StarTech PEX1P2 1 Port PCI Express Dual Profile Parallel Adapter Card User Guide

Quick-Start Guide

Port PCI Express® Dual Profile Parallel Adapter Card – SPP/EPP/ECP

Product Diagram (PEX1P2)

Front Angle View

Requirements

For the latest requirements, please visit: www.startech.com/PEX1P2.

• Computer with an available PCI Express slot (x1)

Tools

•  Small Phillips Head Screwdriver

Hardware Installation

Warning: Parallel Adapter Cards can be damaged by static electricity. Make sure that the Installer is properly grounded before they open the Computer Case or touch the Parallel Adapter Card. The Installer should wear an Anti-Static Strap when installing any computer component. If an Anti-Static Strap is not available, discharge any built-up static electricity by touching a large Grounded Metal Surface for several seconds. Only handle the Parallel Adapter Card by its edges and do not touch the gold connectors.

installing the Low Profile Bracket

By default, the Full Profile Bracket is attached to the Parallel Adapter Card. Depending on the system configuration it may be necessary to remove the Full Profile Bracket and replace it with the Low Profile Bracket (included).

1. Using a Small Phillips Head Screwdriver, remove the two Bracket Screws securing the Full Profile Bracket to the Parallel Adapter Card.
2. Align the Screw Holes on the Parallel Adapter Card with the Screw Holes on the Low Profile Bracket. Making sure the Parallel Adapter Card is sitting on top of the Screw Holes on the Low Profile Bracket.
3. Insert the Bracket Screws through the Parallel Adapter Card and into the Screw Holes on the Low Profile Bracket.
4. Using the Small Phillips Head Screwdriver, tighten the Bracket Screws, being careful not to over-tighten.

Installing the Parallel Adapter Card

1. Turn off the Computer and any Peripheral Devices that are connected (e.g. printers, external hard drives, etc.).
2. Unplug the Power Cable from the rear of the Computer and disconnect any Peripheral Devices that are connected.
3. Remove the Cover from the Computer Case.Note: Consult the documentation that came with the Computer for details about how to do this safely.
4. Locate an open PCI Express Slot (xl) and remove the corresponding Metal Cover Plate from the rear of the Computer Case. In most instances, the Metal Cover Plate is attached to the rear of the Computer Case with a single Save this Screw for the next step.
5. Gently insert the Parallel Adapter Card into the open PCI Express slot and fasten the bracket to the rear of the Computer Case using the Screw from step 4.
6. Place the Cover back onto the Computer Case.
7. Reconnect the Power Cable to the rear of the
8. Reconnect all of the Peripheral Devices that were disconnected in step
9. Connect an SPP/EPP/ECP Peripheral Device to the Parallel Port on the Parallel Adapter Card.

Software Installation

Driver InstallationYou can download the latest drivers from the StarTech.com website: www.startech.com/PEX1P2.Navigate to the Drivers/Downloads tab to locate the Drivers. Follow the instructions included with the Driver Files.

FCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for helpThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.

Industry Canada StatementThis Class B digital apparatus complies with Canadian ICES-003.CAN ICES-3 (B)/NMB-3(B)This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.Use of Trademarks, Registered Trademarks, and other Protected Names and SymbolsThis manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registeredtrademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

Warranty InformationThis product is backed by a two-year warranty.For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.Limitation of LiabilityIn no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees, or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceeds the actual price paid for the product.Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.Safety Measures• If the product has an exposed circuit board, do not touch the product under power.

References

• 
  1-Port Parallel PCIe Card/Printer LPT – Parallel Cards & Adapters
• 
  StarTech.com Warranty Policy
• 
  StarTech.com | IT Pro\’s Trusted Source for Connectivity Accessories
• 
  StarTech.com Support