Tag: Installation
-
Toshiba Magmeter Installation Manual
Installation Manual Toshiba Magmeter (for remote installation and configuration)(LF622; LF232 converters: LF654, GF632 and LF664 detectors) NOTE: CHECK THE OPERATION MANUAL FOR SAFETY AND STORAGE PRECAUTIONS BEFORE INSTALLATION!! 1.Installation and wiring. Install meter in accordance to the installation instructions and wire unit according to the wiring diagrams shown in the operational manual. For signal and…
-
Keypad Entry with Built-in Alarm FE576 Installation Instructions
24046435 Keypad Entry with Built-in Alarm Installation Instructions Model FE576 Tools Needed Phillips screwdriver Optional Tools Tape Measure Pencil Flathead Screwdriver Wood Block Hamme Exterior Keypad, Alarm Interior Optional Latch Faceplate Batteries Pin Wrench Important Notes DO NOT use a power drill for installation! Use a screwdriver to remove product from packaging. Install and test…
-
Schlage Custom FC21 Combined Interior Lock Installation Manual
P518-149 Installation Instructions Model FC21, Combined interior This lock can be installed as passage (hall/closet) or privacy (bed/bath). See the included Privacy function kit. a. Knob/Lever b. Trim c. Exterior chassis d. Latch e. Interior chassis f. Chassis screws g. Backplate h. Faceplate i. Drive-in faceplate j. Latch/strike screws k. Strike…
-
Schlage Control Smart Deadbolt FE410F Installation Manual
Schlage Control™ Smart Deadbolt with Engage Technology Model FE410F Door Preparation Instructions for Door with No Holes Tools Needed Pencil Pencil Drill Bits Needed Drill and Drill Bits Bit Sizes: ¹⁄₈”, 1” Hole Saw Hole Saws 1″ 2¹⁄₈” Chisel Chisel Hammer Hammer 1 Measure door thickness. If the door is thinner than 1³⁄₈,” or…
-
Schlage JD60/JD62 Single Cylinder Deadbolt Installation Manual
JD60/JD62Installation Instructions A. Mounting Screws (2)B. Inside CylinderC. ThumbturnD. DeadboltE. Outside CylinderF. KeyG. Faceplate (choice of 3)H. Latch/Strike Screws (4)J. Strike 1 Choose Faceplate to Match Door 2 Choose Deadbolt Backset 3 Install Deadbolt 4 Install Outside Cylinder Align holes with notches before installing 5 Install Thumbturn (Single Cylinder Functions) OR Install Inside Cylinder…
-
Schlage Control Smart Deadbolt Installation Manual
Schlage Control Smart Deadbolt Installation Manual OVERVIEW OF THE LOCKSET (1) ENTER / LOCK BUTTON Red light: Represents an incorrect entry or the unit is programming mode. Yellow light: Flashes when the batteries are low in power. Green light: Represents a correct entry. Press to activate or lock the lockset. (2) KEYPAD Unlocks the lockset…
-
Home Keypad Lock BE369 Installation Manual
Installation Manual Home Keypad Lock BE369 1.Important Information Lock comes preset with a default Programming Code. Lock comes preset with two default User Codes Need Help? (888) 805-9837 (U.S.A./Canada) Tools Needed Phillips screwdriver Tape Measure Pencil Optional Flathead Screwdriver Wood Block Hammer Do not use a power drill for installation …
-
Schlage Smart Lock Installation Manual
INSTALLATION INSTRUCTIONS FOR 1. Safety Information Read the precautions and instructions in this manual before installing and using this lock. Save this manual for future reference. A. Do not attempt to disassemble any internal components of the lockset. Doing so will void the limited warranty. B. Do not drop or hit the lockset. Too much…
-
Timken Tapered Roller Bearing Housed Units Installation and Lubrication Instructions
Timken Tapered Roller Bearing Housed Units Installation and Lubrication Instructions – Timken Tapered Roller Bearing Housed Units Installation and Lubrication Instructions –
