StarTech HB30C1A1CPD 2-Port USB 3.0 Hub with USB Power Delivery User Guide

Quick-Start Guide2-Port USB 3.0 Hub with USB Power Delivery

Product Diagram (HB30C1A1CPD)

Requirements

For the latest requirements, please visit www.startech.com/HB30C1A1CPD

• A laptop with a USB-C or Thunderbolt 3 port that supports Power Delivery (PD) 2.0 (If your laptop does not support PD 2.0, you can not use the hub to pass power through to a laptop).
• (Optional) A USB-C Power Adapter
• (Optional) An AC Electrical Outlet

Connecting the Hub to a Laptop (Bus Powered)

1. Connect the USB-C Connector on the Hub to a USB-C port on a Host Laptop.2. Connect a USB Peripheral to the USB-A Port on the Hub.3. Connect a USB peripheral to the USB-C Port on the Hub.

Connecting the Hub Using PD 2.0

Make sure that the USB-C port on the Host Laptop supports USB Power Delivery 2.0.

1. Connect the USB-C plug on the USB-C Power Adapter to the USB-C Port on the Hub.
2. Connect the USB-C Power Adapter to an AC Electrical Outlet.
3. Connect the USB-C Connector on the Hub to a USB-C port on a Host Laptop.
4. Connect a USB Peripherals to the USB-A Port on the Hub.

Troubleshooting

report this ad

I can not use the Hub to charge a Laptop

• To use the hub to power and charge your laptop, make sure that the USB-C port on your laptop supports USB Power Delivery 2.0.
• Some laptops require 60W or more to support USB Power Delivery 2.0. If your laptop requires 60W or more, you won’t be able to use the USB Power Delivery 2.0 feature.

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.Manual Revision: January 31, 2020 3:55 PM

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or  television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.Industry Canada StatementThis Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.CAN ICES-3 (B)/NMB-3(B)This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.Use of Trademarks, Registered Trademarks, and other Protected Names and SymbolsThis manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to  StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registeredtrademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Warranty InformationThis product is backed by a two-year warranty.For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.Limitation of LiabilityIn no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect,  special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.Safety MeasuresIf the product has an exposed circuit board, do not touch the product under power.

References

• 
  holders.fr
• 
  StarTech.com Warranty Policy
• 
  StarTech.com | IT Pro\’s Trusted Source for Connectivity Accessories
• 
  StarTech.com Support
• 
  Adapter, USB C to A & C – PD – USB 3.0 – USB 3.0 Hubs