Arctis 1 Xbox Headset Manual

Table of Contents

ARCTIS 1 WIRELESS FOR XBOX

PRODUCT INFORMATION GUIDE

WELCOME TO ARCTIS

Your new headset is the result of our unyielding pursuit of perfection for over 15 years. We poured our hearts into creating the best possible gaming headset by pushing the boundaries of sound quality, mic clarity, comfort, and style. Arctis is our glory; now go chase yours.

STEELSERIES ENGINE

Download SteelSeries Engine to customize your audio settings and to integrate with Engine Apps (like Discord): steelseries.com/engine

PACKAGE CONTENTS

Arctis 1 Wireless HeadsetUSB-C Wireless DongleUSB Charging CableUSB-C to USB-A Adapter CableClearCast Microphone

SYSTEM REQUIREMENTS // COMPATIBILITY

Xbox OnePCPlaystation 4Nintendo SwitchAndroid (with USB-C)While the Galaxy Note 10 is fully supported, older Samsung phones do not support chat functionality over USB

PRODUCT OVERVIEW

SETUP

XBOX ONE

Set the Mode Switch of the USB-C Wireless Dongle to Xbox.

WINDOWS, SWITCH, PS4

Set the Mode Switch of the USB-C Wireless Dongle to USB.

CHARGING

POWER ON/OFF

To power on the headset press and hold the Power Button for at least 2 seconds. You will hear a tone, and the power LED will illuminate.

To power off the headset press and hold the Power Button for at least 3 seconds

PAIRING

Note: The headset is already paired with the transmitter out of the box

Connect the USB-C wireless dongle to a Windows PC with SteelSeries Engine installed
Initiate wireless dongle pairing from Engine
With the headset off, press and hold the Power Button for 6 seconds
You will hear a tone when the pairing is completed

MICROPHONE

Microphone attachment

Position the microphone close to the corner of your mouth with the flat surface facing you

MULTIMEDIA CONTROL

REGULATORY

Europe – EU Declaration of Conformity

Hereby, SteelSeries ApS. declares that the equipment which is compliance with directive RoHS 2.0 (2015/863/EU), R.E.D (2014/53/EU), EMC Directive (2014/30/EU), and LVD (2014/35/EU) which are issued by the Commission of the European Community.

The full text of the EU declaration of conformity is available at the following internet address: https://steelseries.com/

Operating Temperature: 0 to + 40 °C

SteelSeries ApS. hereby confirms, to date, based on the feedback from our suppliers indicates that our products shipping to the EU territory comply with REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals – (EC) 1907/2006) compliance program. We are fully committed to offering REACH compliance on the products and posting accurate REACH compliance status for the all of products.

Frequency bands and Powers (Headset and Transceiver)

a. Frequency band(s) in which the radio equipment operates: 2.400–2.4835 GHz

b. Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates:

EIRP:л/4-DQPSK: 5.35dBm (Headset ANT 1)
EIRP:л/4-DQPSK: 4.26dBm (Headset ANT2)
EIRP:л/4-DQPSK: 7.14dBm (Transceiver)

c. Software Version: V1.03

WEEE

This product must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.

Safety Guideline for Lithium Battery

This battery must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.

“CAUTION!” Risk of explosion if battery pack is not replace by same type as specified by the manufacturer.

Please keep follow all listed important warnings and cautions below while using this battery pack to avoid any damage or hazard.

The battery polarity (+) and (-) shall not be connected and charged reversely. Risk of explosion if the battery polarity (+) and (-) is reversed.
Please keep this battery pack away from fire and high heat sources due to explosion might happen. Do not place your battery pack close to any heater or hot location.
This battery pack shall not be hit or impacted. This battery pack shall not be dealt with any sharp or keen objects either.
This battery pack shall not be exposed to moisture, dripping or splashing.
If any electrolyte flow out of this battery pack when touch the user’s eyes and skin, please seek medical advice immediately.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement:The device has been evaluated to meet general RF exposure requirement, the device can be used in portable exposure condition without restriction.

