TCE41000 10 Ton Professional High Reach Jack Stands Instruction Manual

TCE41000 10 Ton Professional High Reach Jack Stands Instruction Manual

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-448-6746, 8 a.m.- 5 p.m., PST, Monday-Friday.

PACKAGE CONTENT

SAFETY INFORMATION

Save these instructions. For your safety, read, understand, and follow the information provided with and on this pair of jack stands before using. The owner and/or operator of this equipment should have an understanding of jack stands and safe operating procedures before attempting to use. The owner and/or operator should be aware that use of this product may require special skills and knowledge. Instructions and safety information should be conveyed in the operator’s native language before use of these jack stands is authorized. If any doubt exists as to the safe and proper use of these jack stands as outlined in this factory authorized manual, remove from service immediately.

Inspect before each use. Do not use if parts are broken, bent, cracked, or damaged (including labels). Any jack stand that appears damaged in any way, operates abnormally or is missing parts, should be removed from service immediately and the manufacturer notified. If you suspect that the jack stand was subjected to a shock load (a load suddenly dropped unexpectedly upon it), immediately discontinue use until stands have been checked by a factory authorized service center (contact distributor or manufacturer for list of Authorized Service Centers). Have a qualified professional perform an annual inspection. Labels and owner’s manuals are available from manufacturer. No replacement parts are available for these devices. Replace as a matched set only.

PRODUCT DESCRIPTION

Jack Stands are designed to support rated capacity, partial vehicle loads consisting of one end of a vehicle. Use as a matched pair to support one end of a vehicle only.

NEVER use automotive jack stands to support both ends or one side of a vehicle! Use only 1 pair per vehicle. Rated capacity is per pair only!

WARNING!

1. Read-Study and understand all warning and operating instructions prior to use.
2. DO NOT OVERLOAD these jack stands beyond their rated capacity.
3. These jack stands are designed for use on hard level surfaces only.
4. Center load on saddle prior to lifting. Use as a matched pair to support one end of a vehicle only.
5. Stands are not to be use to simultaneously support both ends or one side of a vehicle.
6. No alterations shall be made to this product.
7. Failure to heed these warnings may result in damage to jack stands and/or failure resulting in personal injury or property damage.
8. Inspect before each use.

Be sure all tools and personnel are clear before lowering load. Use only attachments and/or adapters supplied by the manufacturer. Lift only on areas of the vehicle as specified by the vehicle manufacturer.

INSPECTIONInspect the Jack Stands before each use. Do not use if components are bent, broken or cracked.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and diagram below. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service.

Estimated Assembly Time: 15 minutes Tools Required for Assembly: Hammer and punch (Not included).

BEFORE USE

1. Inspect stands before each use. Do not use if components are bent, broken or cracked. Ensure that all parts move freely.
2. Verify that the product and the application are compatible. If in doubt, contact Customer Support
3. Before using this product, read the owner’s manual and familiarize yourself thoroughly with the product and the hazards associated with its improper use.
4. Always check the vehicle owners or service manual for location of proper lift and support points.

ASSEMBLY INSTRUCTIONS

CARE AND MAINTENANCE

Periodically inspect each stand. Ensure all parts move freely. Do not apply oil or grease to any portion of this product. If rust appears, sand affected area and cover with suitable utility paint. Please note that there is no replacement part applicable to this device.

StorageStore stands in upright position and in a clean, dry area.

WARRANTY

ONE YEAR LIMITED WARRANTYFor a period of one year from date of purchase, the manufacturer will repair or replace, at its option, without charge, any of its products which fail due to a defect in material or workmanship, or which fail to conform to any implied warranty not excluded hereby.

Performance of any obligation under this warranty may be obtained by returning the warranted product, including dated purchase receipt, to the retailer or distributor where the product was purchased.

For warranted service during the warranty period, the product must be returned to the retailer. Consumers should only submit product for repair directly to a warranty repair facility after the product warranty has expired. For the nearest approved Service Repair Facility, contact 1-888-448-6746, 8a.m. — 5p.m. PST, Monday — Friday.

ALL WARRANTY SERVICE DURING THE WARRANTY PERIOD MUST BE HANDLED DIRECTLY THROUGH THE RETAILER.

Except where such limitations and exclusions are specifically prohibited by applicable law, (1) the CONSUMER’S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS DESCRIBED ABOVE, and (2) THE MANUFACTURER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER, and (3) THE DURATION OF ANY AND ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO A PERIOD OF ONE YEAR FROM DATE OF PURCHASE.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department at 1-888-448-6746, 8 a.m. – 5 p.m., PST, Monday – Friday.

Not all components of the jack are replacement items but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give model number, serial number and description below.

report this ad