Port

Connect a K-Slot Style Locking Device to the Lock Slot.

Note: Follow the manufacturer’s instructions when installing your Locking Device.

Powering the Docking Station

1. Connect the Universal Power Adapter to the DC Power Input Port on the Docking Station.
2. Connect the appropriate Power Cable to the Universal Power Adapter.
3. Connect the other end of the Universal Power Adapter to an AC Electrical Outlet.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.CAN ICES-3 (B)/NMB-3(B)This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

Warranty Information

This product is backed by a three-year warranty.For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Safety Measures

report this ad

• If product has an exposed circuit board, do not touch the product under power.

References

• 
  StarTech.com Support
• 
  StarTech.com | IT Pro\’s Trusted Source for Connectivity Accessories
• 
  Hybrid USB-C USB-A Dock – Triple 4K 60Hz – Laptop Docking Stations | StarTech.com
• 
  StarTech.com Warranty Policy
• 
  Hybrid USB-C USB-A Dock – Triple 4K 60Hz – Laptop Docking Stations | StarTech.com Europe
• 
  StarTech.com | IT Pro\’s Trusted Source for Connectivity Accessories
• 
  Hybrid USB-C USB-A Dock – Triple 4K 60Hz – Laptop Docking Stations | StarTech.com
• 
  StarTech.com Warranty Policy
• 
  Hybrid USB-C USB-A Dock – Triple 4K 60Hz – Laptop Docking Stations | StarTech.com Europe
• 
  StarTech.com Support