Alcove Bathtub with Apron
@SwissMadison#WellMadeForever
______________________________________________________________
www.swissmadison.com | 1-434-623-4766 | [email protected]
INSTALLATION INSTRUCTIONS
PRIOR TO INSTALLATION:
- Inspect bathtub to ensure no damages have occurred while in shipping.
- Observe all plumbing and building codes in accordance with your state and local requirements.
- All dimensions are nominal! Be sure to measure your bathtub prior to installation.
- The step-by-step guidelines in the installation instructions are a general reference. Should there be any discrepancies; Swiss Madison cannot be held liable. It is recommended to install all Swiss Madison products by hiring a licensed professional.
- Read installation and maintenance instructions thoroughly before installing. Be sure to use proper tools and always wear proper personal safety accessories for your protection.
- Two people are recommended to handle and install this product as it is fragile.
- Make sure all wood studs and supports are properly installed.
- Verify all the necessary plumbing is installed by a certified plumber.
- Floor drain and trap are not included.
If you have any questions or concerns please contact us:1-434-623-4766
SUGGESTED TOOLS & MATERIALS:
INCLUDED PARTS:
1. Rough-In
- Rough plumbing must be pre-installed by a certified plumber before installation.
- If floor drain-hole installation is needed, contact a certified plumber.
- Place tub at final desired location and verify floor drain and bathtub drain align.
Studs must be flush and square
2. Attach Cast Iron Bars
- Flip tub upside-down using a drop cloth to protect from damaging the tub.
- Use a level to verify the tub apron is vertical to the ground.
- Screw cast iron bar (flat end) into raised wood platform on bottom of tub.
- Repeat for all three supports.
3. Ensure Tub is Level
4. Mark & Pre-Drill Hole Locations
- Mark stud locations.
- Pre-drill Ø5 mm holes on top flange.
- If stud is not flush to flange, a shim should be used. This will fix any gaps to prevent cracking the flange.
5. Screw Into Place
- Lay mortar bed and carefully lower bathtub into predetermined location.
- Secure tub by screwing flange into the pre-drilled holes from step 4.
- Place drop cloth in bathtub and stand inside bathtub to press it into floor when securing to wall studs.
6. Install Plumbing Fixtures
- Once your bathtub is in place, securely fasten and connect your waste and overflow then check for leaks. Standard 1 ¹⁄2″ waste and overflow sold separately.
- Use latex/acrylic sealant, gasket or non-staining plumber’s putty to seal between drain and bathtub.
1-434-MADISON(623-4766)19 Stults RoadDayton, NJ 08810
ONE YEAR LIMITED WARRANTY
Swiss Madison® products are made with quality materials and excellent craftsmanship to provide our customers with beautiful, durable, long-lasting products. Should there be any defects in materials or craftsmanship under regular use that are discovered within the first year of installation, Swiss Madison® will provide replacement parts at no charge, or at its discretion, replace any product or part of the product that is deemed defective, under normal installation, use, service or maintenance. This warranty applies only to the original purchaser. Proof of purchase will be required in the instance of a claim.
Swiss Madison® recommends all installations of Swiss Madison® products to be conducted by a licensed, professional plumber or contractor. Swiss Madison® will not be held responsible for any damage or product failure due to improper installation, misuse, or failure to utilize a licensed professional for installation. Swiss Madison® is not responsible for any installation or removal costs.
This One Year Limited Warranty Will Be Voided If:
- The installation recommendations were not followed by the installer
- The product has been moved from its initial place of installation
- The product has in any way been modified from its packaged state
- The product has been subjected to improper maintenance, abuse, misuse, excessive use of chemicals, accidents, or other damages, etc.
Swiss Madison® makes no implication that its products comply with any local building or plumbing codes. It is the consumer’s responsibility and obligation to determine local code compliance prior to and during installation. This warranty extends only to the original purchaser and first consumer.
Swiss Madison® is not responsible for any special, incidental or consequential damages associated with the installation, replacement, return or use of the original purchaser’s product. This includes, but is not limited to: freight costs, labor, travel time, lost profit, home damages and other contingent liabilities and costs (including, without limitation, costs associated with ‘professionals’ or ‘experts’, investigations, audits, analyses, attorneys and any other professional/hired services).
The Swiss Madison® warranty is a comprehensive and explicit limit of liability. All items not disclosed within the warranty are not addressable within the responsibility of Swiss Madison®. Certain states have variances regarding implied warranties; in those situations, we remain fully compliant.
If you have any questions or concerns, please contact us directlyat 1-434-MADISON (623-4766)
WARNING: Contents of your order may contain sharp and possibly other harmful pieces and may cause hazard to children and adults. Swiss Madison® is not responsible in any way for personal damages.
References
[xyz-ips snippet=”download-snippet”]