AEROX 3 WIRELESSPRODUCT INFORMATION GUIDE
WELCOME TO AEROX 3
Your new mouse is the result of our unyielding pursuit of perfection for over 15 years. We poured our hearts into creating the best possible ultra lightweight gaming mouse, optimizing it for speed and performance. The SteelSeries Aerox 3 is engineered to get the fastest swipes, so you can beat the competition to the trigger. When milliseconds count, speed matters.
STEELSERIES ENGINE
To enjoy GameSense integration, program macros, and customize lighting effects and other mouse settings on your new Aerox 3 Wireless mouse, download SteelSeries Engine at steelseries.com/engine
PACKAGE CONTENTS
Aerox 3 Wireless MouseUSB Type-C to USB Type-A SuperMesh Data/Charging Cable (5’9”/1,8 m)USB Type-C Wireless DongleExtension AdapterProduct Information Guide
SYSTEM REQUIREMENTS / COMPATIBILITYPCMacXboxSTEELSERIES ENGINE SOFTWARE REQUIREMENTSPlatformsWindows 7+Mac OS X 10.13+160 MB of free hard drive space forinstallation
PRODUCT OVERVIEW
1 Left Trigger2 Right Trigger3 Scroll Wheel4 CPI Button5 Side Button 16 Side Button 2
SETUP
CONNECTING VIA 2.4 GHZ WIRELESS
1 Connect the Aerox 3 Wireless Dongle 11 to an available USB port on your device.2 Toggle the Wireless Mode Switch 8 to the “2.4 GHz” position.3 The mouse and dongle will automatically pair.4 To further customize your mouse, or re-pair a Wireless Dongle 11 download the SteelSeries Engine software from steelseries.com/engine
PAIRING VIA BLUETOOTH
1 Initiate Bluetooth pairing mode on your Bluetooth 5.0 or higher enabled device.2 Hold the CPI Button 4 and toggle the Wireless Mode Switch 8 to the Bluetooth position to turn on your mouse.3 The Mouse lighting will start blinking blue when searching for a connection.4 Select “Aerox 3 Wireless” on your Bluetooth-enabled device.
BATTERY LEVEL INDICATOR
The mouse lighting will flash yellow to notify you about battery life:
When charging, the lighting will flash green for 10 seconds, before resuming default lighting.
REGULATORY
Europe – EU Declaration of ConformityHereby, SteelSeries ApS. declares that the equipment which is compliance with directive RoHS 2.0 (2015/863/EU), R.E.D (2014/53/EU), EMC Directive (2014/30/EU), and LVD (2014/35/ EU) which are issued by the Commission of the European Community.The full text of the EU declaration of conformity is available at the following internet address: steelseries.comSteelSeries ApS. hereby confirms, to date, based on the feedback from our suppliers indicates that our products shipping to the EU territory comply with REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals – (EC) 1907/2006) compliance program. We are fully committed to offering REACH compliance on the products and posting accurate REACH compliance status for the all of products. Operating Temperature: 0 to + 40 ° C. Frequency bands and Powers (Mouse and Transceiver)a. Frequency band(s) in which the radio equipment operates:
- WIFI: 2.400 – 2.4835 GHzb. Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates:
- EIRP(2.4G): л /4-DQPSK: 3.17 dBm (Mouse)
- EIRP(BT): GFSK: 3.29 dBm (Mouse)
- EIRP(2.4G): л /4-DQPSK: 0.91 dBm (Transceiver)c. Firmware Version: V1.5.9 (Mouse); V1.2.7 (Transceiver)
WEEEThis product must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.TURKEY ROHS COMPLIANCERepublic of Turkey: In conformity with the EEE Regulation
Safety Guideline for the BatteryThis battery must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.
Federal Communication Commission Interference StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Radiation Exposure Statement:The device has been evaluated to meet general RF exposure requirement, the device can beused in portable exposure condition without restriction.FCC ID: ZHK-M00019 (Mouse)FCC ID: ZHK-M00019TX(Transceiver)Frequency bands and Powers (Mouse and Transceiver)a. Frequency band(s) in which the radio equipment operates: 2.400 – 2.4835 GHzb. Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates:
- Conducted Average Power/(2.4G): л /4-DQPSK: -1.0 dBm (Mouse)
- Conducted Average Power/(BT): GFSK: -0.95 dBm (Mouse)
- Conducted Average Power/(2.4G): л /4-DQPSK: -2.32 dBm (Transceiver)c. Firmware Version: V1.5.9 (Mouse); V1.2.7 (Transceiver)
More information and support from steelseries.com
Industry Canada StatementThis device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:1. this device may not cause interference, and2. this device must accept any interference, including interference that may cause undesired operation of the device.This Class B digital apparatus complies with Canadian ICES-003.The County Code Selection feature is disabled for products marketed in the US/ Canada.The appliance must not be exposed to splashes or drops of water and it should not be used as a support for any object filled with liquid, such as a vase.Radiation Exposure StatementThe device has been evaluated to meet general RF exposure requirements, The device can be used in portable exposure conditions without restriction.
“CAUTION!”RISK OF EXPLOSION IF BATTERY PACK IS NOT REPLACE BY SAME TYPE AS SPECIFIED BY THE MANUFACTURER.Please keep follow all listed important warnings and cautions below while using this battery pack to avoid any damage or hazard.1. The battery polarity (+) and (-) shall not be connected and charged reversely. Risk of explosion if the battery polarity (+) and (-) is reversed.2. Please keep this battery pack away from fire and high heat sources due to the explosion that might happen. Do not place your battery pack close to any heater or hot location.3. This battery pack shall not be hit or impacted. This battery pack shall not be dealt with any sharp or keen objects either.4. This battery pack shall not be exposed to moisture, dripping, or splashing.5. If any electrolyte flows out of this battery pack when touching the user’s eyes and skin, please seek medical advice immediately.
IC: 9638A-M00019 (Mouse)IC: 9638A-M00019TX (Transceiver)
SteelSeries Aerox 3 Ultra Lightweight Gaming Mouse User Manual – SteelSeries Aerox 3 Ultra Lightweight Gaming Mouse User Manual –
[xyz-ips snippet=”download-snippet”]