Tag: Schlage Custom
-
Schlage Custom FC21 Combined Interior Lock Installation Manual
P518-149 Installation Instructions Model FC21, Combined interior This lock can be installed as passage (hall/closet) or privacy (bed/bath). See the included Privacy function kit. a. Knob/Lever b. Trim c. Exterior chassis d. Latch e. Interior chassis f. Chassis screws g. Backplate h. Faceplate i. Drive-in faceplate j. Latch/strike screws k. Strike…
-
Schlage Custom Handleset FC60 Installation Instructions
Model FC60, Handleset a. Cylinder b. Cylinder ring c. Keys (2) d. Bolt e. Bolt strike f. Reinforcement strike g. Reinforcement screws h. Thumbturn i. Thumbturn screws j. Handle k. Latch l. Latch strike m. Latch/Bolt/Strike screws (8) n. Chassis o. Chassis screws p. Trim q. Knob/Lever r. Washer s. Handle bolt t. Bolt cover…
-
Schlage Custom Dummy Handleset FC170/FC172 Installation Manual
Installation Instructions P518-150Model FC170/172, Dummy a. Leverb. Trimc. Chassisd. Chassis screwse. Allen wrench (Do not discard!) 1 Determine the location. 1a Measure the location of other knobs/levers in the house. 1b Mark these measurements on the dummy door. 2 Install the chassis. Screws are self-drilling. Do not pre-drill. 3 Install the trim. 4 Install the…
-
Schlage Custom One-piece Dummy Handleset FCT93 Installation Manual
Model FC93, Dummy Handleset a. Cylinderb. Cylinder ringc. Handled. Washere. Handle boltf. Bolt coverg. Thumbturnh. Thumbturn screwsi. Chassisj. Chassis screwsk. Triml. Knob/leverm. Hex wrench (Do not discard!) 1 Check door dimensions. 1a If dimensions do not match, you may need to modify your door. * May vary from 8 1/4″ (210 mm) to 9 3/4″…
-
Schlage Custom Privacy Function Kit FC21 User Manual
Privacy function kitModel FC21Keep this kit! Installing the privacy pin changes the function of the lock from non-locking to locking.AFTER installing interior chassis and trim, but before installing the knob/lever: 1 Install the pin cap. 2 Confirm slot position. Look inside hole in trim. Slot in chassis MUST be horizontal, as shown. Slot not horizontal?…