FCC Caution:Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter

Headset FCC ID: ZHK-HS00021Transceiver FCC ID: ZHK-HS00021TXX

Frequency bands and Powers (Headset and Transceiver)a. Frequency band(s) in which the radio equipment operates: 2.400 – 2.4835 GHzb. Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates:

Conducted Peak Power: л/4-DQPSK: 4.19 dBm (Headset ANT 1)
Conducted Peak Power: л/4-DQPSK: 3.85 dBm (Headset ANT 2)
Conducted Peak Power: л/4-DQPSK: 3.32 dBm (Transceiver)

c. Software Version: V1.03

Industry Canada Statement:

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

this device may not cause interference, and
this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios.

The County Code Selection feature is disabled for products marketed in the US/ Canada.

Radiation Exposure Statement:The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction.

SteelSeries Products and Australian Consumer Law

Our goods come with guarantees that cannot be excluded under Australian consumer law. You are entitled to a repair, replacement, or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Should your product be defective, you can make a claim under Australian consumer law.

SteelSeries will provide its own remedies equivalent to those remedies in the consumer guarantee provisions of the Australian Consumer Law at any time within 24 months of the date of purchase. For the avoidance of doubt, SteelSeries acknowledges that the Australian Consumer Law may provide for remedies beyond 24 months for a number of its products.

Summary of Australian statutory consumer guaranteesConsumer guarantees in relation to goods

The goods will be of acceptable quality, The goods will be fit for a particular purpose, The goods will match their description, The goods will match the sample or demonstration model, You have title to the goods, You have undisturbed possession of the goods, There are no undisclosed securities on the goods.

Consumer guarantees in relation to servicesWe will provide the services with due care and skill, The services will be fit for a particular purpose, The services will be provided within a reasonable time.For SteelSeries-branded goods, in addition to the above, we also guarantee that we will provide repairs or spare parts for a reasonable time. Under Australian consumer law, the remedy you are entitled to if a product fails to meet a consumer guarantee will depend on whether the failure to comply with the guarantee is major or minor.Minor failures to comply with a consumer guarantee can normally be fixed or resolved in a reasonable amount of time. In this case, the seller can choose to offer you a refund, replacement, repair or, in the case of services, resupply. If the seller does not fix the problem or takes too long, you may be able to get it fixed by someone else and recover the costs from the seller depending on the circumstances.

Remedies for major failure with goodsReturn the product and ask for a refund, Return the product and ask for an identical replacement, or one of similar value if reasonably available, Keep the product and ask for compensation for the drop in value caused by the problem.

Remedies for major failure with servicesCancel the contract and pay a reasonable amount for the work done, or seek a refund, For money already paid, keep the contract and negotiate a reduced price for the drop in value of the service — this may mean asking for some of your money back if you have already paid.

For goods, there is a major failure to comply with a consumer guarantee when:

You would not have purchased the product if you had known about the problem.
The product is significantly different from the description, sample or demonstration model you were shown.
The product is substantially unfit for its normal purpose and cannot easily be made fit within a reasonable time.
The product is substantially unfit for a purpose that you told the supplier about, and cannot easily be made fit within a reasonable time.
The product is unsafe.

For services, there is a major failure to comply with a consumer guarantee when:

You would not have engaged the service if you had known the nature and extent of the problem.
The service does not meet the reasonable expectations for that type of service, and the problem cannot be rectified within a reasonable time.
You told the supplier that you wanted the service for a specific purpose, which was not fulfilled, and the problem could not be easily rectified within a reasonable time.
You told the supplier that you wanted a specific result, yet the service and end result failed to meet your specifications and could not be easily rectified within a reasonable time.
The supply of the service has created an unsafe situation.

For information on Australian consumer laws, please visit Australian consumer law website at http://www.consumerlaw.gov.au.

Importer Name and Address: Ingram Micro Pty LTD / Level1, 61 Dunning Avenue. Rosebery NSW 2018

Telephone technical support: +61-2-9381-6000